e8a709dc2a
There's up to 4 versions of SPE now. Let's add the version that's been detected to the driver's informational print out. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230206204746.1452942-1-robh@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
1340 lines
35 KiB
C
1340 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Perf support for the Statistical Profiling Extension, introduced as
|
|
* part of ARMv8.2.
|
|
*
|
|
* Copyright (C) 2016 ARM Limited
|
|
*
|
|
* Author: Will Deacon <will.deacon@arm.com>
|
|
*/
|
|
|
|
#define PMUNAME "arm_spe"
|
|
#define DRVNAME PMUNAME "_pmu"
|
|
#define pr_fmt(fmt) DRVNAME ": " fmt
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/cpuhotplug.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/perf_event.h>
|
|
#include <linux/perf/arm_pmu.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <asm/barrier.h>
|
|
#include <asm/cpufeature.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/sysreg.h>
|
|
|
|
/*
|
|
* Cache if the event is allowed to trace Context information.
|
|
* This allows us to perform the check, i.e, perfmon_capable(),
|
|
* in the context of the event owner, once, during the event_init().
|
|
*/
|
|
#define SPE_PMU_HW_FLAGS_CX 0x00001
|
|
|
|
static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_CX);
|
|
|
|
static void set_spe_event_has_cx(struct perf_event *event)
|
|
{
|
|
if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
|
|
event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
|
|
}
|
|
|
|
static bool get_spe_event_has_cx(struct perf_event *event)
|
|
{
|
|
return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX);
|
|
}
|
|
|
|
#define ARM_SPE_BUF_PAD_BYTE 0
|
|
|
|
struct arm_spe_pmu_buf {
|
|
int nr_pages;
|
|
bool snapshot;
|
|
void *base;
|
|
};
|
|
|
|
struct arm_spe_pmu {
|
|
struct pmu pmu;
|
|
struct platform_device *pdev;
|
|
cpumask_t supported_cpus;
|
|
struct hlist_node hotplug_node;
|
|
|
|
int irq; /* PPI */
|
|
u16 pmsver;
|
|
u16 min_period;
|
|
u16 counter_sz;
|
|
|
|
#define SPE_PMU_FEAT_FILT_EVT (1UL << 0)
|
|
#define SPE_PMU_FEAT_FILT_TYP (1UL << 1)
|
|
#define SPE_PMU_FEAT_FILT_LAT (1UL << 2)
|
|
#define SPE_PMU_FEAT_ARCH_INST (1UL << 3)
|
|
#define SPE_PMU_FEAT_LDS (1UL << 4)
|
|
#define SPE_PMU_FEAT_ERND (1UL << 5)
|
|
#define SPE_PMU_FEAT_INV_FILT_EVT (1UL << 6)
|
|
#define SPE_PMU_FEAT_DEV_PROBED (1UL << 63)
|
|
u64 features;
|
|
|
|
u16 max_record_sz;
|
|
u16 align;
|
|
struct perf_output_handle __percpu *handle;
|
|
};
|
|
|
|
#define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
|
|
|
|
/* Convert a free-running index from perf into an SPE buffer offset */
|
|
#define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
|
|
|
|
/* Keep track of our dynamic hotplug state */
|
|
static enum cpuhp_state arm_spe_pmu_online;
|
|
|
|
enum arm_spe_pmu_buf_fault_action {
|
|
SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
|
|
SPE_PMU_BUF_FAULT_ACT_FATAL,
|
|
SPE_PMU_BUF_FAULT_ACT_OK,
|
|
};
|
|
|
|
/* This sysfs gunk was really good fun to write. */
|
|
enum arm_spe_pmu_capabilities {
|
|
SPE_PMU_CAP_ARCH_INST = 0,
|
|
SPE_PMU_CAP_ERND,
|
|
SPE_PMU_CAP_FEAT_MAX,
|
|
SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
|
|
SPE_PMU_CAP_MIN_IVAL,
|
|
};
|
|
|
|
static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
|
|
[SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST,
|
|
[SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND,
|
|
};
|
|
|
|
static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
|
|
{
|
|
if (cap < SPE_PMU_CAP_FEAT_MAX)
|
|
return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
|
|
|
|
switch (cap) {
|
|
case SPE_PMU_CAP_CNT_SZ:
|
|
return spe_pmu->counter_sz;
|
|
case SPE_PMU_CAP_MIN_IVAL:
|
|
return spe_pmu->min_period;
|
|
default:
|
|
WARN(1, "unknown cap %d\n", cap);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t arm_spe_pmu_cap_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
|
|
struct dev_ext_attribute *ea =
|
|
container_of(attr, struct dev_ext_attribute, attr);
|
|
int cap = (long)ea->var;
|
|
|
|
return sysfs_emit(buf, "%u\n", arm_spe_pmu_cap_get(spe_pmu, cap));
|
|
}
|
|
|
|
#define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \
|
|
&((struct dev_ext_attribute[]) { \
|
|
{ __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \
|
|
})[0].attr.attr
|
|
|
|
#define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \
|
|
SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
|
|
|
|
static struct attribute *arm_spe_pmu_cap_attr[] = {
|
|
SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
|
|
SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
|
|
SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
