69c02f9593
Testing g_ether results in the following: [ 1.648022] using random self ethernet address [ 1.652778] using random host ethernet address [ 1.660504] usb0: HOST MAC c6:28:6a:81:dc:ff [ 1.666360] usb0: MAC 7e:81:54:16:c0:c6 [ 1.670504] using random self ethernet address [ 1.675842] using random host ethernet address [ 1.682655] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 1.689332] g_ether gadget: g_ether ready [ 3.328974] irq 237: nobody cared (try booting with the "irqpoll" option) [ 3.335831] CPU: 0 PID: 1 Comm: swapper Not tainted 3.11.0-rc6-next-20130819 #1035 [ 3.343500] [<c0014258>] (unwind_backtrace+0x0/0xf0) from [<c0011b20>] (show_stack+0x10/0x14) [ 3.352098] [<c0011b20>] (show_stack+0x10/0x14) from [<c006af4c>] (__report_bad_irq+0x20/0xc0) [ 3.360763] [<c006af4c>] (__report_bad_irq+0x20/0xc0) from [<c006b3f4>] (note_interrupt+0x1d4/0x234) [ 3.369943] [<c006b3f4>] (note_interrupt+0x1d4/0x234) from [<c0069754>] (handle_irq_event_percpu+0xc4/0x268) [ 3.379815] [<c0069754>] (handle_irq_event_percpu+0xc4/0x268) from [<c0069934>] (handle_irq_event+0x3c/0x5c) [ 3.389686] [<c0069934>] (handle_irq_event+0x3c/0x5c) from [<c006bb78>] (handle_level_irq+0x8c/0xe8) [ 3.398865] [<c006bb78>] (handle_level_irq+0x8c/0xe8) from [<c0068ff0>] (generic_handle_irq+0x20/0x30) [ 3.408213] [<c0068ff0>] (generic_handle_irq+0x20/0x30) from [<c000fc9c>] (handle_IRQ+0x30/0x84) [ 3.417040] [<c000fc9c>] (handle_IRQ+0x30/0x84) from [<c0012564>] (__irq_svc+0x44/0x54) [ 3.425094] [<c0012564>] (__irq_svc+0x44/0x54) from [<c0020244>] (__do_softirq+0x90/0x268) [ 3.433400] [<c0020244>] (__do_softirq+0x90/0x268) from [<c00207d4>] (irq_exit+0x9c/0xd8) [ 3.441619] [<c00207d4>] (irq_exit+0x9c/0xd8) from [<c000fca0>] (handle_IRQ+0x34/0x84) [ 3.449577] [<c000fca0>] (handle_IRQ+0x34/0x84) from [<c0012564>] (__irq_svc+0x44/0x54) [ 3.457629] [<c0012564>] (__irq_svc+0x44/0x54) from [<c04602b0>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.467164] [<c04602b0>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c0348298>] (input_register_handler+0x98/0xb4) [ 3.477835] [<c0348298>] (input_register_handler+0x98/0xb4) from [<c064bc10>] (mousedev_init+0x30/0x60) [ 3.487275] [<c064bc10>] (mousedev_init+0x30/0x60) from [<c00088ac>] (do_one_initcall+0xe8/0x154) [ 3.496198] [<c00088ac>] (do_one_initcall+0xe8/0x154) from [<c062aabc>] (kernel_init_freeable+0xf0/0x1b4) [ 3.505810] [<c062aabc>] (kernel_init_freeable+0xf0/0x1b4) from [<c0456550>] (kernel_init+0x8/0xe4) [ 3.514899] [<c0456550>] (kernel_init+0x8/0xe4) from [<c000ee60>] (ret_from_fork+0x14/0x34) [ 3.523263] handlers: [ 3.525578] [<c0339d14>] ci_irq [ 3.528757] Disabling IRQ #237 Provide the USB0_ID pin in the usb0 node, so that g_ether can operate correctly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
366 lines
7.9 KiB
Plaintext
366 lines
7.9 KiB
Plaintext
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/include/ "imx28.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX28 Evaluation Kit";
|
|
compatible = "fsl,imx28-evk", "fsl,imx28";
|
|
|
|
memory {
|
|
reg = <0x40000000 0x08000000>;
|
|
};
|
|
|
|
apb@80000000 {
|
|
apbh@80000000 {
|
|
gpmi-nand@8000c000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
|
|
&gpmi_pins_evk>;
|
|
status = "okay";
|
|
};
|
|
|
|
ssp0: ssp@80010000 {
|
|
compatible = "fsl,imx28-mmc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_8bit_pins_a
|
|
&mmc0_cd_cfg &mmc0_sck_cfg>;
|
|
bus-width = <8>;
|
|
wp-gpios = <&gpio2 12 0>;
|
|
vmmc-supply = <®_vddio_sd0>;
|
|
status = "okay";
|
|
};
|
|
|
|
ssp1: ssp@80012000 {
|
|
compatible = "fsl,imx28-mmc";
|
|
bus-width = <8>;
|
|
wp-gpios = <&gpio0 28 0>;
|
|
};
|
|
|
|
ssp2: ssp@80014000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx28-spi";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_pins_a>;
|
|
status = "okay";
|
|
|
|
flash: m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "sst,sst25vf016b";
|
|
spi-max-frequency = <40000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
pinctrl@80018000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hog_pins_a>;
|
|
|
|
hog_pins_a: hog@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
|
|
0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
|
|
0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
|
|
0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
|
|
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
|
|
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
|
0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
|
|
0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
|
|
led_pin_gpio3_5: led_gpio3_5@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
|
|
gpmi_pins_evk: gpmi-nand-evk@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
