iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k
History
Felix Fietkau e60ac9c7a4 ath9k: make DMA stop related messages debug-only 
A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they
occur.

Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.

To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21 16:56:41 +03:00
..
ahb.c
ath9k: Add HW IDs for QCA956x
2015-01-15 14:24:57 +02:00
ani.c
ath9k: use one shot read in ath9k_hw_update_mibstats
2015-03-30 11:31:31 +03:00
ani.h
…
antenna.c
…
ar953x_initvals.h
ath9k: Update QCA953x initvals
2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h
ath9k: Update AR955x initvals
2015-01-29 10:33:21 +02:00
ar956x_initvals.h
ath9k: Add initvals for QCA956x
2015-01-15 14:24:59 +02:00
ar5008_initvals.h
…
ar5008_phy.c
ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
2015-05-26 14:02:45 +03:00
ar9001_initvals.h
…
ar9002_calib.c
ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
2015-03-30 11:31:30 +03:00
ar9002_hw.c
…
ar9002_initvals.h
…
ar9002_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9002_phy.c
ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
2015-05-26 14:02:45 +03:00
ar9002_phy.h
…
ar9003_2p2_initvals.h
…
ar9003_aic.c
ath9k: Handle MCI_STATE_AIC_CAL
2015-03-20 08:28:11 +02:00
ar9003_aic.h
ath9k: Handle MCI_STATE_AIC_CAL
2015-03-20 08:28:11 +02:00
ar9003_buffalo_initvals.h
…
ar9003_calib.c
ath9k: Enable manual peak detect calibration
2015-01-29 10:33:25 +02:00
ar9003_eeprom.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
…
ar9003_hw.c
ath9k: Register private AIC ops
2015-03-20 08:27:17 +02:00
ar9003_mac.c
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
ar9003_mac.h
…
ar9003_mci.c
ath9k: Start AIC calibration during MCI reset
2015-03-20 08:28:14 +02:00
ar9003_mci.h
ath9k: Fix GPM initialization
2015-03-03 14:55:24 +02:00
ar9003_paprd.c
…
ar9003_phy.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
ar9003_phy.h
ath9k: Add register definitions for AIC
2015-03-20 08:27:19 +02:00
ar9003_rtt.c
ath9k: Fix RTT chainmask usage
2015-03-13 15:19:36 +02:00
ar9003_rtt.h
ath9k_hw: make support for PC-OEM cards optional
2014-10-27 14:16:18 -04:00
ar9003_wow.c
ath9k: Restart TSF2 timers on wakeup
2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h
…
ar9330_1p2_initvals.h
…
ar9340_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
…
ar9462_2p1_initvals.h
…
ar9485_initvals.h
…
ar9565_1p0_initvals.h
…
ar9565_1p1_initvals.h
…
ar9580_1p0_initvals.h
ath9k: Update AR9580 initvals
2014-10-27 14:16:17 -04:00
ath9k.h
ath9k: make ath_frame_info fit into reduced-size rate_driver_data
2015-03-13 16:08:56 +02:00
beacon.c
ath9k: fix tracking of enabled AP beacons
2015-03-16 08:34:36 +02:00
btcoex.c
ath9k: Fix wlan-active gpio for the AR9003 family
2015-03-03 15:46:56 +02:00
btcoex.h
ath9k: Handle MCI_STATE_AIC_CAL_SINGLE
2015-03-20 08:27:20 +02:00
calib.c
ath9k: ath9k_hw_loadnf: use REG_RMW
2015-03-30 11:31:32 +03:00
calib.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
channel.c
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR
2014-11-19 18:46:09 +01:00
common-beacon.c
Revert "ath9k: Calculate sleep duration"
2014-09-11 14:17:20 -04:00
common-beacon.h
…
common-debug.c
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-debug.h
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-init.c
…
common-init.h
…
common-spectral.c
ath9k: Mix the received FFT bins to the random pool
2015-05-09 16:46:18 +03:00
common-spectral.h
ath9k: Move processing of FFT frames to different functions
2015-05-09 16:46:11 +03:00
