linux/drivers/gpu/drm/tiny/panel-mipi-dbi.c
Danilo Krummrich 4a83c26a1d drm/gem: rename GEM CMA helpers to GEM DMA helpers
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03 18:31:49 +02:00

397 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* DRM driver for MIPI DBI compatible display panels
*
* Copyright 2022 Noralf Trønnes
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_managed.h>
#include <drm/drm_mipi_dbi.h>
#include <drm/drm_modes.h>
#include <drm/drm_modeset_helper.h>
#include <video/mipi_display.h>
static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I',
0, 0, 0, 0, 0, 0, 0 };
/*
* The display controller configuration is stored in a firmware file.
* The Device Tree 'compatible' property value with a '.bin' suffix is passed
* to request_firmware() to fetch this file.
*/
struct panel_mipi_dbi_config {
/* Magic string: panel_mipi_dbi_magic */
u8 magic[15];
/* Config file format version */
u8 file_format_version;
/*
* MIPI commands to execute when the display pipeline is enabled.
* This is used to configure the display controller.
*
* The commands are stored in a byte array with the format:
* command, num_parameters, [ parameter, ...], command, ...
*
* Some commands require a pause before the next command can be received.
* Inserting a delay in the command sequence is done by using the NOP command with one
* parameter: delay in miliseconds (the No Operation command is part of the MIPI Display
* Command Set where it has no parameters).
*
* Example:
* command 0x11
* sleep 120ms
* command 0xb1 parameters 0x01, 0x2c, 0x2d
* command 0x29
*
* Byte sequence:
* 0x11 0x00
* 0x00 0x01 0x78
* 0xb1 0x03 0x01 0x2c 0x2d
* 0x29 0x00
*/
u8 commands[];
};
struct panel_mipi_dbi_commands {
const u8 *buf;
size_t len;
};
static struct panel_mipi_dbi_commands *
panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw)
{
const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data;
struct panel_mipi_dbi_commands *commands;
size_t size = fw->size, commands_len;
unsigned int i = 0;
if (size < sizeof(*config) + 2) { /* At least 1 command */
dev_err(dev, "config: file size=%zu is too small\n", size);
return ERR_PTR(-EINVAL);
}
if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) {
dev_err(dev, "config: Bad magic: %15ph\n", config->magic);
return ERR_PTR(-EINVAL);
}
if (config->file_format_version != 1) {
dev_err(dev, "config: version=%u is not supported\n", config->file_format_version);
return ERR_PTR(-EINVAL);
}
drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version);
commands_len = size - sizeof(*config);
while ((i + 1) < commands_len) {
u8 command = config->commands[i++];
u8 num_parameters = config->commands[i++];
const u8 *parameters = &config->commands[i];
i += num_parameters;
if (i > commands_len) {
dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n",
command, num_parameters);
return ERR_PTR(-EINVAL);
}
if (command == 0x00 && num_parameters == 1)
drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]);
else
drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n",
command, num_parameters, parameters);
}
if (i != commands_len) {
dev_err(dev, "config: malformed command array\n");
return ERR_PTR(-EINVAL);
}
commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL);
if (!commands)
return ERR_PTR(-ENOMEM);
commands->len = commands_len;
commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL);
if (!commands->buf)
return ERR_PTR(-ENOMEM);
return commands;
}
static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev)
{
struct panel_mipi_dbi_commands *commands;
const struct firmware *fw;
const char *compatible;
char fw_name[40];
int ret;
ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible);
if (ret)
return ERR_PTR(ret);
snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible);
ret = request_firmware(&fw, fw_name, dev);
if (ret) {
dev_err(dev, "No config file found for compatible '%s' (error=%d)\n",
compatible, ret);
return ERR_PTR(ret);
}
commands = panel_mipi_dbi_check_commands(dev, fw);
release_firmware(fw);
return commands;
}
static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi,
struct panel_mipi_dbi_commands *commands)
{
unsigned int i = 0;
if (!commands)
return;
while (i < commands->len) {
u8 command = commands->buf[i++];
u8 num_parameters = commands->buf[i++];
const u8 *parameters = &commands->buf[i];
if (command == 0x00 && num_parameters == 1)
msleep(parameters[0]);
else if (num_parameters)
mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters);
else
mipi_dbi_command(dbi, command);
i += num_parameters;
}
}
static void panel_mipi_dbi_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
struct mipi_dbi *dbi = &dbidev->dbi;
int ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
drm_dbg(pipe->crtc.dev, "\n");
ret = mipi_dbi_poweron_conditional_reset(dbidev);
if (ret < 0)
goto out_exit;
if (!ret)
panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private);
mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs panel_mipi_dbi_pipe_funcs = {
.enable = panel_mipi_dbi_enable,
.disable = mipi_dbi_pipe_disable,
.update = mipi_dbi_pipe_update,
};
DEFINE_DRM_GEM_DMA_FOPS(panel_mipi_dbi_fops);
static const struct drm_driver panel_mipi_dbi_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
.fops = &panel_mipi_dbi_fops,
DRM_GEM_DMA_DRIVER_OPS_VMAP,
.debugfs_init = mipi_dbi_debugfs_init,
.name = "panel-mipi-dbi",
.desc = "MIPI DBI compatible display panel",
.date = "20220103",
.major = 1,
.minor = 0,
};
static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode)
{
struct device *dev = dbidev->drm.dev;
u16 hback_porch, vback_porch;
int ret;
ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL);
if (ret) {
dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret);
return ret;
}
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
hback_porch = mode->htotal - mode->hsync_end;
vback_porch = mode->vtotal - mode->vsync_end;
/*
* Make sure width and height are set and that only back porch and
* pixelclock are set in the other timing values. Also check that
* width and height don't exceed the 16-bit value specified by MIPI DCS.
