e4b3d38088
After the Exynos Power Management Unit (PMU) driver was converted to the platform device driver in commit14fc8b93d4
("ARM: EXYNOS: Add platform driver support for Exynos PMU") and then PMU device nodes added to Exynos4 DTs in commit7b9613aca4
("ARM: dts: add PMU syscon node for exynos4") the mipi video phy driver started failing probing, due to overlapping memory mapped register region resources. Now all the Exynos peripheral devices which have registers in the PMU region are supposed to use the regmap provided by the syscon driver. So support for regmap is added in this patch, this unfortunately creates yet another indirection into that supposedly trivial driver. The additional mutex is required because single register is used by PHY pairs (they share bit in a register). An improvement here could be to allow a PHY instance be created with a driver custom mutex, which would then be common for each PHY pair. This would eliminate one of 3 mutexes which need to be taken in the phy_power_on/ phy_power_off code path. However, I tried to keep this bug fix patch possibly simple. This change is needed to make MIPI DSI displays and MIPI CSI-2 camera sensors working again on Exynos4 boards. Cc: Pankaj Dubey <pankaj.dubey@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
200 lines
5.2 KiB
C
200 lines
5.2 KiB
C
/*
|
|
* Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon/exynos4-pmu.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */
|
|
#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4)
|
|
|
|
enum exynos_mipi_phy_id {
|
|
EXYNOS_MIPI_PHY_ID_CSIS0,
|
|
EXYNOS_MIPI_PHY_ID_DSIM0,
|
|
EXYNOS_MIPI_PHY_ID_CSIS1,
|
|
EXYNOS_MIPI_PHY_ID_DSIM1,
|
|
EXYNOS_MIPI_PHYS_NUM
|
|
};
|
|
|
|
#define is_mipi_dsim_phy_id(id) \
|
|
((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
|
|
|
|
struct exynos_mipi_video_phy {
|
|
struct video_phy_desc {
|
|
struct phy *phy;
|
|
unsigned int index;
|
|
} phys[EXYNOS_MIPI_PHYS_NUM];
|
|
spinlock_t slock;
|
|
void __iomem *regs;
|
|
struct mutex mutex;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static int __set_phy_state(struct exynos_mipi_video_phy *state,
|
|
enum exynos_mipi_phy_id id, unsigned int on)
|
|
{
|
|
const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
|
|
void __iomem *addr;
|
|
u32 val, reset;
|
|
|
|
if (is_mipi_dsim_phy_id(id))
|
|
reset = EXYNOS4_MIPI_PHY_MRESETN;
|
|
else
|
|
reset = EXYNOS4_MIPI_PHY_SRESETN;
|
|
|
|
if (state->regmap) {
|
|
mutex_lock(&state->mutex);
|
|
regmap_read(state->regmap, offset, &val);
|
|
if (on)
|
|
val |= reset;
|
|
else
|
|
val &= ~reset;
|
|
regmap_write(state->regmap, offset, val);
|
|
if (on)
|
|
val |= EXYNOS4_MIPI_PHY_ENABLE;
|
|
else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
|
|
val &= ~EXYNOS4_MIPI_PHY_ENABLE;
|
|
regmap_write(state->regmap, offset, val);
|
|
mutex_unlock(&state->mutex);
|
|
} else {
|
|
addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
|
|
|
|
spin_lock(&state->slock);
|
|
val = readl(addr);
|
|
if (on)
|
|
val |= reset;
|
|
else
|
|
val &= ~reset;
|
|
writel(val, addr);
|
|
/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */
|
|
if (on)
|
|
val |= EXYNOS4_MIPI_PHY_ENABLE;
|
|
else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
|
|
val &= ~EXYNOS4_MIPI_PHY_ENABLE;
|
|
|
|
writel(val, addr);
|
|
spin_unlock(&state->slock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define to_mipi_video_phy(desc) \
|
|
container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]);
|
|
|
|
static int exynos_mipi_video_phy_power_on(struct phy *phy)
|
|
{
|
|
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
|
|
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
|
|
|
|
return __set_phy_state(state, phy_desc->index, 1);
|
|
}
|
|
|
|
static int exynos_mipi_video_phy_power_off(struct phy *phy)
|
|
{
|
|
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
|
|
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
|
|
|
|
return __set_phy_state(state, phy_desc->index, 0);
|
|
}
|
|
|
|
static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
|
|
|
|
if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
return state->phys[args->args[0]].phy;
|
|
}
|
|
|
|
static struct phy_ops exynos_mipi_video_phy_ops = {
|
|
.power_on = exynos_mipi_video_phy_power_on,
|
|
.power_off = exynos_mipi_video_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct exynos_mipi_video_phy *state;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *phy_provider;
|
|
unsigned int i;
|
|
|
|
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
|
|
if (IS_ERR(state->regmap)) {
|
|
struct resource *res;
|
|
|
|
dev_info(dev, "regmap lookup failed: %ld\n",
|
|
PTR_ERR(state->regmap));
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
state->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(state->regs))
|
|
return PTR_ERR(state->regs);
|
|
}
|
|
|
|
dev_set_drvdata(dev, state);
|
|
spin_lock_init(&state->slock);
|
|
mutex_init(&state->mutex);
|
|
|
|
for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
|
|
struct phy *phy = devm_phy_create(dev, NULL,
|
|
&exynos_mipi_video_phy_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(dev, "failed to create PHY %d\n", i);
|
|
return PTR_ERR(phy);
|
|
}
|
|
|
|
state->phys[i].phy = phy;
|
|
state->phys[i].index = i;
|
|
phy_set_drvdata(phy, &state->phys[i]);
|
|
}
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev,
|
|
exynos_mipi_video_phy_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
|
|
{ .compatible = "samsung,s5pv210-mipi-video-phy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
|
|
|
|
static struct platform_driver exynos_mipi_video_phy_driver = {
|
|
.probe = exynos_mipi_video_phy_probe,
|
|
.driver = {
|
|
.of_match_table = exynos_mipi_video_phy_of_match,
|
|
.name = "exynos-mipi-video-phy",
|
|
}
|
|
};
|
|
module_platform_driver(exynos_mipi_video_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
|
|
MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
|
|
MODULE_LICENSE("GPL v2");
|