e78fdfef84
This is to workaround the llock/scond livelock HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping coherency transactions in the SCU. The exclusive line state keeps rotating among contenting cores leading to a never ending cycle. So break the cycle by deferring the retry of failed exclusive access (SCOND). The actual delay needed is function of number of contending cores as well as the unrelated coherency traffic from other cores. To keep the code simple, start off with small delay of 1 which would suffice most cases and in case of contention double the delay. Eventually the delay is sufficient such that the coherency pipeline is drained, thus a subsequent exclusive access would succeed. Link: http://lkml.kernel.org/r/1438612568-28265-1-git-send-email-vgupta@synopsys.com Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
537 lines
12 KiB
Plaintext
537 lines
12 KiB
Plaintext
#
|
|
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License version 2 as
|
|
# published by the Free Software Foundation.
|
|
#
|
|
|
|
config ARC
|
|
def_bool y
|
|
select BUILDTIME_EXTABLE_SORT
|
|
select COMMON_CLK
|
|
select CLONE_BACKWARDS
|
|
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
|
|
select DEVTMPFS if !INITRAMFS_SOURCE=""
|
|
select GENERIC_ATOMIC64
|
|
select GENERIC_CLOCKEVENTS
|
|
select GENERIC_FIND_FIRST_BIT
|
|
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
|
|
select GENERIC_IRQ_SHOW
|
|
select GENERIC_PENDING_IRQ if SMP
|
|
select GENERIC_SMP_IDLE_THREAD
|
|
select HAVE_ARCH_KGDB
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_IOREMAP_PROT
|
|
select HAVE_KPROBES
|
|
select HAVE_KRETPROBES
|
|
select HAVE_MEMBLOCK
|
|
select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
|
|
select HAVE_OPROFILE
|
|
select HAVE_PERF_EVENTS
|
|
select IRQ_DOMAIN
|
|
select MODULES_USE_ELF_RELA
|
|
select NO_BOOTMEM
|
|
select OF
|
|
select OF_EARLY_FLATTREE
|
|
select PERF_USE_VMALLOC
|
|
select HAVE_DEBUG_STACKOVERFLOW
|
|
|
|
config TRACE_IRQFLAGS_SUPPORT
|
|
def_bool y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
def_bool y
|
|
|
|
config SCHED_OMIT_FRAME_POINTER
|
|
def_bool y
|
|
|
|
config GENERIC_CSUM
|
|
def_bool y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
def_bool y
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
def_bool y
|
|
|
|
config MMU
|
|
def_bool y
|
|
|
|
config NO_IOPORT_MAP
|
|
def_bool y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
def_bool y
|
|
|
|
config GENERIC_HWEIGHT
|
|
def_bool y
|
|
|
|
config STACKTRACE_SUPPORT
|
|
def_bool y
|
|
select STACKTRACE
|
|
|
|
config HAVE_LATENCYTOP_SUPPORT
|
|
def_bool y
|
|
|
|
source "init/Kconfig"
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "ARC Architecture Configuration"
|
|
|
|
menu "ARC Platform/SoC/Board"
|
|
|
|
source "arch/arc/plat-sim/Kconfig"
|
|
source "arch/arc/plat-tb10x/Kconfig"
|
|
source "arch/arc/plat-axs10x/Kconfig"
|
|
#New platform adds here
|
|
|
|
endmenu
|
|
|
|
choice
|
|
prompt "ARC Instruction Set"
|
|
default ISA_ARCOMPACT
|
|
|
|
config ISA_ARCOMPACT
|
|
bool "ARCompact ISA"
|
|
help
|
|
The original ARC ISA of ARC600/700 cores
|
|
|
|
config ISA_ARCV2
|
|
bool "ARC ISA v2"
|
|
help
|
|
ISA for the Next Generation ARC-HS cores
|
|
|
|
endchoice
|
|
|
|
menu "ARC CPU Configuration"
|
|
|
|
choice
|
|
prompt "ARC Core"
|
|
default ARC_CPU_770 if ISA_ARCOMPACT
|
|
default ARC_CPU_HS if ISA_ARCV2
|
|
|
|
if ISA_ARCOMPACT
|
|
|
|
config ARC_CPU_750D
|
|
bool "ARC750D"
|
|
select ARC_CANT_LLSC
|
|
help
|
|
Support for ARC750 core
|
|
|
|
config ARC_CPU_770
|
|
bool "ARC770"
|
|
select ARC_HAS_SWAPE
|
|
help
|
|
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
|
|
This core has a bunch of cool new features:
|
|
-MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
|
|
Shared Address Spaces (for sharing TLB entires in MMU)
|
|
-Caches: New Prog Model, Region Flush
|
|
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
|
|
|
|
endif #ISA_ARCOMPACT
|
|
|
|
config ARC_CPU_HS
|
|
bool "ARC-HS"
|
|
depends on ISA_ARCV2
|
|
help
|
|
Support for ARC HS38x Cores based on ARCv2 ISA
|
|
The notable features are:
|
|
- SMP configurations of upto 4 core with coherency
|
|
- Optional L2 Cache and IO-Coherency
|
|
- Revised Interrupt Architecture (multiple priorites, reg banks,
|
|
auto stack switch, auto regfile save/restore)
|
|
- MMUv4 (PIPT dcache, Huge Pages)
|
|
- Instructions for
|
|
* 64bit load/store: LDD, STD
|
|
* Hardware assisted divide/remainder: DIV, REM
|
|
* Function prologue/epilogue: ENTER_S, LEAVE_S
|
|
* IRQ enable/disable: CLRI, SETI
|
|
* pop count: FFS, FLS
|
|
* SETcc, BMSKN, XBFU...
