d0fc2eaaf4
Moved Freescale SoC related bindings out of booting-without-of.txt and into their own files. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
59 lines
1.7 KiB
Plaintext
59 lines
1.7 KiB
Plaintext
* Freescale QUICC Engine module (QE)
|
|
This represents qe module that is installed on PowerQUICC II Pro.
|
|
|
|
NOTE: This is an interim binding; it should be updated to fit
|
|
in with the CPM binding later in this document.
|
|
|
|
Basically, it is a bus of devices, that could act more or less
|
|
as a complete entity (UCC, USB etc ). All of them should be siblings on
|
|
the "root" qe node, using the common properties from there.
|
|
The description below applies to the qe of MPC8360 and
|
|
more nodes and properties would be extended in the future.
|
|
|
|
i) Root QE device
|
|
|
|
Required properties:
|
|
- compatible : should be "fsl,qe";
|
|
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
|
|
- reg : offset and length of the device registers.
|
|
- bus-frequency : the clock frequency for QUICC Engine.
|
|
|
|
Recommended properties
|
|
- brg-frequency : the internal clock source frequency for baud-rate
|
|
generators in Hz.
|
|
|
|
Example:
|
|
qe@e0100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "fsl,qe";
|
|
ranges = <0 e0100000 00100000>;
|
|
reg = <e0100000 480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <179A7B00>;
|
|
}
|
|
|
|
* Multi-User RAM (MURAM)
|
|
|
|
Required properties:
|
|
- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
|
|
- mode : the could be "host" or "slave".
|
|
- ranges : Should be defined as specified in 1) to describe the
|
|
translation of MURAM addresses.
|
|
- data-only : sub-node which defines the address area under MURAM
|
|
bus that can be allocated as data/parameter
|
|
|
|
Example:
|
|
|
|
muram@10000 {
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0 00010000 0000c000>;
|
|
|
|
data-only@0{
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0 c000>;
|
|
};
|
|
};
|