linux/drivers/video/omap2/dss/hdmi_phy.c
Tomi Valkeinen 77601507bc OMAPDSS: HDMI: rename resource names
The HDMI driver tries to get the needed memory resources by name and by
ID. Resources by name are not currently defined, and will be used with
DT boot.

The resource names used in the driver are not quite perfect, and as they
are not used yet, we can change them. This patch removes the unneeded
"hdmi_" prefix from the names, and simplifies the names (e.g. hdmi_txphy
-> phy).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:54 +02:00

161 lines
4.1 KiB
C

/*
* HDMI PHY
*
* Copyright (C) 2013 Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <video/omapdss.h>
#include "dss.h"
#include "hdmi.h"
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
{
#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
hdmi_read_reg(phy->base, r))
DUMPPHY(HDMI_TXPHY_TX_CTRL);
DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
DUMPPHY(HDMI_TXPHY_POWER_CTRL);
DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
}
static irqreturn_t hdmi_irq_handler(int irq, void *data)
{
struct hdmi_wp_data *wp = data;
u32 irqstatus;
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
/*
* If we get both connect and disconnect interrupts at the same
* time, turn off the PHY, clear interrupts, and restart, which
* raises connect interrupt if a cable is connected, or nothing
* if cable is not connected.
*/
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
HDMI_IRQ_LINK_DISCONNECT);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
}
return IRQ_HANDLED;
}
int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
struct hdmi_config *cfg)
{
u16 r = 0;
u32 irqstatus;
hdmi_wp_clear_irqenable(wp, 0xffffffff);
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
return r;
/*
* Read address 0 in order to get the SCP reset done completed
* Dummy access performed to make sure reset is done
*/
hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
/*
* Write to phy address 0 to configure the clock
* use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
*/
REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
/* Setup max LDO voltage */
REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
/* Write to phy address 3 to change the polarity control */
REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
IRQF_ONESHOT, "OMAP HDMI", wp);
if (r) {
DSSERR("HDMI IRQ request failed\n");
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
return r;
}
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
}
void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp)
{
free_irq(phy->irq, wp);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
}
#define PHY_OFFSET 0x300
#define PHY_SIZE 0x100
int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
{
struct resource *res;
struct resource temp_res;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
if (!res) {
DSSDBG("can't get PHY mem resource by name\n");
/*
* if hwmod/DT doesn't have the memory resource information
* split into HDMI sub blocks by name, we try again by getting
* the platform's first resource. this code will be removed when
* the driver can get the mem resources by name
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
DSSERR("can't get PHY mem resource\n");
return -EINVAL;
}
temp_res.start = res->start + PHY_OFFSET;
temp_res.end = temp_res.start + PHY_SIZE - 1;
res = &temp_res;
}
phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!phy->base) {
DSSERR("can't ioremap TX PHY\n");
return -ENOMEM;
}
phy->irq = platform_get_irq(pdev, 0);
if (phy->irq < 0) {
DSSERR("platform_get_irq failed\n");
return -ENODEV;
}
return 0;
}