|
|
|
|
endchoice
|
|
|
|
config CPU_BIG_ENDIAN
|
|
bool "Enable Big Endian Mode"
|
|
default n
|
|
help
|
|
Build kernel for Big Endian Mode of ARC CPU
|
|
|
|
config SMP
|
|
bool "Symmetric Multi-Processing"
|
|
default n
|
|
select ARC_HAS_COH_CACHES if ISA_ARCV2
|
|
select ARC_MCIP if ISA_ARCV2
|
|
help
|
|
This enables support for systems with more than one CPU.
|
|
|
|
if SMP
|
|
|
|
config ARC_HAS_COH_CACHES
|
|
def_bool n
|
|
|
|
config ARC_HAS_REENTRANT_IRQ_LV2
|
|
def_bool n
|
|
|
|
config ARC_MCIP
|
|
bool "ARConnect Multicore IP (MCIP) Support "
|
|
depends on ISA_ARCV2
|
|
help
|
|
This IP block enables SMP in ARC-HS38 cores.
|
|
It provides for cross-core interrupts, multi-core debug
|
|
hardware semaphores, shared memory,....
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-4096)"
|
|
range 2 4096
|
|
default "4"
|
|
|
|
endif #SMP
|
|
|
|
menuconfig ARC_CACHE
|
|
bool "Enable Cache Support"
|
|
default y
|
|
# if SMP, cache enabled ONLY if ARC implementation has cache coherency
|
|
depends on !SMP || ARC_HAS_COH_CACHES
|
|
|
|
if ARC_CACHE
|
|
|
|
config ARC_CACHE_LINE_SHIFT
|
|
int "Cache Line Length (as power of 2)"
|
|
range 5 7
|
|
default "6"
|
|
help
|
|
Starting with ARC700 4.9, Cache line length is configurable,
|
|
This option specifies "N", with Line-len = 2 power N
|
|
So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
|
|
Linux only supports same line lengths for I and D caches.
|
|
|
|
config ARC_HAS_ICACHE
|
|
bool "Use Instruction Cache"
|
|
default y
|
|
|
|
config ARC_HAS_DCACHE
|
|
bool "Use Data Cache"
|
|
default y
|
|
|
|
config ARC_CACHE_PAGES
|
|
bool "Per Page Cache Control"
|
|
default y
|
|
depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
|
|
help
|
|
This can be used to over-ride the global I/D Cache Enable on a
|
|
per-page basis (but only for pages accessed via MMU such as
|
|
Kernel Virtual address or User Virtual Address)
|
|
TLB entries have a per-page Cache Enable Bit.
|
|
Note that Global I/D ENABLE + Per Page DISABLE works but corollary
|
|
Global DISABLE + Per Page ENABLE won't work
|
|
|
|
config ARC_CACHE_VIPT_ALIASING
|
|
bool "Support VIPT Aliasing D$"
|
|
depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
|
|
default n
|
|
|
|
endif #ARC_CACHE
|
|
|
|
config ARC_HAS_ICCM
|
|
bool "Use ICCM"
|
|
help
|
|
Single Cycle RAMS to store Fast Path Code
|
|
default n
|
|
|
|
config ARC_ICCM_SZ
|
|
int "ICCM Size in KB"
|
|
default "64"
|
|
depends on ARC_HAS_ICCM
|
|
|
|
config ARC_HAS_DCCM
|
|
bool "Use DCCM"
|
|
help
|
|
Single Cycle RAMS to store Fast Path Data
|
|
default n
|
|
|
|
config ARC_DCCM_SZ
|
|
int "DCCM Size in KB"
|
|
default "64"
|
|
depends on ARC_HAS_DCCM
|
|
|
|
config ARC_DCCM_BASE
|
|
hex "DCCM map address"
|
|
default "0xA0000000"
|
|
depends on ARC_HAS_DCCM
|
|
|
|
config ARC_HAS_HW_MPY
|
|
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
|
|
default y
|
|
help
|
|
Influences how gcc generates code for MPY operations.