|
|
SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group arm_spe_pmu_cap_group = {
|
|
.name = "caps",
|
|
.attrs = arm_spe_pmu_cap_attr,
|
|
};
|
|
|
|
/* User ABI */
|
|
#define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */
|
|
#define ATTR_CFG_FLD_ts_enable_LO 0
|
|
#define ATTR_CFG_FLD_ts_enable_HI 0
|
|
#define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */
|
|
#define ATTR_CFG_FLD_pa_enable_LO 1
|
|
#define ATTR_CFG_FLD_pa_enable_HI 1
|
|
#define ATTR_CFG_FLD_pct_enable_CFG config /* PMSCR_EL1.PCT */
|
|
#define ATTR_CFG_FLD_pct_enable_LO 2
|
|
#define ATTR_CFG_FLD_pct_enable_HI 2
|
|
#define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */
|
|
#define ATTR_CFG_FLD_jitter_LO 16
|
|
#define ATTR_CFG_FLD_jitter_HI 16
|
|
#define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */
|
|
#define ATTR_CFG_FLD_branch_filter_LO 32
|
|
#define ATTR_CFG_FLD_branch_filter_HI 32
|
|
#define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */
|
|
#define ATTR_CFG_FLD_load_filter_LO 33
|
|
#define ATTR_CFG_FLD_load_filter_HI 33
|
|
#define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
|
|
#define ATTR_CFG_FLD_store_filter_LO 34
|
|
#define ATTR_CFG_FLD_store_filter_HI 34
|
|
|
|
#define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
|
|
#define ATTR_CFG_FLD_event_filter_LO 0
|
|
#define ATTR_CFG_FLD_event_filter_HI 63
|
|
|
|
#define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */
|
|
#define ATTR_CFG_FLD_min_latency_LO 0
|
|
#define ATTR_CFG_FLD_min_latency_HI 11
|
|
|
|
#define ATTR_CFG_FLD_inv_event_filter_CFG config3 /* PMSNEVFR_EL1 */
|
|
#define ATTR_CFG_FLD_inv_event_filter_LO 0
|
|
#define ATTR_CFG_FLD_inv_event_filter_HI 63
|
|
|
|
/* Why does everything I do descend into this? */
|
|
#define __GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
|
|
(lo) == (hi) ? #cfg ":" #lo "\n" : #cfg ":" #lo "-" #hi
|
|
|
|
#define _GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
|
|
__GEN_PMU_FORMAT_ATTR(cfg, lo, hi)
|
|
|
|
#define GEN_PMU_FORMAT_ATTR(name) \
|
|
PMU_FORMAT_ATTR(name, \
|
|
_GEN_PMU_FORMAT_ATTR(ATTR_CFG_FLD_##name##_CFG, \
|
|
ATTR_CFG_FLD_##name##_LO, \
|
|
ATTR_CFG_FLD_##name##_HI))
|
|
|
|
#define _ATTR_CFG_GET_FLD(attr, cfg, lo, hi) \
|
|
((((attr)->cfg) >> lo) & GENMASK(hi - lo, 0))
|
|
|
|
#define ATTR_CFG_GET_FLD(attr, name) \
|
|
_ATTR_CFG_GET_FLD(attr, \
|
|
ATTR_CFG_FLD_##name##_CFG, \
|
|
ATTR_CFG_FLD_##name##_LO, \
|
|
ATTR_CFG_FLD_##name##_HI)
|
|
|
|
GEN_PMU_FORMAT_ATTR(ts_enable);
|
|
GEN_PMU_FORMAT_ATTR(pa_enable);
|
|
GEN_PMU_FORMAT_ATTR(pct_enable);
|
|
GEN_PMU_FORMAT_ATTR(jitter);
|
|
GEN_PMU_FORMAT_ATTR(branch_filter);
|
|
GEN_PMU_FORMAT_ATTR(load_filter);
|
|
GEN_PMU_FORMAT_ATTR(store_filter);
|
|
GEN_PMU_FORMAT_ATTR(event_filter);
|
|
GEN_PMU_FORMAT_ATTR(inv_event_filter);
|
|
GEN_PMU_FORMAT_ATTR(min_latency);
|
|
|
|
static struct attribute *arm_spe_pmu_formats_attr[] = {
|
|
&format_attr_ts_enable.attr,
|
|
&format_attr_pa_enable.attr,
|
|
&format_attr_pct_enable.attr,
|
|
&format_attr_jitter.attr,
|
|
&format_attr_branch_filter.attr,
|
|
&format_attr_load_filter.attr,
|
|
&format_attr_store_filter.attr,
|
|
&format_attr_event_filter.attr,
|
|
&format_attr_inv_event_filter.attr,
|
|
&format_attr_min_latency.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
|
|
struct attribute *attr,
|
|
int unused)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
|
|
|
|
if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
|
|
return 0;
|
|
|
|
return attr->mode;
|
|
}
|
|
|
|
static const struct attribute_group arm_spe_pmu_format_group = {
|
|
.name = "format",
|
|
.is_visible = arm_spe_pmu_format_attr_is_visible,
|
|
.attrs = arm_spe_pmu_formats_attr,
|
|
};
|
|
|
|
static ssize_t cpumask_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
|
|
|
|
return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
|
|
}
|
|
static DEVICE_ATTR_RO(cpumask);
|
|
|
|
static struct attribute *arm_spe_pmu_attrs[] = {
|
|
&dev_attr_cpumask.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group arm_spe_pmu_group = {
|
|
.attrs = arm_spe_pmu_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
|
|
&arm_spe_pmu_group,
|
|
&arm_spe_pmu_cap_group,
|
|
&arm_spe_pmu_format_group,
|
|
NULL,
|
|
};
|
|
|
|
/* Convert between user ABI and register values */
|
|
static u64 arm_spe_event_to_pmscr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
u64 reg = 0;
|
|
|
|
reg |= FIELD_PREP(PMSCR_EL1_TS, ATTR_CFG_GET_FLD(attr, ts_enable));
|
|
reg |= FIELD_PREP(PMSCR_EL1_PA, ATTR_CFG_GET_FLD(attr, pa_enable));
|
|
reg |= FIELD_PREP(PMSCR_EL1_PCT, ATTR_CFG_GET_FLD(attr, pct_enable));
|
|
|
|
if (!attr->exclude_user)
|
|
