iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/rtlwifi/rtl8723be/sw.c
Larry Finger 5c99f04fec rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14 
This patch updates the driver to match the latest Realtek release, and
it is an important step in getting the internal code source at Realtek to match
the code in the kernel. The primary reason for this is to make it easier for
Realtek to maintain the kernel source without requiring an intermediate like me.

In this process of merging the two source repositories, there are a lot
of changes in both, and this commit is rather large.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:15 -04:00

408 lines
13 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2009-2014 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "../wifi.h"
#include "../core.h"
#include "../pci.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
#include "../rtl8723com/phy_common.h"
#include "dm.h"
#include "../rtl8723com/dm_common.h"
#include "hw.h"
#include "fw.h"
#include "../rtl8723com/fw_common.h"
#include "sw.h"
#include "trx.h"
#include "led.h"
#include "table.h"
#include "../btcoexist/rtl_btc.h"
#include <linux/vmalloc.h>
#include <linux/module.h>
static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
rtlpci->const_amdpci_aspm = 0;
/* ASPM PS mode.
* 0 - Disable ASPM,
* 1 - Enable ASPM without Clock Req,
* 2 - Enable ASPM with Clock Req,
* 3 - Alwyas Enable ASPM with Clock Req,
* 4 - Always Enable ASPM without Clock Req.
* set defult to RTL8192CE:3 RTL8192E:2
*/
rtlpci->const_pci_aspm = 3;
/*Setting for PCI-E device */
rtlpci->const_devicepci_aspm_setting = 0x03;
/*Setting for PCI-E bridge */
rtlpci->const_hostpci_aspm_setting = 0x02;
/* In Hw/Sw Radio Off situation.
* 0 - Default,
* 1 - From ASPM setting without low Mac Pwr,
* 2 - From ASPM setting with low Mac Pwr,
* 3 - Bus D3
* set default to RTL8192CE:0 RTL8192SE:2
*/
rtlpci->const_hwsw_rfoff_d3 = 0;
/* This setting works for those device with
* backdoor ASPM setting such as EPHY setting.
* 0 - Not support ASPM,
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
}
int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
{
int err = 0;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
rtl8723be_bt_reg_init(hw);
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->dm.dm_flag = 0;
rtlpriv->dm.disable_framebursting = 0;
rtlpriv->dm.thermalvalue = 0;
rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25);
rtlpriv->phy.lck_inprogress = false;
mac->ht_enable = true;
/* compatible 5G band 88ce just 2.4G band & smsp */
rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
rtlpci->receive_config = (RCR_APPFCS |
RCR_APP_MIC |
RCR_APP_ICV |
RCR_APP_PHYST_RXFF |
RCR_HTC_LOC_CTRL |
RCR_AMF |
RCR_ACF |
RCR_ADF |
RCR_AICV |
RCR_AB |
RCR_AM |
RCR_APM |
0);
rtlpci->irq_mask[0] = (u32) (IMR_PSTIMEOUT |
IMR_HSISR_IND_ON_INT |
IMR_C2HCMD |
IMR_HIGHDOK |
IMR_MGNTDOK |
IMR_BKDOK |
IMR_BEDOK |
IMR_VIDOK |
IMR_VODOK |
IMR_RDU |
IMR_ROK |
0);
rtlpci->irq_mask[1] = (u32)(IMR_RXFOVW | 0);
rtlpci->sys_irq_mask = (u32)(HSIMR_PDN_INT_EN |
HSIMR_RON_INT_EN |
0);
/* for debug level */
rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
if (rtlpriv->cfg->mod_params->disable_watchdog)
pr_info("watchdog disabled\n");
rtlpriv->psc.reg_fwctrl_lps = 3;
rtlpriv->psc.reg_max_lps_awakeintvl = 5;
/* for ASPM, you can close aspm through
* set const_support_pciaspm = 0
*/
rtl8723be_init_aspm_vars(hw);
if (rtlpriv->psc.reg_fwctrl_lps == 1)
rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
else if (rtlpriv->psc.reg_fwctrl_lps == 2)
rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
else if (rtlpriv->psc.reg_fwctrl_lps == 3)
rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
/*low power: Disable 32k */
rtlpriv->psc.low_power_enable = false;
rtlpriv->rtlhal.earlymode_enable = false;
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't alloc buffer for fw.\n");
return 1;
}
rtlpriv->max_fw_size = 0x8000;
pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Failed to request firmware!\n");
return 1;
}
return 0;
}
void rtl8723be_deinit_sw_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->rtlhal.pfirmware) {
vfree(rtlpriv->rtlhal.pfirmware);
rtlpriv->rtlhal.pfirmware = NULL;
}
}
/* get bt coexist status */
bool rtl8723be_get_btc_status(void)
{
return true;
}
static bool is_fw_header(struct rtl8723e_firmware_header *hdr)
{
return (hdr->signature & 0xfff0) == 0x5300;
}
static struct rtl_hal_ops rtl8723be_hal_ops = {
.init_sw_vars = rtl8723be_init_sw_vars,
.deinit_sw_vars = rtl8723be_deinit_sw_vars,
.read_eeprom_info = rtl8723be_read_eeprom_info,
.interrupt_recognized = rtl8723be_interrupt_recognized,
.hw_init = rtl8723be_hw_init,
.hw_disable = rtl8723be_card_disable,
.hw_suspend = rtl8723be_suspend,
.hw_resume = rtl8723be_resume,
.enable_interrupt = rtl8723be_enable_interrupt,
.disable_interrupt = rtl8723be_disable_interrupt,
.set_network_type = rtl8723be_set_network_type,
.set_chk_bssid = rtl8723be_set_check_bssid,
.set_qos = rtl8723be_set_qos,
.set_bcn_reg = rtl8723be_set_beacon_related_registers,
.set_bcn_intv = rtl8723be_set_beacon_interval,
.update_interrupt_mask = rtl8723be_update_interrupt_mask,