|
|
If enabled, MPYxx insns are generated, provided by Standard/XMAC
|
|
Multipler. Otherwise software multipy lib is used
|
|
|
|
choice
|
|
prompt "MMU Version"
|
|
default ARC_MMU_V3 if ARC_CPU_770
|
|
default ARC_MMU_V2 if ARC_CPU_750D
|
|
default ARC_MMU_V4 if ARC_CPU_HS
|
|
|
|
config ARC_MMU_V1
|
|
bool "MMU v1"
|
|
help
|
|
Orig ARC700 MMU
|
|
|
|
config ARC_MMU_V2
|
|
bool "MMU v2"
|
|
help
|
|
Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
|
|
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
|
|
|
|
config ARC_MMU_V3
|
|
bool "MMU v3"
|
|
depends on ARC_CPU_770
|
|
help
|
|
Introduced with ARC700 4.10: New Features
|
|
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
|
|
Shared Address Spaces (SASID)
|
|
|
|
config ARC_MMU_V4
|
|
bool "MMU v4"
|
|
depends on ISA_ARCV2
|
|
|
|
endchoice
|
|
|
|
|
|
choice
|
|
prompt "MMU Page Size"
|
|
default ARC_PAGE_SIZE_8K
|
|
|
|
config ARC_PAGE_SIZE_8K
|
|
bool "8KB"
|
|
help
|
|
Choose between 8k vs 16k
|
|
|
|
config ARC_PAGE_SIZE_16K
|
|
bool "16KB"
|
|
depends on ARC_MMU_V3 || ARC_MMU_V4
|
|
|
|
config ARC_PAGE_SIZE_4K
|
|
bool "4KB"
|
|
depends on ARC_MMU_V3 || ARC_MMU_V4
|
|
|
|
endchoice
|
|
|
|
if ISA_ARCOMPACT
|
|
|
|
config ARC_COMPACT_IRQ_LEVELS
|
|
bool "ARCompact IRQ Priorities: High(2)/Low(1)"
|
|
default n
|
|
# Timer HAS to be high priority, for any other high priority config
|
|
select ARC_IRQ3_LV2
|
|
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
|
|
depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
|
|
|
|
if ARC_COMPACT_IRQ_LEVELS
|
|
|
|
config ARC_IRQ3_LV2
|
|
bool
|
|
|
|
config ARC_IRQ5_LV2
|
|
bool
|
|
|
|
config ARC_IRQ6_LV2
|
|
bool
|
|
|
|
endif #ARC_COMPACT_IRQ_LEVELS
|
|
|
|
config ARC_FPU_SAVE_RESTORE
|
|
bool "Enable FPU state persistence across context switch"
|
|
default n
|
|
help
|
|
Double Precision Floating Point unit had dedictaed regs which
|
|
need to be saved/restored across context-switch.
|
|
Note that ARC FPU is overly simplistic, unlike say x86, which has
|
|
hardware pieces to allow software to conditionally save/restore,
|
|
based on actual usage of FPU by a task. Thus our implemn does
|
|
this for all tasks in system.
|
|
|
|
endif #ISA_ARCOMPACT
|
|
|
|
config ARC_CANT_LLSC
|
|
def_bool n
|
|
|
|
config ARC_HAS_LLSC
|
|
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
|
|
default y
|
|
depends on !ARC_CANT_LLSC
|
|
|
|
config ARC_STAR_9000923308
|
|
bool "Workaround for llock/scond livelock"
|
|
default y
|
|
depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
|
|
|
|
config ARC_HAS_SWAPE
|
|
bool "Insn: SWAPE (endian-swap)"
|
|
default y
|
|
|
|
if ISA_ARCV2
|
|
|
|
config ARC_HAS_LL64
|
|
bool "Insn: 64bit LDD/STD"
|
|
help
|
|
Enable gcc to generate 64-bit load/store instructions
|
|
ISA mandates even/odd registers to allow encoding of two
|
|
dest operands with 2 possible source operands.
|
|
default y
|
|
|
|
config ARC_HAS_DIV_REM
|
|
bool "Insn: div, divu, rem, remu"
|
|
default y
|
|
|
|
config ARC_HAS_RTC
|
|
bool "Local 64-bit r/o cycle counter"
|
|
default n
|
|
depends on !SMP
|
|
|
|
config ARC_HAS_GRTC
|
|
bool "SMP synchronized 64-bit cycle counter"
|
|
default y
|
|
depends on SMP
|
|
|
|
config ARC_NUMBER_OF_INTERRUPTS
|
|
int "Number of interrupts"
|
|
range 8 240
|
|
default 32
|
|
help
|
|
This defines the number of interrupts on the ARCv2HS core.