reg |= PMSCR_EL1_E0SPE;
|
|
|
|
if (!attr->exclude_kernel)
|
|
reg |= PMSCR_EL1_E1SPE;
|
|
|
|
if (get_spe_event_has_cx(event))
|
|
reg |= PMSCR_EL1_CX;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void arm_spe_event_sanitise_period(struct perf_event *event)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
|
|
u64 period = event->hw.sample_period;
|
|
u64 max_period = PMSIRR_EL1_INTERVAL_MASK;
|
|
|
|
if (period < spe_pmu->min_period)
|
|
period = spe_pmu->min_period;
|
|
else if (period > max_period)
|
|
period = max_period;
|
|
else
|
|
period &= max_period;
|
|
|
|
event->hw.sample_period = period;
|
|
}
|
|
|
|
static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
u64 reg = 0;
|
|
|
|
arm_spe_event_sanitise_period(event);
|
|
|
|
reg |= FIELD_PREP(PMSIRR_EL1_RND, ATTR_CFG_GET_FLD(attr, jitter));
|
|
reg |= event->hw.sample_period;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
u64 reg = 0;
|
|
|
|
reg |= FIELD_PREP(PMSFCR_EL1_LD, ATTR_CFG_GET_FLD(attr, load_filter));
|
|
reg |= FIELD_PREP(PMSFCR_EL1_ST, ATTR_CFG_GET_FLD(attr, store_filter));
|
|
reg |= FIELD_PREP(PMSFCR_EL1_B, ATTR_CFG_GET_FLD(attr, branch_filter));
|
|
|
|
if (reg)
|
|
reg |= PMSFCR_EL1_FT;
|
|
|
|
if (ATTR_CFG_GET_FLD(attr, event_filter))
|
|
reg |= PMSFCR_EL1_FE;
|
|
|
|
if (ATTR_CFG_GET_FLD(attr, inv_event_filter))
|
|
reg |= PMSFCR_EL1_FnE;
|
|
|
|
if (ATTR_CFG_GET_FLD(attr, min_latency))
|
|
reg |= PMSFCR_EL1_FL;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
return ATTR_CFG_GET_FLD(attr, event_filter);
|
|
}
|
|
|
|
static u64 arm_spe_event_to_pmsnevfr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
return ATTR_CFG_GET_FLD(attr, inv_event_filter);
|
|
}
|
|
|
|
static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
|
|
{
|
|
struct perf_event_attr *attr = &event->attr;
|
|
return FIELD_PREP(PMSLATFR_EL1_MINLAT, ATTR_CFG_GET_FLD(attr, min_latency));
|
|
}
|
|
|
|
static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
|
|
{
|
|
struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
|
|
u64 head = PERF_IDX2OFF(handle->head, buf);
|
|
|
|
memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len);
|
|
if (!buf->snapshot)
|
|
perf_aux_output_skip(handle, len);
|
|
}
|
|
|
|
static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
|
|
{
|
|
struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
|
|
u64 head = PERF_IDX2OFF(handle->head, buf);
|
|
u64 limit = buf->nr_pages * PAGE_SIZE;
|
|
|
|
/*
|
|
* The trace format isn't parseable in reverse, so clamp
|
|
* the limit to half of the buffer size in snapshot mode
|
|
* so that the worst case is half a buffer of records, as
|
|
* opposed to a single record.
|
|
*/
|
|
if (head < limit >> 1)
|
|
limit >>= 1;
|
|
|
|
/*
|
|
* If we're within max_record_sz of the limit, we must
|
|
* pad, move the head index and recompute the limit.
|
|
*/
|
|
if (limit - head < spe_pmu->max_record_sz) {
|
|
arm_spe_pmu_pad_buf(handle, limit - head);
|
|
handle->head = PERF_IDX2OFF(limit, buf);
|
|
limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
|
|
}
|
|
|
|
return limit;
|
|
}
|
|
|
|
static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
|
|
struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
|
|
const u64 bufsize = buf->nr_pages * PAGE_SIZE;
|
|
u64 limit = bufsize;
|
|
u64 head, tail, wakeup;
|
|
|
|
/*
|
|
* The head can be misaligned for two reasons:
|
|
*
|
|
* 1. The hardware left PMBPTR pointing to the first byte after
|
|
* a record when generating a buffer management event.
|
|
*
|
|
* 2. We used perf_aux_output_skip to consume handle->size bytes
|
|
* and CIRC_SPACE was used to compute the size, which always
|
|
* leaves one entry free.
|
|
*
|
|
* Deal with this by padding to the next alignment boundary and
|
|
* moving the head index. If we run out of buffer space, we'll
|
|
* reduce handle->size to zero and end up reporting truncation.
|
|
*/
|
|
head = PERF_IDX2OFF(handle->head, buf);
|
|
if (!IS_ALIGNED(head, spe_pmu->align)) {
|
|
unsigned long delta = roundup(head, spe_pmu->align) - head;
|
|
|
|
delta = min(delta, handle->size);
|
|
arm_spe_pmu_pad_buf(handle, delta);
|
|
head = PERF_IDX2OFF(handle->head, buf);
|
|
}
|
|
|
|
/* If we've run out of free space, then nothing more to do */
|
|
if (!handle->size)
|
|
goto no_space;
|
|
|
|
/* Compute the tail and wakeup indices now that we've aligned head */
|
|
tail = PERF_IDX2OFF(handle->head + handle->size, buf);
|
|
wakeup = PERF_IDX2OFF(handle->wakeup, buf);
|
|
|
|
/*
|
|
* Avoid clobbering unconsumed data. We know we have space, so
|
|
* if we see head == tail we know that the buffer is empty. If
|
|
* head > tail, then there's nothing to clobber prior to
|
|
* wrapping.
