linux/drivers/gpu/drm/ast/ast_main.c
Thomas Zimmermann 83dc1029dc drm/ast: Move detection code into PCI probe helper
Detect device type and config mode in the PCI probe helper, but leave
DRM device initialization where it is. Structures the driver probe and
setup code into a detection and an initialization phase.

A later patch can add branching to the device-initialization code. Each
chip type can have it own initializer function, if necessary.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
2023-11-28 16:17:08 +01:00

306 lines
7.7 KiB
C

/*
* Copyright 2012 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
*/
/*
* Authors: Dave Airlie <airlied@redhat.com>
*/
#include <linux/pci.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_gem.h>
#include <drm/drm_managed.h>
#include "ast_drv.h"
static void ast_detect_widescreen(struct ast_device *ast)
{
u8 jreg;
/* Check if we support wide screen */
switch (AST_GEN(ast)) {
case 1:
ast->support_wide_screen = false;
break;
default:
jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
if (!(jreg & 0x80))
ast->support_wide_screen = true;
else if (jreg & 0x01)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
if (ast->chip == AST1300)
ast->support_wide_screen = true;
if (ast->chip == AST1400)
ast->support_wide_screen = true;
if (ast->chip == AST2510)
ast->support_wide_screen = true;
if (IS_AST_GEN7(ast))
ast->support_wide_screen = true;
}
break;
}
}
static void ast_detect_tx_chip(struct ast_device *ast, bool need_post)
{
struct drm_device *dev = &ast->base;
u8 jreg;
/* Check 3rd Tx option (digital output afaik) */
ast->tx_chip_types |= AST_TX_NONE_BIT;
/*
* VGACRA3 Enhanced Color Mode Register, check if DVO is already
* enabled, in that case, assume we have a SIL164 TMDS transmitter
*
* Don't make that assumption if we the chip wasn't enabled and
* is at power-on reset, otherwise we'll incorrectly "detect" a
* SIL164 when there is none.
*/
if (!need_post) {
jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_types = AST_TX_SIL164_BIT;
}
if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) {
/*
* On AST GEN4+, look the configuration set by the SoC in
* the SOC scratch register #1 bits 11:8 (interestingly marked
* as "reserved" in the spec)
*/
jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff);
switch (jreg) {
case 0x04:
ast->tx_chip_types = AST_TX_SIL164_BIT;
break;
case 0x08:
ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL);
if (ast->dp501_fw_addr) {
/* backup firmware */
if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
drmm_kfree(dev, ast->dp501_fw_addr);
ast->dp501_fw_addr = NULL;
}
}
fallthrough;
case 0x0c:
ast->tx_chip_types = AST_TX_DP501_BIT;
}
} else if (IS_AST_GEN7(ast)) {
if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xD1, TX_TYPE_MASK) ==
ASTDP_DPMCU_TX) {
ast->tx_chip_types = AST_TX_ASTDP_BIT;
ast_dp_launch(&ast->base);
}
}
/* Print stuff for diagnostic purposes */
if (ast->tx_chip_types & AST_TX_NONE_BIT)
drm_info(dev, "Using analog VGA\n");
if (ast->tx_chip_types & AST_TX_SIL164_BIT)
drm_info(dev, "Using Sil164 TMDS transmitter\n");
if (ast->tx_chip_types & AST_TX_DP501_BIT)
drm_info(dev, "Using DP501 DisplayPort transmitter\n");
if (ast->tx_chip_types & AST_TX_ASTDP_BIT)
drm_info(dev, "Using ASPEED DisplayPort transmitter\n");
}
static int ast_get_dram_info(struct drm_device *dev)
{
struct device_node *np = dev->dev->of_node;
struct ast_device *ast = to_ast_device(dev);
uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
uint32_t denum, num, div, ref_pll, dsel;
switch (ast->config_mode) {
case ast_use_dt:
/*
* If some properties are missing, use reasonable
* defaults for GEN5
*/
if (of_property_read_u32(np, "aspeed,mcr-configuration",
&mcr_cfg))
mcr_cfg = 0x00000577;
if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
&mcr_scu_mpll))
mcr_scu_mpll = 0x000050C0;
if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
&mcr_scu_strap))
mcr_scu_strap = 0;
break;
case ast_use_p2a:
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
mcr_cfg = ast_read32(ast, 0x10004);
mcr_scu_mpll = ast_read32(ast, 0x10120);
mcr_scu_strap = ast_read32(ast, 0x10170);
break;
case ast_use_defaults:
default:
ast->dram_bus_width = 16;
ast->dram_type = AST_DRAM_1Gx16;
if (IS_AST_GEN6(ast))
ast->mclk = 800;
else
ast->mclk = 396;
return 0;
}
if (mcr_cfg & 0x40)
ast->dram_bus_width = 16;
else
ast->dram_bus_width = 32;
if (IS_AST_GEN6(ast)) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_1Gx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_4Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_8Gx16;
break;
}
} else if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_512Mx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_1Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_4Gx16;
break;
}
} else {
switch (mcr_cfg & 0x0c) {
case 0:
case 4:
ast->dram_type = AST_DRAM_512Mx16;
break;
case 8:
if (mcr_cfg & 0x40)
ast->dram_type = AST_DRAM_1Gx16;
else
ast->dram_type = AST_DRAM_512Mx32;
break;
case 0xc:
ast->dram_type = AST_DRAM_1Gx32;
break;
}
}
if (mcr_scu_strap & 0x2000)
ref_pll = 14318;
else
ref_pll = 12000;
denum = mcr_scu_mpll & 0x1f;
num = (mcr_scu_mpll & 0x3fe0) >> 5;
dsel = (mcr_scu_mpll & 0xc000) >> 14;
switch (dsel) {
case 3:
div = 0x4;
break;
case 2:
case 1:
div = 0x2;
break;
default:
div = 0x1;
break;
}
ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
return 0;
}
struct drm_device *ast_device_create(struct pci_dev *pdev,
const struct drm_driver *drv,
enum ast_chip chip,
enum ast_config_mode config_mode,
void __iomem *regs,
void __iomem *ioregs,
bool need_post)
{
struct drm_device *dev;
struct ast_device *ast;
int ret;
ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
if (IS_ERR(ast))
return ERR_CAST(ast);
dev = &ast->base;
ast->chip = chip;
ast->config_mode = config_mode;
ast->regs = regs;
ast->ioregs = ioregs;
ast_detect_widescreen(ast);
ast_detect_tx_chip(ast, need_post);
ret = ast_get_dram_info(dev);
if (ret)
return ERR_PTR(ret);
drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n",
ast->mclk, ast->dram_type, ast->dram_bus_width);
if (need_post)
ast_post_gpu(dev);
ret = ast_mm_init(ast);
if (ret)
return ERR_PTR(ret);
/* map reserved buffer */
ast->dp501_fw_buf = NULL;
if (ast->vram_size < pci_resource_len(pdev, 0)) {
ast->dp501_fw_buf = pci_iomap_range(pdev, 0, ast->vram_size, 0);
if (!ast->dp501_fw_buf)
drm_info(dev, "failed to map reserved buffer!\n");
}
ret = ast_mode_config_init(ast);
if (ret)
return ERR_PTR(ret);
return dev;
}