*/
if (!mode->hdisplay || !mode->vdisplay || mode->flags ||
mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff ||
mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) {
dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node);
return -EINVAL;
}
/* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */
if (!mode->clock)
mode->clock = mode->htotal * mode->vtotal * 60 / 1000;
dbidev->top_offset = vback_porch;
dbidev->left_offset = hback_porch;
return 0;
}
static int panel_mipi_dbi_spi_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct drm_display_mode mode;
struct mipi_dbi_dev *dbidev;
struct drm_device *drm;
struct mipi_dbi *dbi;
struct gpio_desc *dc;
int ret;
dbidev = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver, struct mipi_dbi_dev, drm);
if (IS_ERR(dbidev))
return PTR_ERR(dbidev);
dbi = &dbidev->dbi;
drm = &dbidev->drm;
ret = panel_mipi_dbi_get_mode(dbidev, &mode);
if (ret)
return ret;
dbidev->regulator = devm_regulator_get(dev, "power");
if (IS_ERR(dbidev->regulator))
return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
"Failed to get regulator 'power'\n");
dbidev->backlight = devm_of_find_backlight(dev);
if (IS_ERR(dbidev->backlight))
return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n");
dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(dbi->reset))
return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
if (IS_ERR(dc))
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
ret = mipi_dbi_spi_init(spi, dbi, dc);
if (ret)
return ret;
if (device_property_present(dev, "write-only"))
dbi->read_commands = NULL;
dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev);
if (IS_ERR(dbidev->driver_private))
return PTR_ERR(dbidev->driver_private);
ret = mipi_dbi_dev_init(dbidev, &panel_mipi_dbi_pipe_funcs, &mode, 0);
if (ret)
return ret;
drm_mode_config_reset(drm);
ret = drm_dev_register(drm, 0);
if (ret)
return ret;
spi_set_drvdata(spi, drm);
drm_fbdev_generic_setup(drm, 0);
return 0;
}
static void panel_mipi_dbi_spi_remove(struct spi_device *spi)
{
struct drm_device *drm = spi_get_drvdata(spi);
drm_dev_unplug(drm);
drm_atomic_helper_shutdown(drm);
}
static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi)
{
drm_atomic_helper_shutdown(spi_get_drvdata(spi));
}
static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev)
{
return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
}
static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev)
{
drm_mode_config_helper_resume(dev_get_drvdata(dev));
return 0;
}
static const struct dev_pm_ops panel_mipi_dbi_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume)
};
static const struct of_device_id panel_mipi_dbi_spi_of_match[] = {
{ .compatible = "panel-mipi-dbi-spi" },
{},
};
MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match);
static const struct spi_device_id panel_mipi_dbi_spi_id[] = {
{ "panel-mipi-dbi-spi", 0 },
{ },
};
MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id);
static struct spi_driver panel_mipi_dbi_spi_driver = {
.driver = {
.name = "panel-mipi-dbi-spi",
.owner = THIS_MODULE,
.of_match_table = panel_mipi_dbi_spi_of_match,
.pm = &panel_mipi_dbi_pm_ops,
},
.id_table = panel_mipi_dbi_spi_id,
.probe = panel_mipi_dbi_spi_probe,
.remove = panel_mipi_dbi_spi_remove,
.shutdown = panel_mipi_dbi_spi_shutdown,
};
module_spi_driver(panel_mipi_dbi_spi_driver);
MODULE_DESCRIPTION("MIPI DBI compatible display panel driver");
MODULE_AUTHOR("Noralf Trønnes");
MODULE_LICENSE("GPL");