|
|
*/
|
|
if (head < tail)
|
|
limit = round_down(tail, PAGE_SIZE);
|
|
|
|
/*
|
|
* Wakeup may be arbitrarily far into the future. If it's not in
|
|
* the current generation, either we'll wrap before hitting it,
|
|
* or it's in the past and has been handled already.
|
|
*
|
|
* If there's a wakeup before we wrap, arrange to be woken up by
|
|
* the page boundary following it. Keep the tail boundary if
|
|
* that's lower.
|
|
*/
|
|
if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
|
|
limit = min(limit, round_up(wakeup, PAGE_SIZE));
|
|
|
|
if (limit > head)
|
|
return limit;
|
|
|
|
arm_spe_pmu_pad_buf(handle, handle->size);
|
|
no_space:
|
|
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
|
|
perf_aux_output_end(handle, 0);
|
|
return 0;
|
|
}
|
|
|
|
static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
|
|
{
|
|
struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
|
|
u64 limit = __arm_spe_pmu_next_off(handle);
|
|
u64 head = PERF_IDX2OFF(handle->head, buf);
|
|
|
|
/*
|
|
* If the head has come too close to the end of the buffer,
|
|
* then pad to the end and recompute the limit.
|
|
*/
|
|
if (limit && (limit - head < spe_pmu->max_record_sz)) {
|
|
arm_spe_pmu_pad_buf(handle, limit - head);
|
|
limit = __arm_spe_pmu_next_off(handle);
|
|
}
|
|
|
|
return limit;
|
|
}
|
|
|
|
static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
|
|
struct perf_event *event)
|
|
{
|
|
u64 base, limit;
|
|
struct arm_spe_pmu_buf *buf;
|
|
|
|
/* Start a new aux session */
|
|
buf = perf_aux_output_begin(handle, event);
|
|
if (!buf) {
|
|
event->hw.state |= PERF_HES_STOPPED;
|
|
/*
|
|
* We still need to clear the limit pointer, since the
|
|
* profiler might only be disabled by virtue of a fault.
|
|
*/
|
|
limit = 0;
|
|
goto out_write_limit;
|
|
}
|
|
|
|
limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
|
|
: arm_spe_pmu_next_off(handle);
|
|
if (limit)
|
|
limit |= PMBLIMITR_EL1_E;
|
|
|
|
limit += (u64)buf->base;
|
|
base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
|
|
write_sysreg_s(base, SYS_PMBPTR_EL1);
|
|
|
|
out_write_limit:
|
|
write_sysreg_s(limit, SYS_PMBLIMITR_EL1);
|
|
}
|
|
|
|
static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle)
|
|
{
|
|
struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
|
|
u64 offset, size;
|
|
|
|
offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base;
|
|
size = offset - PERF_IDX2OFF(handle->head, buf);
|
|
|
|
if (buf->snapshot)
|
|
handle->head = offset;
|
|
|
|
perf_aux_output_end(handle, size);
|
|
}
|
|
|
|
static void arm_spe_pmu_disable_and_drain_local(void)
|
|
{
|
|
/* Disable profiling at EL0 and EL1 */
|
|
write_sysreg_s(0, SYS_PMSCR_EL1);
|
|
isb();
|
|
|
|
/* Drain any buffered data */
|
|
psb_csync();
|
|
dsb(nsh);
|
|
|
|
/* Disable the profiling buffer */
|
|
write_sysreg_s(0, SYS_PMBLIMITR_EL1);
|
|
isb();
|
|
}
|
|
|
|
/* IRQ handling */
|
|
static enum arm_spe_pmu_buf_fault_action
|
|
arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
|
|
{
|
|
const char *err_str;
|
|
u64 pmbsr;
|
|
enum arm_spe_pmu_buf_fault_action ret;
|
|
|
|
/*
|
|
* Ensure new profiling data is visible to the CPU and any external
|
|
* aborts have been resolved.
|
|
*/
|
|
psb_csync();
|
|
dsb(nsh);
|
|
|
|
/* Ensure hardware updates to PMBPTR_EL1 are visible */
|
|
isb();
|
|
|
|
/* Service required? */
|
|
pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
|
|
if (!FIELD_GET(PMBSR_EL1_S, pmbsr))
|
|
return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
|
|
|
|
/*
|
|
* If we've lost data, disable profiling and also set the PARTIAL
|
|
* flag to indicate that the last record is corrupted.
