linux/drivers/net/wireless/ath/wil6210/netdev.c
Vladimir Shulman 0553640d28 wil6210: allow to handle Rx on 2 cores
Allow network stack part of Rx processing to run on separate core,
relaxing CPU utilization on the core used for Rx NAPI.

If RXHASH feature is enabled, the driver sets rxhash of each skb to 1
to enable RPS. The core for processing the rx skb is determined by RPS
mechanism according to rx_cpus bit mask which is configured at user level.
For processing skbs on different core from the core which processes
the interrupts, it is recommended not to enable core 0 in rx_cpus bit mask.

Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06 09:43:50 +03:00

243 lines
5.4 KiB
C

/*
* Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/etherdevice.h>
#include "wil6210.h"
#include "txrx.h"
static int wil_open(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
wil_dbg_misc(wil, "%s()\n", __func__);
if (debug_fw) {
wil_err(wil, "%s() while in debug_fw mode\n", __func__);
return -EINVAL;
}
return wil_up(wil);
}
static int wil_stop(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
wil_dbg_misc(wil, "%s()\n", __func__);
return wil_down(wil);
}
static int wil_change_mtu(struct net_device *ndev, int new_mtu)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
if (new_mtu < 68 || new_mtu > mtu_max) {
wil_err(wil, "invalid MTU %d\n", new_mtu);
return -EINVAL;
}
wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu);
ndev->mtu = new_mtu;
return 0;
}
static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
int ret = wil_ioctl(wil, ifr->ifr_data, cmd);
wil_dbg_misc(wil, "ioctl(0x%04x) -> %d\n", cmd, ret);
return ret;
}
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = wil_change_mtu,
.ndo_do_ioctl = wil_do_ioctl,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_rx);
int quota = budget;
int done;
wil_rx_handle(wil, &quota);
done = budget - quota;
if (done < budget) {
napi_complete(napi);
wil6210_unmask_irq_rx(wil);
wil_dbg_txrx(wil, "NAPI RX complete\n");
}
wil_dbg_txrx(wil, "NAPI RX poll(%d) done %d\n", budget, done);
return done;
}
static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_tx);
int tx_done = 0;
uint i;
/* always process ALL Tx complete, regardless budget - it is fast */
for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
struct vring *vring = &wil->vring_tx[i];
if (!vring->va)
continue;
tx_done += wil_tx_complete(wil, i);
}
if (tx_done < budget) {
napi_complete(napi);
wil6210_unmask_irq_tx(wil);
wil_dbg_txrx(wil, "NAPI TX complete\n");
}
wil_dbg_txrx(wil, "NAPI TX poll(%d) done %d\n", budget, tx_done);
return min(tx_done, budget);
}
static void wil_dev_setup(struct net_device *dev)
{
ether_setup(dev);
dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
}
void *wil_if_alloc(struct device *dev)
{
struct net_device *ndev;
struct wireless_dev *wdev;
struct wil6210_priv *wil;
struct ieee80211_channel *ch;
int rc = 0;
wdev = wil_cfg80211_init(dev);
if (IS_ERR(wdev)) {
dev_err(dev, "wil_cfg80211_init failed\n");
return wdev;
}
wil = wdev_to_wil(wdev);
wil->wdev = wdev;
wil_dbg_misc(wil, "%s()\n", __func__);
rc = wil_priv_init(wil);
if (rc) {
dev_err(dev, "wil_priv_init failed\n");
goto out_wdev;
}
wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
/* default monitor channel */
ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
ndev = alloc_netdev(0, "wlan%d", NET_NAME_UNKNOWN, wil_dev_setup);
if (!ndev) {
dev_err(dev, "alloc_netdev_mqs failed\n");
rc = -ENOMEM;
goto out_priv;
}
ndev->netdev_ops = &wil_netdev_ops;
wil_set_ethtoolops(ndev);
ndev->ieee80211_ptr = wdev;
ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
NETIF_F_SG | NETIF_F_GRO |
NETIF_F_TSO | NETIF_F_TSO6 |
NETIF_F_RXHASH;
ndev->features |= ndev->hw_features;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
netif_napi_add(ndev, &wil->napi_rx, wil6210_netdev_poll_rx,
WIL6210_NAPI_BUDGET);
netif_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
WIL6210_NAPI_BUDGET);
netif_tx_stop_all_queues(ndev);
return wil;
out_priv:
wil_priv_deinit(wil);
out_wdev:
wil_wdev_free(wil);
return ERR_PTR(rc);
}
void wil_if_free(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
wil_dbg_misc(wil, "%s()\n", __func__);
if (!ndev)
return;
wil_priv_deinit(wil);
wil_to_ndev(wil) = NULL;
free_netdev(ndev);
wil_wdev_free(wil);
}
int wil_if_add(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
int rc;
wil_dbg_misc(wil, "%s()\n", __func__);
rc = register_netdev(ndev);
if (rc < 0) {
dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
return rc;
}
return 0;
}
void wil_if_remove(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
wil_dbg_misc(wil, "%s()\n", __func__);
unregister_netdev(ndev);
}