linux

iv/linux

History

Greg Kroah-Hartman 31d8df9f4a MHI changes for v5.13

core:
 
 - Added support for Flash Programmer execution environment which allows the
   host machine (like x86) to flash the modem firmware to NAND or eMMC in the
   modem. The MHI bus will expose EDL channels (34, 35) and then the opensource
   QDL tool [1] can be used to flash the firmware from the host.
 - Added an internal helper for polling the MHI registers with a retry interval.
   This helper is used now to poll for the MHI ready state in MHI STATUS
   register.
 - Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel
   and Telit modems.
 - Updates to the Execution environment handling for proper downloading of the
   AMSS image from SBL (Secondary Bootloader) mode.
 - Added support for sending STOP channel command to the MHI device and also made
   changes to the MHI core for proper handling of stop and restart.
 - Fixed the runtime_pm handling in the core by forcing the device to be in wake
   mode until TX completion and allowing it to suspend for RX.
 - Added sanity checks for values read from the device to avoid crash if those
   are corrupted somehow.
 - Fixed warnings generated by sparse (W=2)
 - Couple of kernel doc cleanups in mhi.h
 
 pci_generic:
 
 - Added support for runtime PM and generic PM
 - Added Firehose channels for flashing the firmware
 - Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn
   T99W175 exposing relevant channels.
 
 [1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmByjAUACgkQVZ8R5v6R
 zvXcgQf/cmZ+E7DUXfIutbtxu0WQsprLoi12Z+tNy+0di/6HbstodNYsDJGEMCeg
 f5mXClHMTj6uO5aRu+5tgWxA6pNNBeHSpJmztbbxjrtdiAC1tZHXMFCMQ/Mj4Sv5
 IFmfHVF/wsMdFJUkfaOWC45mVhPG/TK5Wng86CUSZXUdhgC0AxY0mQqmivTjS5UE
 TA1zxCTS7ni97fceGM+V2JlebFYJJ+gwkVVgHhZMF0x+1xNldoNCxjSfMso6EeS1
 ThK8bjxYYi/eRcM1jltdv/zWlJbePOTSos5Pkm+NQsauPWtETELKq58MDhLTzD28
 aiQ8mx10gsYDGXvXpfh3nsMN1pwOfg==
 =lVaD
 -----END PGP SIGNATURE-----

Merge tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next

Manivannan writes:

MHI changes for v5.13

core:

- Added support for Flash Programmer execution environment which allows the
  host machine (like x86) to flash the modem firmware to NAND or eMMC in the
  modem. The MHI bus will expose EDL channels (34, 35) and then the opensource
  QDL tool [1] can be used to flash the firmware from the host.
- Added an internal helper for polling the MHI registers with a retry interval.
  This helper is used now to poll for the MHI ready state in MHI STATUS
  register.
- Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel
  and Telit modems.
- Updates to the Execution environment handling for proper downloading of the
  AMSS image from SBL (Secondary Bootloader) mode.
- Added support for sending STOP channel command to the MHI device and also made
  changes to the MHI core for proper handling of stop and restart.
- Fixed the runtime_pm handling in the core by forcing the device to be in wake
  mode until TX completion and allowing it to suspend for RX.
- Added sanity checks for values read from the device to avoid crash if those
  are corrupted somehow.
- Fixed warnings generated by sparse (W=2)
- Couple of kernel doc cleanups in mhi.h

pci_generic:

- Added support for runtime PM and generic PM
- Added Firehose channels for flashing the firmware
- Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn
  T99W175 exposing relevant channels.

[1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git

* tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (49 commits)
  bus: mhi: fix typo in comments for struct mhi_channel_config
  bus: mhi: core: Fix shadow declarations
  bus: mhi: pci_generic: Constify mhi_controller_config struct definitions
  bus: mhi: pci_generic: Introduce Foxconn T99W175 support
  bus: mhi: core: Sanity check values from remote device before use
  bus: mhi: pci_generic: Add FIREHOSE channels
  bus: mhi: pci_generic: Implement PCI shutdown callback
  bus: mhi: Improve documentation on channel transfer setup APIs
  bus: mhi: core: Remove __ prefix for MHI channel unprepare function
  bus: mhi: core: Check channel execution environment before issuing reset
  bus: mhi: core: Clear configuration from channel context during reset
  bus: mhi: core: Hold device wake for channel update commands
  bus: mhi: core: Update debug messages to use client device
  bus: mhi: core: Improvements to the channel handling state machine
  bus: mhi: core: Clear context for stopped channels from remove()
  bus: mhi: core: Allow sending the STOP channel command
  bus: mhi: pci_generic: Add SDX65 based modem support
  bus: mhi: core: Remove pre_init flag used for power purposes
  bus: mhi: pm: reduce PM state change verbosity
  bus: mhi: core: Fix MHI runtime_pm behavior
  ...

2021-04-11 08:53:17 +02:00

fsl-mc

Char/Misc driver patches for 5.12-rc1

2021-02-24 10:25:37 -08:00

mhi

bus: mhi: core: Fix shadow declarations

2021-04-09 10:11:05 +05:30

arm-cci.c

bus: arm-cci: remove unnecessary unreachable()

2018-05-14 01:22:49 -07:00

arm-integrator-lm.c

bus: arm-integrator-lm: Add of_node_put() before return statement