|
|
*/
|
|
if (FIELD_GET(PMBSR_EL1_DL, pmbsr))
|
|
perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
|
|
PERF_AUX_FLAG_PARTIAL);
|
|
|
|
/* Report collisions to userspace so that it can up the period */
|
|
if (FIELD_GET(PMBSR_EL1_COLL, pmbsr))
|
|
perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
|
|
|
|
/* We only expect buffer management events */
|
|
switch (FIELD_GET(PMBSR_EL1_EC, pmbsr)) {
|
|
case PMBSR_EL1_EC_BUF:
|
|
/* Handled below */
|
|
break;
|
|
case PMBSR_EL1_EC_FAULT_S1:
|
|
case PMBSR_EL1_EC_FAULT_S2:
|
|
err_str = "Unexpected buffer fault";
|
|
goto out_err;
|
|
default:
|
|
err_str = "Unknown error code";
|
|
goto out_err;
|
|
}
|
|
|
|
/* Buffer management event */
|
|
switch (FIELD_GET(PMBSR_EL1_BUF_BSC_MASK, pmbsr)) {
|
|
case PMBSR_EL1_BUF_BSC_FULL:
|
|
ret = SPE_PMU_BUF_FAULT_ACT_OK;
|
|
goto out_stop;
|
|
default:
|
|
err_str = "Unknown buffer status code";
|
|
}
|
|
|
|
out_err:
|
|
pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n",
|
|
err_str, smp_processor_id(), pmbsr,
|
|
read_sysreg_s(SYS_PMBPTR_EL1),
|
|
read_sysreg_s(SYS_PMBLIMITR_EL1));
|
|
ret = SPE_PMU_BUF_FAULT_ACT_FATAL;
|
|
|
|
out_stop:
|
|
arm_spe_perf_aux_output_end(handle);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
|
|
{
|
|
struct perf_output_handle *handle = dev;
|
|
struct perf_event *event = handle->event;
|
|
enum arm_spe_pmu_buf_fault_action act;
|
|
|
|
if (!perf_get_aux(handle))
|
|
return IRQ_NONE;
|
|
|
|
act = arm_spe_pmu_buf_get_fault_act(handle);
|
|
if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
|
|
return IRQ_NONE;
|
|
|
|
/*
|
|
* Ensure perf callbacks have completed, which may disable the
|
|
* profiling buffer in response to a TRUNCATION flag.
|
|
*/
|
|
irq_work_run();
|
|
|
|
switch (act) {
|
|
case SPE_PMU_BUF_FAULT_ACT_FATAL:
|
|
/*
|
|
* If a fatal exception occurred then leaving the profiling
|
|
* buffer enabled is a recipe waiting to happen. Since
|
|
* fatal faults don't always imply truncation, make sure
|
|
* that the profiling buffer is disabled explicitly before
|
|
* clearing the syndrome register.
|
|
*/
|
|
arm_spe_pmu_disable_and_drain_local();
|
|
break;
|
|
case SPE_PMU_BUF_FAULT_ACT_OK:
|
|
/*
|
|
* We handled the fault (the buffer was full), so resume
|
|
* profiling as long as we didn't detect truncation.
|
|
* PMBPTR might be misaligned, but we'll burn that bridge
|
|
* when we get to it.
|
|
*/
|
|
if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) {
|
|
arm_spe_perf_aux_output_begin(handle, event);
|
|
isb();
|
|
}
|
|
break;
|
|
case SPE_PMU_BUF_FAULT_ACT_SPURIOUS:
|
|
/* We've seen you before, but GCC has the memory of a sieve. */
|
|
break;
|
|
}
|
|
|
|
/* The buffer pointers are now sane, so resume profiling. */
|
|
write_sysreg_s(0, SYS_PMBSR_EL1);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u64 arm_spe_pmsevfr_res0(u16 pmsver)
|
|
{
|
|
switch (pmsver) {
|
|
case ID_AA64DFR0_EL1_PMSVer_IMP:
|
|
return PMSEVFR_EL1_RES0_IMP;
|
|
case ID_AA64DFR0_EL1_PMSVer_V1P1:
|
|
return PMSEVFR_EL1_RES0_V1P1;
|
|
case ID_AA64DFR0_EL1_PMSVer_V1P2:
|
|
/* Return the highest version we support in default */
|
|
default:
|
|
return PMSEVFR_EL1_RES0_V1P2;
|
|
}
|
|
}
|
|
|
|
/* Perf callbacks */
|
|
static int arm_spe_pmu_event_init(struct perf_event *event)
|
|
{
|
|
u64 reg;
|
|
struct perf_event_attr *attr = &event->attr;
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
|
|
|
|
/* This is, of course, deeply driver-specific */
|
|
if (attr->type != event->pmu->type)
|
|
return -ENOENT;
|
|
|
|
if (event->cpu >= 0 &&
|
|
!cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
|
|
return -ENOENT;
|
|
|
|
if (arm_spe_event_to_pmsevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (arm_spe_event_to_pmsnevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (attr->exclude_idle)
|
|
return -EOPNOTSUPP;
|
|
|
|
/*
|
|
* Feedback-directed frequency throttling doesn't work when we
|
|
* have a buffer of samples. We'd need to manually count the
|
|
* samples in the buffer when it fills up and adjust the event
|
|
* count to reflect that. Instead, just force the user to specify
|
|
* a sample period.