|
|
It affects the size of vector table.
|
|
The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
|
|
in hardware, it keep things simple for Linux to assume they are always
|
|
present.
|
|
|
|
endif # ISA_ARCV2
|
|
|
|
endmenu # "ARC CPU Configuration"
|
|
|
|
config LINUX_LINK_BASE
|
|
hex "Linux Link Address"
|
|
default "0x80000000"
|
|
help
|
|
ARC700 divides the 32 bit phy address space into two equal halves
|
|
-Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
|
|
-Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
|
|
Typically Linux kernel is linked at the start of untransalted addr,
|
|
hence the default value of 0x8zs.
|
|
However some customers have peripherals mapped at this addr, so
|
|
Linux needs to be scooted a bit.
|
|
If you don't know what the above means, leave this setting alone.
|
|
|
|
config ARC_CURR_IN_REG
|
|
bool "Dedicate Register r25 for current_task pointer"
|
|
default y
|
|
help
|
|
This reserved Register R25 to point to Current Task in
|
|
kernel mode. This saves memory access for each such access
|
|
|
|
|
|
config ARC_EMUL_UNALIGNED
|
|
bool "Emulate unaligned memory access (userspace only)"
|
|
default N
|
|
select SYSCTL_ARCH_UNALIGN_NO_WARN
|
|
select SYSCTL_ARCH_UNALIGN_ALLOW
|
|
depends on ISA_ARCOMPACT
|
|
help
|
|
This enables misaligned 16 & 32 bit memory access from user space.
|
|
Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
|
|
potential bugs in code
|
|
|
|
config HZ
|
|
int "Timer Frequency"
|
|
default 100
|
|
|
|
config ARC_METAWARE_HLINK
|
|
bool "Support for Metaware debugger assisted Host access"
|
|
default n
|
|
help
|
|
This options allows a Linux userland apps to directly access
|
|
host file system (open/creat/read/write etc) with help from
|
|
Metaware Debugger. This can come in handy for Linux-host communication
|
|
when there is no real usable peripheral such as EMAC.
|
|
|
|
menuconfig ARC_DBG
|
|
bool "ARC debugging"
|
|
default y
|
|
|
|
if ARC_DBG
|
|
|
|
config ARC_DW2_UNWIND
|
|
bool "Enable DWARF specific kernel stack unwind"
|
|
default y
|
|
select KALLSYMS
|
|
help
|
|
Compiles the kernel with DWARF unwind information and can be used
|
|
to get stack backtraces.
|
|
|
|
If you say Y here the resulting kernel image will be slightly larger
|
|
but not slower, and it will give very useful debugging information.
|
|
If you don't debug the kernel, you can say N, but we may not be able
|
|
to solve problems without frame unwind information
|
|
|
|
config ARC_DBG_TLB_PARANOIA
|
|
bool "Paranoia Checks in Low Level TLB Handlers"
|
|
default n
|
|
|
|
config ARC_DBG_TLB_MISS_COUNT
|
|
bool "Profile TLB Misses"
|
|
default n
|
|
select DEBUG_FS
|
|
help
|
|
Counts number of I and D TLB Misses and exports them via Debugfs
|
|
The counters can be cleared via Debugfs as well
|
|
|
|
if SMP
|
|
|
|
config ARC_IPI_DBG
|
|
bool "Debug Inter Core interrupts"
|
|
default n
|
|
|
|
endif
|
|
|
|
endif
|
|
|
|
config ARC_UBOOT_SUPPORT
|
|
bool "Support uboot arg Handling"
|
|
default n
|
|
help
|
|
ARC Linux by default checks for uboot provided args as pointers to
|
|
external cmdline or DTB. This however breaks in absence of uboot,
|
|
when booting from Metaware debugger directly, as the registers are
|
|
not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
|
|
registers look like uboot args to kernel which then chokes.
|
|
So only enable the uboot arg checking/processing if users are sure
|
|
of uboot being in play.
|
|
|
|
config ARC_BUILTIN_DTB_NAME
|
|
string "Built in DTB"
|
|
help
|
|
Set the name of the DTB to embed in the vmlinux binary
|
|
Leaving it blank selects the minimal "skeleton" dtb
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
menu "Executable file formats"
|
|
source "fs/Kconfig.binfmt"
|
|
endmenu
|
|
|
|
endmenu # "ARC Architecture Configuration"
|
|
|
|
source "mm/Kconfig"
|
|
source "net/Kconfig"
|
|
source "drivers/Kconfig"
|
|
source "fs/Kconfig"
|
|
source "arch/arc/Kconfig.debug"
|
|
source "security/Kconfig"
|
|
source "crypto/Kconfig"
|
|
source "lib/Kconfig"
|
|
source "kernel/power/Kconfig"
|