|
|
0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
|
|
lcdif_pins_evk: lcdif-evk@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
|
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
|
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
|
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
};
|
|
|
|
lcdif@80030000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcdif_24bit_pins_a
|
|
&lcdif_pins_evk>;
|
|
lcd-supply = <®_lcd_3v3>;
|
|
display = <&display>;
|
|
status = "okay";
|
|
|
|
display: display {
|
|
bits-per-pixel = <32>;
|
|
bus-width = <24>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
|
clock-frequency = <33500000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hback-porch = <89>;
|
|
hfront-porch = <164>;
|
|
vback-porch = <23>;
|
|
vfront-porch = <10>;
|
|
hsync-len = <10>;
|
|
vsync-len = <10>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
can0: can@80032000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&can0_pins_a>;
|
|
xceiver-supply = <®_can_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
can1: can@80034000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&can1_pins_a>;
|
|
xceiver-supply = <®_can_3v3>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
apbx@80040000 {
|
|
saif0: saif@80042000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&saif0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
saif1: saif@80046000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&saif1_pins_a>;
|
|
fsl,saif-master = <&saif0>;
|
|
status = "okay";
|
|
};
|
|
|
|
lradc@80050000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c0: i2c@80058000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
status = "okay";
|
|
|
|
sgtl5000: codec@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
VDDA-supply = <®_3p3v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
clocks = <&saif0>;
|
|
};
|
|
|
|
at24@51 {
|
|
compatible = "at24,24c32";
|
|
pagesize = <32>;
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
pwm: pwm@80064000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
duart: serial@80074000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&duart_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
auart0: serial@8006a000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&auart0_pins_a>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
auart3: serial@80070000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&auart3_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
usbphy0: usbphy@8007c000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usbphy1: usbphy@8007e000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
ahb@80080000 {
|
|
usb0: usb@80080000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb0_id_pins_a>;
|
|
vbus-supply = <®_usb0_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb1: usb@80090000 {
|
|
vbus-supply = <®_usb1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
mac0: ethernet@800f0000 {
|
|
phy-mode = "rmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mac0_pins_a>;
|
|
phy-supply = <®_fec_3v3>;
|
|
phy-reset-gpios = <&gpio4 13 0>;
|
|
phy-reset-duration = <100>;
|
|
status = "okay";
|
|
};
|
|
|
|
mac1: ethernet@800f4000 {
|
|
phy-mode = "rmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mac1_pins_a>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
|
|
reg_3p3v: 3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vddio_sd0: vddio-sd0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vddio-sd0";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio3 28 0>;
|
|
};
|
|
|
|
reg_fec_3v3: fec-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fec-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 15 0>;
|
|
};
|
|
|
|
reg_usb0_vbus: usb0_vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb0_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 9 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb1_vbus: usb1_vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 8 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_lcd_3v3: lcd-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio3 30 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_can_3v3: can-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "can-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 13 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx28-evk-sgtl5000",
|
|
"fsl,mxs-audio-sgtl5000";
|
|
model = "imx28-evk-sgtl5000";
|
|
saif-controllers = <&saif0 &saif1>;
|
|
audio-codec = <&sgtl5000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pin_gpio3_5>;
|
|
|
|
user {
|
|
label = "Heartbeat";
|
|
gpios = <&gpio3 5 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 2 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
};
|