|
|
*/
|
|
if (attr->freq)
|
|
return -EINVAL;
|
|
|
|
reg = arm_spe_event_to_pmsfcr(event);
|
|
if ((FIELD_GET(PMSFCR_EL1_FE, reg)) &&
|
|
!(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
|
|
return -EOPNOTSUPP;
|
|
|
|
if ((FIELD_GET(PMSFCR_EL1_FnE, reg)) &&
|
|
!(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
|
|
return -EOPNOTSUPP;
|
|
|
|
if ((FIELD_GET(PMSFCR_EL1_FT, reg)) &&
|
|
!(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
|
|
return -EOPNOTSUPP;
|
|
|
|
if ((FIELD_GET(PMSFCR_EL1_FL, reg)) &&
|
|
!(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
|
|
return -EOPNOTSUPP;
|
|
|
|
set_spe_event_has_cx(event);
|
|
reg = arm_spe_event_to_pmscr(event);
|
|
if (!perfmon_capable() &&
|
|
(reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT)))
|
|
return -EACCES;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void arm_spe_pmu_start(struct perf_event *event, int flags)
|
|
{
|
|
u64 reg;
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
|
|
|
|
hwc->state = 0;
|
|
arm_spe_perf_aux_output_begin(handle, event);
|
|
if (hwc->state)
|
|
return;
|
|
|
|
reg = arm_spe_event_to_pmsfcr(event);
|
|
write_sysreg_s(reg, SYS_PMSFCR_EL1);
|
|
|
|
reg = arm_spe_event_to_pmsevfr(event);
|
|
write_sysreg_s(reg, SYS_PMSEVFR_EL1);
|
|
|
|
if (spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT) {
|
|
reg = arm_spe_event_to_pmsnevfr(event);
|
|
write_sysreg_s(reg, SYS_PMSNEVFR_EL1);
|
|
}
|
|
|
|
reg = arm_spe_event_to_pmslatfr(event);
|
|
write_sysreg_s(reg, SYS_PMSLATFR_EL1);
|
|
|
|
if (flags & PERF_EF_RELOAD) {
|
|
reg = arm_spe_event_to_pmsirr(event);
|
|
write_sysreg_s(reg, SYS_PMSIRR_EL1);
|
|
isb();
|
|
reg = local64_read(&hwc->period_left);
|
|
write_sysreg_s(reg, SYS_PMSICR_EL1);
|
|
}
|
|
|
|
reg = arm_spe_event_to_pmscr(event);
|
|
isb();
|
|
write_sysreg_s(reg, SYS_PMSCR_EL1);
|
|
}
|
|
|
|
static void arm_spe_pmu_stop(struct perf_event *event, int flags)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
|
|
|
|
/* If we're already stopped, then nothing to do */
|
|
if (hwc->state & PERF_HES_STOPPED)
|
|
return;
|
|
|
|
/* Stop all trace generation */
|
|
arm_spe_pmu_disable_and_drain_local();
|
|
|
|
if (flags & PERF_EF_UPDATE) {
|
|
/*
|
|
* If there's a fault pending then ensure we contain it
|
|
* to this buffer, since we might be on the context-switch
|
|
* path.
|
|
*/
|
|
if (perf_get_aux(handle)) {
|
|
enum arm_spe_pmu_buf_fault_action act;
|
|
|
|
act = arm_spe_pmu_buf_get_fault_act(handle);
|
|
if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
|
|
arm_spe_perf_aux_output_end(handle);
|
|
else
|
|
write_sysreg_s(0, SYS_PMBSR_EL1);
|
|
}
|
|
|
|
/*
|
|
* This may also contain ECOUNT, but nobody else should
|
|
* be looking at period_left, since we forbid frequency
|
|
* based sampling.
|
|
*/
|
|
local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1));
|
|
hwc->state |= PERF_HES_UPTODATE;
|
|
}
|
|
|
|
hwc->state |= PERF_HES_STOPPED;
|
|
}
|
|
|
|
static int arm_spe_pmu_add(struct perf_event *event, int flags)
|
|
{
|
|
int ret = 0;
|
|
struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
|
|
|
|
if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
|
|
return -ENOENT;
|
|
|
|
hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
|
|
|
|
if (flags & PERF_EF_START) {
|
|
arm_spe_pmu_start(event, PERF_EF_RELOAD);
|
|
if (hwc->state & PERF_HES_STOPPED)
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void arm_spe_pmu_del(struct perf_event *event, int flags)
|
|
{
|
|
arm_spe_pmu_stop(event, PERF_EF_UPDATE);
|
|
}
|
|
|
|
static void arm_spe_pmu_read(struct perf_event *event)
|
|
{
|
|
}
|
|
|
|
static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
|
|
int nr_pages, bool snapshot)
|
|
{
|
|
int i, cpu = event->cpu;
|
|
struct page **pglist;
|
|
struct arm_spe_pmu_buf *buf;
|
|
|
|
/* We need at least two pages for this to work. */
|
|
if (nr_pages < 2)
|
|
return NULL;
|
|
|
|
/*
|
|
* We require an even number of pages for snapshot mode, so that
|
|
* we can effectively treat the buffer as consisting of two equal
|
|
* parts and give userspace a fighting chance of getting some
|
|
* useful data out of it.
|
|
*/
|
|
if (snapshot && (nr_pages & 1))
|
|
return NULL;
|
|
|
|
if (cpu == -1)
|
|
cpu = raw_smp_processor_id();
|
|
|
|
buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
|
|
if (!buf)
|
|
return NULL;
|
|
|
|
pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
|
|
if (!pglist)
|
|
goto out_free_buf;
|
|
|
|
for (i = 0; i < nr_pages; ++i)
|
|
pglist[i] = virt_to_page(pages[i]);
|
|
|
|
buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
|
|
if (!buf->base)
|
|
goto out_free_pglist;
|
|
|
|
buf->nr_pages = nr_pages;
|
|
buf->snapshot = snapshot;
|
|
|
|
kfree(pglist);
|
|
return buf;
|
|
|
|
out_free_pglist:
|
|
kfree(pglist);
|
|
out_free_buf:
|
|
kfree(buf);
|
|
return NULL;
|
|
}
|
|
|
|
static void arm_spe_pmu_free_aux(void *aux)
|
|
{
|
|
struct arm_spe_pmu_buf *buf = aux;
|
|
|
|
vunmap(buf->base);
|
|
kfree(buf);
|
|
}
|
|
|
|
/* Initialisation and teardown functions */
|
|
static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
|
|
{
|
|
static atomic_t pmu_idx = ATOMIC_INIT(-1);
|
|
|
|
int idx;
|
|
char *name;
|
|
struct device *dev = &spe_pmu->pdev->dev;
|
|
|
|
spe_pmu->pmu = (struct pmu) {
|
|
.module = THIS_MODULE,
|
|
.capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
|
|
.attr_groups = arm_spe_pmu_attr_groups,
|
|
/*
|
|
* We hitch a ride on the software context here, so that
|
|
* we can support per-task profiling (which is not possible
|
|
* with the invalid context as it doesn't get sched callbacks).
