15c71a4c84
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230315150745.67084-117-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
586 lines
14 KiB
C
586 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* linux/sound/soc/pxa/mmp-sspa.c
|
|
* Base on pxa2xx-ssp.c
|
|
*
|
|
* Copyright (C) 2011 Marvell International Ltd.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include "mmp-sspa.h"
|
|
|
|
/*
|
|
* SSPA audio private data
|
|
*/
|
|
struct sspa_priv {
|
|
void __iomem *tx_base;
|
|
void __iomem *rx_base;
|
|
|
|
struct snd_dmaengine_dai_dma_data playback_dma_data;
|
|
struct snd_dmaengine_dai_dma_data capture_dma_data;
|
|
struct clk *clk;
|
|
struct clk *audio_clk;
|
|
struct clk *sysclk;
|
|
|
|
int running_cnt;
|
|
u32 sp;
|
|
u32 ctrl;
|
|
};
|
|
|
|
static void mmp_sspa_tx_enable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_MSL;
|
|
sspa_sp |= SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_tx_disable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_MSL;
|
|
sspa_sp &= ~SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_rx_enable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp |= SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_rx_disable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
|
|
}
|
|
|
|
static int mmp_sspa_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
|
|
clk_prepare_enable(sspa->sysclk);
|
|
clk_prepare_enable(sspa->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmp_sspa_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
|
|
clk_disable_unprepare(sspa->clk);
|
|
clk_disable_unprepare(sspa->sysclk);
|
|
}
|
|
|
|
/*
|
|
* Set the SSP ports SYSCLK.
|
|
*/
|
|
static int mmp_sspa_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct device *dev = cpu_dai->component->dev;
|
|
int ret = 0;
|
|
|
|
if (dev->of_node)
|
|
return -ENOTSUPP;
|
|
|
|
switch (clk_id) {
|
|
case MMP_SSPA_CLK_AUDIO:
|
|
ret = clk_set_rate(sspa->audio_clk, freq);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case MMP_SSPA_CLK_PLL:
|
|
case MMP_SSPA_CLK_VCXO:
|
|
/* not support yet */
|
|
return -EINVAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
|
|
int source, unsigned int freq_in,
|
|
unsigned int freq_out)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct device *dev = cpu_dai->component->dev;
|
|
int ret = 0;
|
|
|
|
if (dev->of_node)
|
|
return -ENOTSUPP;
|
|
|
|
switch (pll_id) {
|
|
case MMP_SYSCLK:
|
|
ret = clk_set_rate(sspa->sysclk, freq_out);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case MMP_SSPA_CLK:
|
|
ret = clk_set_rate(sspa->clk, freq_out);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the sspa dai format.
|
|
*/
|
|
static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
/* reset port settings */
|
|
sspa->sp = SSPA_SP_WEN | SSPA_SP_S_RST | SSPA_SP_FFLUSH;
|
|
sspa->ctrl = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
|
|
case SND_SOC_DAIFMT_BP_FP:
|
|
sspa->sp |= SSPA_SP_MSL;
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FC:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
sspa->sp |= SSPA_SP_FSP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sspa->ctrl |= SSPA_CTL_XDATDLY(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Since we are configuring the timings for the format by hand
|
|
* we have to defer some things until hw_params() where we
|
|
* know parameters like the sample size.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the SSPA audio DMA parameters and sample size.
|
|
* Can be called multiple times by oss emulation.
|
|
*/
|
|
static int mmp_sspa_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
struct device *dev = dai->component->dev;
|
|
u32 sspa_ctrl = sspa->ctrl;
|
|
int bits;
|
|
int bitval;
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S8:
|
|
bits = 8;
|
|
bitval = SSPA_CTL_8_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
bits = 16;
|
|
bitval = SSPA_CTL_16_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_3LE:
|
|
bits = 24;
|
|
bitval = SSPA_CTL_24_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bits = 32;
|
|
bitval = SSPA_CTL_32_BITS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XPH;
|
|
if (dev->of_node || params_channels(params) == 2)
|
|
sspa_ctrl |= SSPA_CTL_XPH;
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XWDLEN1(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XWDLEN2_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XWDLEN2(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XSSZ1(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XSSZ2_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XSSZ2(bitval);
|
|
|
|
sspa->sp &= ~SSPA_SP_FWID_MASK;
|
|
sspa->sp |= SSPA_SP_FWID(bits - 1);
|
|
|
|
sspa->sp &= ~SSPA_TXSP_FPER_MASK;
|
|
sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1);
|
|
|
|
if (dev->of_node) {
|
|
clk_set_rate(sspa->clk, params_rate(params) *
|
|
params_channels(params) * bits);
|
|
}
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
__raw_writel(sspa_ctrl, sspa->tx_base + SSPA_CTL);
|
|
__raw_writel(0x1, sspa->tx_base + SSPA_FIFO_UL);
|
|
} else {
|
|
__raw_writel(sspa_ctrl, sspa->rx_base + SSPA_CTL);
|
|
__raw_writel(0x0, sspa->rx_base + SSPA_FIFO_UL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
/*
|
|
* whatever playback or capture, must enable rx.
