b4b12b0d2f
The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()
On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>
52 lines
1.8 KiB
Plaintext
52 lines
1.8 KiB
Plaintext
What: /sys/class/mdio_bus/<bus>/<device>/attached_dev
|
|
Date: May 2017
|
|
KernelVersion: 4.13
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
Symbolic link to the network device this PHY device is
|
|
attached to.
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
|
|
Date: February 2014
|
|
KernelVersion: 3.15
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
This attribute contains the boolean value whether a given PHY
|
|
device has had any "fixup" workaround running on it, encoded as
|
|
a boolean. This information is provided to help troubleshooting
|
|
PHY configurations.
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_id
|
|
Date: November 2012
|
|
KernelVersion: 3.8
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
This attribute contains the 32-bit PHY Identifier as reported
|
|
by the device during bus enumeration, encoded in hexadecimal.
|
|
This ID is used to match the device with the appropriate
|
|
driver.
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
|
|
Date: February 2014
|
|
KernelVersion: 3.15
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
This attribute contains the PHY interface as configured by the
|
|
Ethernet driver during bus enumeration, encoded in string.
|
|
This interface mode is used to configure the Ethernet MAC with the
|
|
appropriate mode for its data lines to the PHY hardware.
|
|
Possible values are:
|
|
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
|
|
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
|
|
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
|
|
xaui, 10gbase-kr, unknown
|
|
|
|
What: /sys/class/mdio_bus/<bus>/<device>/phy_standalone
|
|
Date: May 2019
|
|
KernelVersion: 5.3
|
|
Contact: netdev@vger.kernel.org
|
|
Description:
|
|
Boolean value indicating whether the PHY device is used in
|
|
standalone mode, without a net_device associated, by PHYLINK.
|
|
Attribute created only when this is the case.
|