ade254d7f0
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
Every GPIO controller node must have #gpio-cells property defined,
|
|
this information will be used to translate gpio-specifiers.
|
|
|
|
On CPM1 devices, all ports are using slightly different register layouts.
|
|
Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
|
|
|
|
On CPM2 devices, all ports are 32bit ports and use a common register layout.
|
|
|
|
Required properties:
|
|
- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
|
|
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
|
|
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
|
|
- #gpio-cells : Should be two. The first cell is the pin number and the
|
|
second cell is used to specify optional paramters (currently unused).
|
|
- gpio-controller : Marks the port as GPIO controller.
|
|
|
|
Example of three SOC GPIO banks defined as gpio-controller nodes:
|
|
|
|
CPM1_PIO_A: gpio-controller@950 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,cpm1-pario-bank-a";
|
|
reg = <0x950 0x10>;
|
|
gpio-controller;
|
|
};
|
|
|
|
CPM1_PIO_B: gpio-controller@ab8 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,cpm1-pario-bank-b";
|
|
reg = <0xab8 0x10>;
|
|
gpio-controller;
|
|
};
|
|
|
|
CPM1_PIO_E: gpio-controller@ac8 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,cpm1-pario-bank-e";
|
|
reg = <0xac8 0x18>;
|
|
gpio-controller;
|
|
};
|