iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/iio
History
Colin Ian King e2eb179c00 iio: magnetometer: ak8974: remove redundant zero timeout check 
At the end of the delay loop timeout will always be zero
and hence the check for !timeout will always be true. Remove
the redundant check and the redundant return 0 at the end of
the function.

Fixes CoverityScan CID#1357168 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-14 13:10:04 +00:00
..
accel
iio:kfifo_buf header include push down.
2017-01-10 19:54:53 +00:00
adc
iio:adc:qcom-spmi-vadc: use div64_s64 instead of direct 64 bit division.
2017-01-10 21:13:39 +00:00
amplifiers
spi: Updates for v4.4
2015-11-05 13:15:12 -08:00
buffer
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
chemical
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
2016-10-23 22:18:27 +01:00
common
iio:kfifo_buf header include push down.
2017-01-10 19:54:53 +00:00
counter
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
dac
iio: dac: ad5593r: Add ACPI support
2016-12-30 17:20:14 +00:00
dummy
iio:dummy: Stop enabling timestamp by default.
2017-01-10 19:54:55 +00:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
iio:kfifo_buf header include push down.
2017-01-10 19:54:53 +00:00
health
First round of IIO new device support, features and cleanups for the 4.8 cycle.
2016-06-09 09:15:58 -07:00
humidity
iio: humidity: Support acpi probe for hts211
2016-12-03 08:56:28 +00:00
imu
iio: imu: add support to lsm6dsx driver
2017-01-14 12:40:37 +00:00
light
iio: light: add driver for Capella CM3605
2016-12-30 17:17:39 +00:00
magnetometer
iio: magnetometer: ak8974: remove redundant zero timeout check
2017-01-14 13:10:04 +00:00
orientation
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
2016-11-05 17:47:47 +00:00
potentiometer
iio: mcp4531: provide range of available raw values
2016-11-13 11:40:26 +00:00
potentiostat
iio: potentiostat: add LMP91000 support
2016-09-27 20:33:03 +01:00
pressure
iio: st_pressure: Export sampling frequency for lps25h and lps331ap
2016-12-30 11:33:56 +00:00
proximity
iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property
2016-12-31 15:18:31 +00:00
temperature
iio:temperature: Add support for TI TMP007 sensor
2017-01-14 10:45:05 +00:00
trigger
iio:trigger: Experimental kthread tight loop trigger (thread only)
2016-06-03 13:18:44 +01:00
iio_core_trigger.h
…
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
industrialio-buffer.c
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
industrialio-configfs.c
iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
2015-12-05 16:25:30 +00:00
industrialio-core.c
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
iio: core: fix ptr_ret.cocci warnings
2016-01-20 17:09:18 -08:00
industrialio-trigger.c
iio:trigger: Add helper function to verify that a trigger belongs to the same device
2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
iio: Support triggered events
2015-08-27 20:47:09 +01:00
inkern.c
iio: inkern: pass through raw values if no scaling
2017-01-14 12:20:18 +00:00
Kconfig
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
Makefile
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00