|
|
* This requires that userspace either uses a dummy event for
|
|
* perf_event_open, since the aux buffer is not setup until
|
|
* a subsequent mmap, or creates the profiling event in a
|
|
* disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
|
|
* once the buffer has been created.
|
|
*/
|
|
.task_ctx_nr = perf_sw_context,
|
|
.event_init = arm_spe_pmu_event_init,
|
|
.add = arm_spe_pmu_add,
|
|
.del = arm_spe_pmu_del,
|
|
.start = arm_spe_pmu_start,
|
|
.stop = arm_spe_pmu_stop,
|
|
.read = arm_spe_pmu_read,
|
|
.setup_aux = arm_spe_pmu_setup_aux,
|
|
.free_aux = arm_spe_pmu_free_aux,
|
|
};
|
|
|
|
idx = atomic_inc_return(&pmu_idx);
|
|
name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx);
|
|
if (!name) {
|
|
dev_err(dev, "failed to allocate name for pmu %d\n", idx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return perf_pmu_register(&spe_pmu->pmu, name, -1);
|
|
}
|
|
|
|
static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
|
|
{
|
|
perf_pmu_unregister(&spe_pmu->pmu);
|
|
}
|
|
|
|
static void __arm_spe_pmu_dev_probe(void *info)
|
|
{
|
|
int fld;
|
|
u64 reg;
|
|
struct arm_spe_pmu *spe_pmu = info;
|
|
struct device *dev = &spe_pmu->pdev->dev;
|
|
|
|
fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
|
|
ID_AA64DFR0_EL1_PMSVer_SHIFT);
|
|
if (!fld) {
|
|
dev_err(dev,
|
|
"unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
|
|
fld, smp_processor_id());
|
|
return;
|
|
}
|
|
spe_pmu->pmsver = (u16)fld;
|
|
|
|
/* Read PMBIDR first to determine whether or not we have access */
|
|
reg = read_sysreg_s(SYS_PMBIDR_EL1);
|
|
if (FIELD_GET(PMBIDR_EL1_P, reg)) {
|
|
dev_err(dev,
|
|
"profiling buffer owned by higher exception level\n");
|
|
return;
|
|
}
|
|
|
|
/* Minimum alignment. If it's out-of-range, then fail the probe */
|
|
fld = FIELD_GET(PMBIDR_EL1_ALIGN, reg);
|
|
spe_pmu->align = 1 << fld;
|
|
if (spe_pmu->align > SZ_2K) {
|
|
dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
|
|
fld, smp_processor_id());
|
|
return;
|
|
}
|
|
|
|
/* It's now safe to read PMSIDR and figure out what we've got */
|
|
reg = read_sysreg_s(SYS_PMSIDR_EL1);
|
|
if (FIELD_GET(PMSIDR_EL1_FE, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_FnE, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_INV_FILT_EVT;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_FT, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_FL, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_ARCHINST, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_LDS, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_LDS;
|
|
|
|
if (FIELD_GET(PMSIDR_EL1_ERND, reg))
|
|
spe_pmu->features |= SPE_PMU_FEAT_ERND;
|
|
|
|
/* This field has a spaced out encoding, so just use a look-up */
|
|
fld = FIELD_GET(PMSIDR_EL1_INTERVAL, reg);
|
|
switch (fld) {
|
|
case PMSIDR_EL1_INTERVAL_256:
|
|
spe_pmu->min_period = 256;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_512:
|
|
spe_pmu->min_period = 512;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_768:
|
|
spe_pmu->min_period = 768;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_1024:
|
|
spe_pmu->min_period = 1024;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_1536:
|
|
spe_pmu->min_period = 1536;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_2048:
|
|
spe_pmu->min_period = 2048;
|
|
break;
|
|
case PMSIDR_EL1_INTERVAL_3072:
|
|
spe_pmu->min_period = 3072;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
|
|
fld);
|
|
fallthrough;
|
|
case PMSIDR_EL1_INTERVAL_4096:
|
|
spe_pmu->min_period = 4096;
|
|
}
|
|
|
|
/* Maximum record size. If it's out-of-range, then fail the probe */
|
|
fld = FIELD_GET(PMSIDR_EL1_MAXSIZE, reg);
|
|
spe_pmu->max_record_sz = 1 << fld;
|
|
if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
|
|
dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
|
|
fld, smp_processor_id());
|
|
return;
|
|
}
|
|
|
|
fld = FIELD_GET(PMSIDR_EL1_COUNTSIZE, reg);
|
|
switch (fld) {
|
|
default:
|
|
dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
|
|
fld);
|
|
fallthrough;
|
|
case PMSIDR_EL1_COUNTSIZE_12_BIT_SAT:
|
|
spe_pmu->counter_sz = 12;
|
|
break;
|
|
case PMSIDR_EL1_COUNTSIZE_16_BIT_SAT:
|
|
spe_pmu->counter_sz = 16;
|
|
}
|
|
|
|
dev_info(dev,
|
|
"probed SPEv1.%d for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
|
|
spe_pmu->pmsver - 1, cpumask_pr_args(&spe_pmu->supported_cpus),
|
|
spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
|
|
|
|
spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
|
|
}
|
|
|
|
static void __arm_spe_pmu_reset_local(void)
|
|
{
|
|
/*
|
|
* This is probably overkill, as we have no idea where we're
|
|
* draining any buffered data to...