|
|
* this is a hw issue, so need check if rx has been
|
|
* enabled or not; if has been enabled by another
|
|
* stream, do not enable again.
|
|
*/
|
|
if (!sspa->running_cnt)
|
|
mmp_sspa_rx_enable(sspa);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
mmp_sspa_tx_enable(sspa);
|
|
|
|
sspa->running_cnt++;
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
sspa->running_cnt--;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
mmp_sspa_tx_disable(sspa);
|
|
|
|
/* have no capture stream, disable rx port */
|
|
if (!sspa->running_cnt)
|
|
mmp_sspa_rx_disable(sspa);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmp_sspa_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = dev_get_drvdata(dai->dev);
|
|
|
|
snd_soc_dai_init_dma_data(dai,
|
|
&sspa->playback_dma_data,
|
|
&sspa->capture_dma_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MMP_SSPA_RATES SNDRV_PCM_RATE_8000_192000
|
|
#define MMP_SSPA_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
|
|
SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | \
|
|
SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops mmp_sspa_dai_ops = {
|
|
.startup = mmp_sspa_startup,
|
|
.shutdown = mmp_sspa_shutdown,
|
|
.trigger = mmp_sspa_trigger,
|
|
.hw_params = mmp_sspa_hw_params,
|
|
.set_sysclk = mmp_sspa_set_dai_sysclk,
|
|
.set_pll = mmp_sspa_set_dai_pll,
|
|
.set_fmt = mmp_sspa_set_dai_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver mmp_sspa_dai = {
|
|
.probe = mmp_sspa_probe,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 128,
|
|
.rates = MMP_SSPA_RATES,
|
|
.formats = MMP_SSPA_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = MMP_SSPA_RATES,
|
|
.formats = MMP_SSPA_FORMATS,
|
|
},
|
|
.ops = &mmp_sspa_dai_ops,
|
|
};
|
|
|
|
#define MMP_PCM_INFO (SNDRV_PCM_INFO_MMAP | \
|
|
SNDRV_PCM_INFO_MMAP_VALID | \
|
|
SNDRV_PCM_INFO_INTERLEAVED | \
|
|
SNDRV_PCM_INFO_PAUSE | \
|
|
SNDRV_PCM_INFO_RESUME | \
|
|
SNDRV_PCM_INFO_NO_PERIOD_WAKEUP)
|
|
|
|
static const struct snd_pcm_hardware mmp_pcm_hardware[] = {
|
|
{
|
|
.info = MMP_PCM_INFO,
|
|
.period_bytes_min = 1024,
|
|
.period_bytes_max = 2048,
|
|
.periods_min = 2,
|
|
.periods_max = 32,
|
|
.buffer_bytes_max = 4096,
|
|
.fifo_size = 32,
|
|
},
|
|
{
|
|
.info = MMP_PCM_INFO,
|
|
.period_bytes_min = 1024,
|
|
.period_bytes_max = 2048,
|
|
.periods_min = 2,
|
|
.periods_max = 32,
|
|
.buffer_bytes_max = 4096,
|
|
.fifo_size = 32,
|
|
},
|
|
};
|
|
|
|
static const struct snd_dmaengine_pcm_config mmp_pcm_config = {
|
|
.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
|
|
.pcm_hardware = mmp_pcm_hardware,
|
|
.prealloc_buffer_size = 4096,
|
|
};
|
|
|
|
static int mmp_pcm_mmap(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
vm_flags_set(vma, VM_DONTEXPAND | VM_DONTDUMP);
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
return remap_pfn_range(vma, vma->vm_start,
|
|
substream->dma_buffer.addr >> PAGE_SHIFT,
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot);
|
|
}
|
|
|
|
static int mmp_sspa_open(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_component_get_drvdata(component);
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if ((__raw_readl(sspa->tx_base + SSPA_SP) & SSPA_SP_S_EN) ||
|
|
(__raw_readl(sspa->rx_base + SSPA_SP) & SSPA_SP_S_EN)) {
|
|
dev_err(component->dev,
|
|
"can't change hardware dai format: stream is in use\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
|
|
__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
|
|
|
|
sspa->sp &= ~(SSPA_SP_S_RST | SSPA_SP_FFLUSH);
|
|
__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
|
|
__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
|
|
|
|
/*
|
|
* FIXME: hw issue, for the tx serial port,
|
|
* can not config the master/slave mode;
|
|
* so must clean this bit.
