linux/drivers/gpu/drm/tiny/ili9486.c
Danilo Krummrich 4a83c26a1d drm/gem: rename GEM CMA helpers to GEM DMA helpers
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03 18:31:49 +02:00

274 lines
6.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* DRM driver for Ilitek ILI9486 panels
*
* Copyright 2020 Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
#include <video/mipi_display.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_managed.h>
#include <drm/drm_mipi_dbi.h>
#include <drm/drm_modeset_helper.h>
#define ILI9486_ITFCTR1 0xb0
#define ILI9486_PWCTRL1 0xc2
#define ILI9486_VMCTRL1 0xc5
#define ILI9486_PGAMCTRL 0xe0
#define ILI9486_NGAMCTRL 0xe1
#define ILI9486_DGAMCTRL 0xe2
#define ILI9486_MADCTL_BGR BIT(3)
#define ILI9486_MADCTL_MV BIT(5)
#define ILI9486_MADCTL_MX BIT(6)
#define ILI9486_MADCTL_MY BIT(7)
/*
* The PiScreen/waveshare rpi-lcd-35 has a SPI to 16-bit parallel bus converter
* in front of the display controller. This means that 8-bit values have to be
* transferred as 16-bit.
*/
static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
size_t num)
{
struct spi_device *spi = mipi->spi;
void *data = par;
u32 speed_hz;
int i, ret;
__be16 *buf;
buf = kmalloc(32 * sizeof(u16), GFP_KERNEL);
if (!buf)
return -ENOMEM;
/*
* The displays are Raspberry Pi HATs and connected to the 8-bit only
* SPI controller, so 16-bit command and parameters need byte swapping
* before being transferred as 8-bit on the big endian SPI bus.
* Pixel data bytes have already been swapped before this function is
* called.
*/
buf[0] = cpu_to_be16(*cmd);
gpiod_set_value_cansleep(mipi->dc, 0);
speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 2);
ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, buf, 2);
if (ret || !num)
goto free;
/* 8-bit configuration data, not 16-bit pixel data */
if (num <= 32) {
for (i = 0; i < num; i++)
buf[i] = cpu_to_be16(par[i]);
num *= 2;
speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
data = buf;
}
gpiod_set_value_cansleep(mipi->dc, 1);
ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
free:
kfree(buf);
return ret;
}
static void waveshare_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
struct mipi_dbi *dbi = &dbidev->dbi;
u8 addr_mode;
int ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(dbidev);
if (ret < 0)
goto out_exit;
if (ret == 1)
goto out_enable;
mipi_dbi_command(dbi, ILI9486_ITFCTR1);
mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
msleep(250);
mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
mipi_dbi_command(dbi, ILI9486_PWCTRL1, 0x44);
mipi_dbi_command(dbi, ILI9486_VMCTRL1, 0x00, 0x00, 0x00, 0x00);
mipi_dbi_command(dbi, ILI9486_PGAMCTRL,
0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98,
0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x0);
mipi_dbi_command(dbi, ILI9486_NGAMCTRL,
0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
mipi_dbi_command(dbi, ILI9486_DGAMCTRL,
0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
msleep(100);
out_enable:
switch (dbidev->rotation) {
case 90:
addr_mode = ILI9486_MADCTL_MY;
break;
case 180:
addr_mode = ILI9486_MADCTL_MV;
break;
case 270:
addr_mode = ILI9486_MADCTL_MX;
break;
default:
addr_mode = ILI9486_MADCTL_MV | ILI9486_MADCTL_MY |
ILI9486_MADCTL_MX;
break;
}
addr_mode |= ILI9486_MADCTL_BGR;
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = {
.enable = waveshare_enable,
.disable = mipi_dbi_pipe_disable,
.update = mipi_dbi_pipe_update,
};
static const struct drm_display_mode waveshare_mode = {
DRM_SIMPLE_MODE(480, 320, 73, 49),
};
DEFINE_DRM_GEM_DMA_FOPS(ili9486_fops);
static const struct drm_driver ili9486_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
.fops = &ili9486_fops,
DRM_GEM_DMA_DRIVER_OPS_VMAP,
.debugfs_init = mipi_dbi_debugfs_init,
.name = "ili9486",
.desc = "Ilitek ILI9486",
.date = "20200118",
.major = 1,
.minor = 0,
};
static const struct of_device_id ili9486_of_match[] = {
{ .compatible = "waveshare,rpi-lcd-35" },
{ .compatible = "ozzmaker,piscreen" },
{},
};
MODULE_DEVICE_TABLE(of, ili9486_of_match);
static const struct spi_device_id ili9486_id[] = {
{ "ili9486", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, ili9486_id);
static int ili9486_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct mipi_dbi_dev *dbidev;
struct drm_device *drm;
struct mipi_dbi *dbi;
struct gpio_desc *dc;
u32 rotation = 0;
int ret;
dbidev = devm_drm_dev_alloc(dev, &ili9486_driver,
struct mipi_dbi_dev, drm);
if (IS_ERR(dbidev))
return PTR_ERR(dbidev);
dbi = &dbidev->dbi;
drm = &dbidev->drm;
dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(dbi->reset))
return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
if (IS_ERR(dc))
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
dbidev->backlight = devm_of_find_backlight(dev);
if (IS_ERR(dbidev->backlight))
return PTR_ERR(dbidev->backlight);
device_property_read_u32(dev, "rotation", &rotation);
ret = mipi_dbi_spi_init(spi, dbi, dc);
if (ret)
return ret;
dbi->command = waveshare_command;
dbi->read_commands = NULL;
ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs,
&waveshare_mode, rotation);
if (ret)
return ret;
drm_mode_config_reset(drm);
ret = drm_dev_register(drm, 0);
if (ret)
return ret;
spi_set_drvdata(spi, drm);
drm_fbdev_generic_setup(drm, 0);
return 0;
}
static void ili9486_remove(struct spi_device *spi)
{
struct drm_device *drm = spi_get_drvdata(spi);
drm_dev_unplug(drm);
drm_atomic_helper_shutdown(drm);
}
static void ili9486_shutdown(struct spi_device *spi)
{
drm_atomic_helper_shutdown(spi_get_drvdata(spi));
}
static struct spi_driver ili9486_spi_driver = {
.driver = {
.name = "ili9486",
.of_match_table = ili9486_of_match,
},
.id_table = ili9486_id,
.probe = ili9486_probe,
.remove = ili9486_remove,
.shutdown = ili9486_shutdown,
};
module_spi_driver(ili9486_spi_driver);
MODULE_DESCRIPTION("Ilitek ILI9486 DRM driver");
MODULE_AUTHOR("Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>");
MODULE_LICENSE("GPL");