|
|
*/
|
|
arm_spe_pmu_disable_and_drain_local();
|
|
|
|
/* Reset the buffer base pointer */
|
|
write_sysreg_s(0, SYS_PMBPTR_EL1);
|
|
isb();
|
|
|
|
/* Clear any pending management interrupts */
|
|
write_sysreg_s(0, SYS_PMBSR_EL1);
|
|
isb();
|
|
}
|
|
|
|
static void __arm_spe_pmu_setup_one(void *info)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = info;
|
|
|
|
__arm_spe_pmu_reset_local();
|
|
enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
|
|
}
|
|
|
|
static void __arm_spe_pmu_stop_one(void *info)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = info;
|
|
|
|
disable_percpu_irq(spe_pmu->irq);
|
|
__arm_spe_pmu_reset_local();
|
|
}
|
|
|
|
static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu;
|
|
|
|
spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
|
|
if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
|
|
return 0;
|
|
|
|
__arm_spe_pmu_setup_one(spe_pmu);
|
|
return 0;
|
|
}
|
|
|
|
static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu;
|
|
|
|
spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
|
|
if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
|
|
return 0;
|
|
|
|
__arm_spe_pmu_stop_one(spe_pmu);
|
|
return 0;
|
|
}
|
|
|
|
static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
|
|
{
|
|
int ret;
|
|
cpumask_t *mask = &spe_pmu->supported_cpus;
|
|
|
|
/* Make sure we probe the hardware on a relevant CPU */
|
|
ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1);
|
|
if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED))
|
|
return -ENXIO;
|
|
|
|
/* Request our PPIs (note that the IRQ is still disabled) */
|
|
ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
|
|
spe_pmu->handle);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Register our hotplug notifier now so we don't miss any events.
|
|
* This will enable the IRQ for any supported CPUs that are already
|
|
* up.
|
|
*/
|
|
ret = cpuhp_state_add_instance(arm_spe_pmu_online,
|
|
&spe_pmu->hotplug_node);
|
|
if (ret)
|
|
free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu)
|
|
{
|
|
cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node);
|
|
free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
|
|
}
|
|
|
|
/* Driver and device probing */
|
|
static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
|
|
{
|
|
struct platform_device *pdev = spe_pmu->pdev;
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
if (!irq_is_percpu(irq)) {
|
|
dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
|
|
dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spe_pmu->irq = irq;
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id arm_spe_pmu_of_match[] = {
|
|
{ .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 },
|
|
{ /* Sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
|
|
|
|
static const struct platform_device_id arm_spe_match[] = {
|
|
{ ARMV8_SPE_PDEV_NAME, 0},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, arm_spe_match);
|
|
|
|
static int arm_spe_pmu_device_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct arm_spe_pmu *spe_pmu;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/*
|
|
* If kernelspace is unmapped when running at EL0, then the SPE
|
|
* buffer will fault and prematurely terminate the AUX session.
|
|
*/
|
|
if (arm64_kernel_unmapped_at_el0()) {
|
|
dev_warn_once(dev, "profiling buffer inaccessible. Try passing \"kpti=off\" on the kernel command line\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
|
|
if (!spe_pmu)
|
|
return -ENOMEM;
|
|
|
|
spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
|
|
if (!spe_pmu->handle)
|
|
return -ENOMEM;
|
|
|
|
spe_pmu->pdev = pdev;
|
|
platform_set_drvdata(pdev, spe_pmu);
|
|
|
|
ret = arm_spe_pmu_irq_probe(spe_pmu);
|
|
if (ret)
|
|
goto out_free_handle;
|
|
|
|
ret = arm_spe_pmu_dev_init(spe_pmu);
|
|
if (ret)
|
|
goto out_free_handle;
|
|
|
|
ret = arm_spe_pmu_perf_init(spe_pmu);
|
|
if (ret)
|
|
goto out_teardown_dev;
|
|
|
|
return 0;
|
|
|
|
out_teardown_dev:
|
|
arm_spe_pmu_dev_teardown(spe_pmu);
|
|
out_free_handle:
|
|
free_percpu(spe_pmu->handle);
|
|
return ret;
|
|
}
|
|
|
|
static int arm_spe_pmu_device_remove(struct platform_device *pdev)
|
|
{
|
|
struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
|
|
|
|
arm_spe_pmu_perf_destroy(spe_pmu);
|
|
arm_spe_pmu_dev_teardown(spe_pmu);
|
|
free_percpu(spe_pmu->handle);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver arm_spe_pmu_driver = {
|
|
.id_table = arm_spe_match,
|
|
.driver = {
|
|
.name = DRVNAME,
|
|
.of_match_table = of_match_ptr(arm_spe_pmu_of_match),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = arm_spe_pmu_device_probe,
|
|
.remove = arm_spe_pmu_device_remove,
|
|
};
|
|
|
|
static int __init arm_spe_pmu_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
|
|
arm_spe_pmu_cpu_startup,
|
|
arm_spe_pmu_cpu_teardown);
|
|
if (ret < 0)
|
|
return ret;
|
|
arm_spe_pmu_online = ret;
|
|
|
|
ret = platform_driver_register(&arm_spe_pmu_driver);
|
|
if (ret)
|
|
cpuhp_remove_multi_state(arm_spe_pmu_online);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit arm_spe_pmu_exit(void)
|
|
{
|
|
platform_driver_unregister(&arm_spe_pmu_driver);
|
|
cpuhp_remove_multi_state(arm_spe_pmu_online);
|
|
}
|
|
|
|
module_init(arm_spe_pmu_init);
|
|
module_exit(arm_spe_pmu_exit);
|
|
|
|
MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
|
|
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
|
|
MODULE_LICENSE("GPL v2");
|