|
|
* The master/slave mode has been set in the
|
|
* rx port.
|
|
*/
|
|
__raw_writel(sspa->sp & ~SSPA_SP_MSL, sspa->tx_base + SSPA_SP);
|
|
|
|
__raw_writel(sspa->ctrl, sspa->tx_base + SSPA_CTL);
|
|
__raw_writel(sspa->ctrl, sspa->rx_base + SSPA_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_close(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
pm_runtime_put_sync(component->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver mmp_sspa_component = {
|
|
.name = "mmp-sspa",
|
|
.mmap = mmp_pcm_mmap,
|
|
.open = mmp_sspa_open,
|
|
.close = mmp_sspa_close,
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
static int asoc_mmp_sspa_probe(struct platform_device *pdev)
|
|
{
|
|
struct sspa_priv *sspa;
|
|
int ret;
|
|
|
|
sspa = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct sspa_priv), GFP_KERNEL);
|
|
if (!sspa)
|
|
return -ENOMEM;
|
|
|
|
if (pdev->dev.of_node) {
|
|
sspa->rx_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(sspa->rx_base))
|
|
return PTR_ERR(sspa->rx_base);
|
|
|
|
sspa->tx_base = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(sspa->tx_base))
|
|
return PTR_ERR(sspa->tx_base);
|
|
|
|
sspa->clk = devm_clk_get(&pdev->dev, "bitclk");
|
|
if (IS_ERR(sspa->clk))
|
|
return PTR_ERR(sspa->clk);
|
|
|
|
sspa->audio_clk = devm_clk_get(&pdev->dev, "audio");
|
|
if (IS_ERR(sspa->audio_clk))
|
|
return PTR_ERR(sspa->audio_clk);
|
|
} else {
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL)
|
|
return -ENODEV;
|
|
|
|
sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30);
|
|
if (!sspa->rx_base)
|
|
return -ENOMEM;
|
|
|
|
sspa->tx_base = devm_ioremap(&pdev->dev,
|
|
res->start + 0x80, 0x30);
|
|
if (!sspa->tx_base)
|
|
return -ENOMEM;
|
|
|
|
sspa->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sspa->clk))
|
|
return PTR_ERR(sspa->clk);
|
|
|
|
sspa->audio_clk = clk_get(NULL, "mmp-audio");
|
|
if (IS_ERR(sspa->audio_clk))
|
|
return PTR_ERR(sspa->audio_clk);
|
|
|
|
sspa->sysclk = clk_get(NULL, "mmp-sysclk");
|
|
if (IS_ERR(sspa->sysclk)) {
|
|
clk_put(sspa->audio_clk);
|
|
return PTR_ERR(sspa->sysclk);
|
|
}
|
|
}
|
|
platform_set_drvdata(pdev, sspa);
|
|
|
|
sspa->playback_dma_data.maxburst = 4;
|
|
sspa->capture_dma_data.maxburst = 4;
|
|
/* You know, these addresses are actually ignored. */
|
|
sspa->capture_dma_data.addr = SSPA_D;
|
|
sspa->playback_dma_data.addr = 0x80 + SSPA_D;
|
|
|
|
if (pdev->dev.of_node) {
|
|
ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
|
|
&mmp_pcm_config, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component,
|
|
&mmp_sspa_dai, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
clk_prepare_enable(sspa->audio_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void asoc_mmp_sspa_remove(struct platform_device *pdev)
|
|
{
|
|
struct sspa_priv *sspa = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(sspa->audio_clk);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
if (pdev->dev.of_node)
|
|
return;
|
|
|
|
clk_put(sspa->audio_clk);
|
|
clk_put(sspa->sysclk);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mmp_sspa_of_match[] = {
|
|
{ .compatible = "marvell,mmp-sspa" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mmp_sspa_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver asoc_mmp_sspa_driver = {
|
|
.driver = {
|
|
.name = "mmp-sspa-dai",
|
|
.of_match_table = of_match_ptr(mmp_sspa_of_match),
|
|
},
|
|
.probe = asoc_mmp_sspa_probe,
|
|
.remove_new = asoc_mmp_sspa_remove,
|
|
};
|
|
|
|
module_platform_driver(asoc_mmp_sspa_driver);
|
|
|
|
MODULE_AUTHOR("Leo Yan <leoy@marvell.com>");
|
|
MODULE_DESCRIPTION("MMP SSPA SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:mmp-sspa-dai");
|