.get_hw_reg = rtl8723be_get_hw_reg,
.set_hw_reg = rtl8723be_set_hw_reg,
.update_rate_tbl = rtl8723be_update_hal_rate_tbl,
.fill_tx_desc = rtl8723be_tx_fill_desc,
.fill_tx_cmddesc = rtl8723be_tx_fill_cmddesc,
.query_rx_desc = rtl8723be_rx_query_desc,
.set_channel_access = rtl8723be_update_channel_access_setting,
.radio_onoff_checking = rtl8723be_gpio_radio_on_off_checking,
.set_bw_mode = rtl8723be_phy_set_bw_mode,
.switch_channel = rtl8723be_phy_sw_chnl,
.dm_watchdog = rtl8723be_dm_watchdog,
.scan_operation_backup = rtl8723be_phy_scan_operation_backup,
.set_rf_power_state = rtl8723be_phy_set_rf_power_state,
.led_control = rtl8723be_led_control,
.set_desc = rtl8723be_set_desc,
.get_desc = rtl8723be_get_desc,
.is_tx_desc_closed = rtl8723be_is_tx_desc_closed,
.tx_polling = rtl8723be_tx_polling,
.enable_hw_sec = rtl8723be_enable_hw_security_config,
.set_key = rtl8723be_set_key,
.init_sw_leds = rtl8723be_init_sw_leds,
.get_bbreg = rtl8723_phy_query_bb_reg,
.set_bbreg = rtl8723_phy_set_bb_reg,
.get_rfreg = rtl8723be_phy_query_rf_reg,
.set_rfreg = rtl8723be_phy_set_rf_reg,
.fill_h2c_cmd = rtl8723be_fill_h2c_cmd,
.get_btc_status = rtl8723be_get_btc_status,
.rx_command_packet = rtl8723be_rx_command_packet,
.is_fw_header = is_fw_header,
};
static struct rtl_mod_params rtl8723be_mod_params = {
.sw_crypto = false,
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
};
static struct rtl_hal_cfg rtl8723be_hal_cfg = {
.bar_id = 2,
.write_readback = true,
.name = "rtl8723be_pci",
.fw_name = "rtlwifi/rtl8723befw.bin",
.ops = &rtl8723be_hal_ops,
.mod_params = &rtl8723be_mod_params,
.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
.maps[SYS_CLK] = REG_SYS_CLKR,
.maps[MAC_RCR_AM] = AM,
.maps[MAC_RCR_AB] = AB,
.maps[MAC_RCR_ACRC32] = ACRC32,
.maps[MAC_RCR_ACF] = ACF,
.maps[MAC_RCR_AAP] = AAP,
.maps[MAC_HIMR] = REG_HIMR,
.maps[MAC_HIMRE] = REG_HIMRE,
.maps[MAC_HSISR] = REG_HSISR,
.maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
.maps[EFUSE_TEST] = REG_EFUSE_TEST,
.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
.maps[EFUSE_CLK] = 0,
.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
.maps[EFUSE_ANA8M] = ANA8M,
.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
.maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
.maps[RWCAM] = REG_CAMCMD,
.maps[WCAMI] = REG_CAMWRITE,
.maps[RCAMO] = REG_CAMREAD,
.maps[CAMDBG] = REG_CAMDBG,
.maps[SECR] = REG_SECCFG,
.maps[SEC_CAM_NONE] = CAM_NONE,
.maps[SEC_CAM_WEP40] = CAM_WEP40,
.maps[SEC_CAM_TKIP] = CAM_TKIP,
.maps[SEC_CAM_AES] = CAM_AES,
.maps[SEC_CAM_WEP104] = CAM_WEP104,
.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
/* .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, */ /*need check*/
.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
/* .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
/* .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
.maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
.maps[RTL_IMR_RDU] = IMR_RDU,
.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
.maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
.maps[RTL_IMR_TBDER] = IMR_TBDER,
.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
.maps[RTL_IMR_VODOK] = IMR_VODOK,
.maps[RTL_IMR_ROK] = IMR_ROK,
.maps[RTL_IMR_HSISR_IND] = IMR_HSISR_IND_ON_INT,
.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
.maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
.maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
.maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
.maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
.maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
.maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
.maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
.maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
.maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
.maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
.maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
.maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
.maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
.maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
};
static struct pci_device_id rtl8723be_pci_ids[] = {
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xB723, rtl8723be_hal_cfg)},
{},
};
MODULE_DEVICE_TABLE(pci, rtl8723be_pci_ids);
MODULE_AUTHOR("PageHe <page_he@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 8723BE 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8723befw.bin");
module_param_named(swenc, rtl8723be_mod_params.sw_crypto, bool, 0444);
module_param_named(debug, rtl8723be_mod_params.debug, int, 0444);
module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog,
bool, 0444);
MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
MODULE_PARM_DESC(fwlps, "using linked fw control power save (default 1 is open)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
static struct pci_driver rtl8723be_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl8723be_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
.driver.pm = &rtlwifi_pm_ops,
};
module_pci_driver(rtl8723be_driver);
Reference in New Issue View Git Blame Copy Permalink