common.c
Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19 15:38:48 -05:00
common.h
ath9k: fix tracking of enabled AP beacons
2015-03-16 08:34:36 +02:00
debug_sta.c
…
debug.c
ath9k: make DMA stop related messages debug-only
2015-07-21 16:56:41 +03:00
debug.h
ath9k: make DMA stop related messages debug-only
2015-07-21 16:56:41 +03:00
dfs_debug.c
…
dfs_debug.h
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.c
ath9k: DFS - add pulse chirp detection for FCC
2015-07-11 19:51:53 +03:00
dfs.h
…
dynack.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
dynack.h
ath9k: add dynamic ACK timeout estimation
2014-09-16 16:18:30 -04:00
eeprom_4k.c
ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values
2015-03-30 11:31:40 +03:00
eeprom_9287.c
ath9k: add power per-rate tables for AR9002 chips
2015-01-15 14:47:06 +02:00
eeprom_def.c
ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain
2015-03-30 11:31:43 +03:00
eeprom.c
ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW
2015-03-30 11:31:37 +03:00
eeprom.h
…
gpio.c
ath9k: add extra GPIO led support
2015-04-07 20:15:01 +03:00
hif_usb.c
ath9k_htc: Add new USB ID
2015-02-26 15:20:38 +02:00
hif_usb.h
…
htc_drv_beacon.c
ath9k_htc: add support of channel switch
2015-06-15 12:44:34 +03:00
htc_drv_debug.c
wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks
2015-02-13 21:21:38 -08:00
htc_drv_gpio.c
ath9k and ath9k_htc: rename variable "led_blink"
2015-01-27 20:06:27 +02:00
htc_drv_init.c
Major changes:
2015-06-23 01:03:18 -07:00
htc_drv_main.c
ath9k_htc: add support of channel switch
2015-06-15 12:44:34 +03:00
htc_drv_txrx.c
mac80211: remove support for IFF_PROMISC
2015-04-24 11:14:13 +02:00
htc_hst.c
ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cb
2015-01-23 21:16:02 +02:00
htc_hst.h
…
htc.h
ath9k_htc: add support of channel switch
2015-06-15 12:44:34 +03:00
hw-ops.h
ath9k: Register private AIC ops
2015-03-20 08:27:17 +02:00
hw.c
ath9k: add extra GPIO led support
2015-04-07 20:15:01 +03:00
hw.h
ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate.
2015-05-26 14:02:45 +03:00
init.c
mac80211: convert HW flags to unsigned long bitmap
2015-06-10 16:05:36 +02:00
Kconfig
ath9k_common: make sure DEBUG_FS and RELAY enabled
2014-11-19 15:50:04 -05:00
link.c
cfg80211: remove "channel" from survey names
2015-01-08 15:27:52 +01:00
mac.c
ath9k: Add QCA956x HW support
2015-01-15 14:25:03 +02:00
mac.h
ath9k: add TPC capability to TX descriptor path
2014-11-25 14:09:56 -05:00
main.c
ath9k: fix DMA stop sequence for AR9003+
2015-06-08 11:39:58 +03:00
Makefile
ath9k: Register private AIC ops
2015-03-20 08:27:17 +02:00
mci.c
ath9k: Fix GPM initialization
2015-03-03 14:55:24 +02:00
mci.h
…
pci.c
ath9k: Check WOW triggers properly
2015-02-03 15:31:04 +02:00
phy.h
…
recv.c
ath9k: make DMA stop related messages debug-only
2015-07-21 16:56:41 +03:00
reg_aic.h
ath9k: Add register definitions for AIC
2015-03-20 08:27:19 +02:00
reg_mci.h
ath9k: Mute BT properly
2015-03-03 14:55:27 +02:00
reg_wow.h
ath9k: Clear additional WoW events
2015-02-26 14:58:43 +02:00
reg.h
ath9k: add extra GPIO led support
2015-04-07 20:15:01 +03:00
tx99.c
ath9k: Unify reset API
2014-10-27 14:16:14 -04:00
wmi.c
ath9k_htc: check seq number instead of cmd id for timeout
2015-04-07 20:07:44 +03:00
wmi.h
ath9k_htc: check seq number instead of cmd id for timeout
2015-04-07 20:07:44 +03:00
wow.c
ath9k: Register correct WOW details with mac80211
2015-02-06 08:39:21 +02:00
xmit.c
ath9k: make DMA stop related messages debug-only
2015-07-21 16:56:41 +03:00