9e8d547032
Add Sunplus SoC UART Driver. SP7021 UART block contains 5 UARTs. There are UART0~4 that supported in SP7021, the features list as below. Support Full-duplex communication. Support data packet length configurable. Support stop bit number configurable. Support force break condition. Support baud rate configurable. Support error detection and report. Support RXD Noise Rejection Vote configurable. UART0 pinout only support TX/RX two pins. UART1 to UART4 pinout support TX/RX/CTS/RTS four pins. Normally UART0 used for kernel console, also can be used for normal uart. Command line set "console=ttySUP0,115200", SUP means Sunplus Uart Port. UART driver probe will create path named "/dev/ttySUPx". https://sunplus.atlassian.net/wiki/spaces/doc/pages/1873412290/13.+Universal+Asynchronous+Receiver+Transmitter+UART Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com> Link: https://lore.kernel.org/r/1645522563-17183-3-git-send-email-hammerh0314@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
97 lines
3.8 KiB
Makefile
97 lines
3.8 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for the kernel serial device drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
|
|
|
|
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
|
|
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
|
|
obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o
|
|
|
|
# These Sparc drivers have to appear before others such as 8250
|
|
# which share ttySx minor node space. Otherwise console device
|
|
# names change and other unplesantries.
|
|
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
|
|
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
|
|
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
|
|
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
|
|
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
|
|
|
|
obj-$(CONFIG_SERIAL_21285) += 21285.o
|
|
|
|
# Now bring in any enabled 8250/16450/16550 type drivers.
|
|
obj-$(CONFIG_SERIAL_8250) += 8250/
|
|
|
|
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
|
|
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
|
|
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
|
|
obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
|
|
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
|
|
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
|
|
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o
|
|
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
|
|
obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
|
|
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
|
|
obj-$(CONFIG_SERIAL_MUX) += mux.o
|
|
obj-$(CONFIG_SERIAL_MCF) += mcf.o
|
|
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
|
|
obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
|
|
obj-$(CONFIG_SERIAL_DZ) += dz.o
|
|
obj-$(CONFIG_SERIAL_ZS) += zs.o
|
|
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
|
|
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
|
|
obj-$(CONFIG_SERIAL_IMX) += imx.o
|
|
obj-$(CONFIG_SERIAL_IMX_EARLYCON) += imx_earlycon.o
|
|
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
|
|
obj-$(CONFIG_SERIAL_ICOM) += icom.o
|
|
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
|
|
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
|
|
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
|
|
obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
|
|
obj-$(CONFIG_SERIAL_JSM) += jsm/
|
|
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
|
|
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
|
|
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
|
|
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
|
|
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
|
|
obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o
|
|
obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
|
|
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
|
|
obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o
|
|
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
|
|
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
|
|
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
|
|
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
|
|
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
|
|
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
|
|
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
|
|
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
|
|
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
|
|
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
|
|
obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o
|
|
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
|
|
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
|
|
obj-$(CONFIG_SERIAL_RP2) += rp2.o
|
|
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
|
|
obj-$(CONFIG_SERIAL_FSL_LINFLEXUART) += fsl_linflexuart.o
|
|
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
|
|
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
|
|
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
|
|
obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
|
|
obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o
|
|
obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o
|
|
obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o
|
|
obj-$(CONFIG_SERIAL_OWL) += owl-uart.o
|
|
obj-$(CONFIG_SERIAL_RDA) += rda-uart.o
|
|
obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o
|
|
obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o
|
|
obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o
|
|
obj-$(CONFIG_SERIAL_SUNPLUS) += sunplus-uart.o
|
|
|
|
# GPIOLIB helpers for modem control lines
|
|
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
|
|
|
|
obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
|
|
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
|