e637713989
This prepares the pwm-lp3943 driver to further changes of the pwm core outlined in the commit introducing devm_pwmchip_alloc(). There is no intended semantical change and the driver should behave as before. Link: https://lore.kernel.org/r/44a2d303bb511e49c6db8aaedd17986c3aedde44.1707900770.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
322 lines
7.6 KiB
C
322 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI/National Semiconductor LP3943 PWM driver
|
|
*
|
|
* Copyright 2013 Texas Instruments
|
|
*
|
|
* Author: Milo Kim <milo.kim@ti.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/mfd/lp3943.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define LP3943_MAX_DUTY 255
|
|
#define LP3943_MIN_PERIOD 6250
|
|
#define LP3943_MAX_PERIOD 1600000
|
|
|
|
struct lp3943_pwm {
|
|
struct lp3943 *lp3943;
|
|
struct lp3943_platform_data *pdata;
|
|
struct lp3943_pwm_map pwm_map[LP3943_NUM_PWMS];
|
|
};
|
|
|
|
static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *chip)
|
|
{
|
|
return pwmchip_get_drvdata(chip);
|
|
}
|
|
|
|
static struct lp3943_pwm_map *
|
|
lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
|
|
{
|
|
struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
struct lp3943_pwm_map *pwm_map = &lp3943_pwm->pwm_map[hwpwm];
|
|
int i, offset;
|
|
|
|
pwm_map->output = pdata->pwms[hwpwm]->output;
|
|
pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
offset = pwm_map->output[i];
|
|
|
|
/* Return an error if the pin is already assigned */
|
|
if (test_and_set_bit(offset, &lp3943->pin_used))
|
|
return ERR_PTR(-EBUSY);
|
|
}
|
|
|
|
return pwm_map;
|
|
}
|
|
|
|
static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map;
|
|
|
|
pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
|
|
if (IS_ERR(pwm_map))
|
|
return PTR_ERR(pwm_map);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
|
|
struct lp3943_pwm_map *pwm_map)
|
|
{
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
int i, offset;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
offset = pwm_map->output[i];
|
|
clear_bit(offset, &lp3943->pin_used);
|
|
}
|
|
}
|
|
|
|
static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = &lp3943_pwm->pwm_map[pwm->hwpwm];
|
|
|
|
lp3943_pwm_free_map(lp3943_pwm, pwm_map);
|
|
}
|
|
|
|
static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
u64 duty_ns, u64 period_ns)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
u8 val, reg_duty, reg_prescale;
|
|
int err;
|
|
|
|
/*
|
|
* How to configure the LP3943 PWMs
|
|
*
|
|
* 1) Period = 6250 ~ 1600000
|
|
* 2) Prescale = period / 6250 -1
|
|
* 3) Duty = input duty
|
|
*
|
|
* Prescale and duty are register values
|
|
*/
|
|
|
|
if (pwm->hwpwm == 0) {
|
|
reg_prescale = LP3943_REG_PRESCALE0;
|
|
reg_duty = LP3943_REG_PWM0;
|
|
} else {
|
|
reg_prescale = LP3943_REG_PRESCALE1;
|
|
reg_duty = LP3943_REG_PWM1;
|
|
}
|
|
|
|
/*
|
|
* Note that after this clamping, period_ns fits into an int. This is
|
|
* helpful because we can resort to integer division below instead of
|
|
* the (more expensive) 64 bit division.
|
|
*/
|
|
period_ns = clamp(period_ns, (u64)LP3943_MIN_PERIOD, (u64)LP3943_MAX_PERIOD);
|
|
val = (u8)((int)period_ns / LP3943_MIN_PERIOD - 1);
|
|
|
|
err = lp3943_write_byte(lp3943, reg_prescale, val);
|
|
if (err)
|
|
return err;
|
|
|
|
duty_ns = min(duty_ns, period_ns);
|
|
val = (u8)((int)duty_ns * LP3943_MAX_DUTY / (int)period_ns);
|
|
|
|
return lp3943_write_byte(lp3943, reg_duty, val);
|
|
}
|
|
|
|
static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
|
|
struct lp3943_pwm_map *pwm_map,
|
|
u8 val)
|
|
{
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
|
|
int i, index, err;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
index = pwm_map->output[i];
|
|
err = lp3943_update_bits(lp3943, mux[index].reg,
|
|
mux[index].mask,
|
|
val << mux[index].shift);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = &lp3943_pwm->pwm_map[pwm->hwpwm];
|
|
u8 val;
|
|
|
|
if (pwm->hwpwm == 0)
|
|
val = LP3943_DIM_PWM0;
|
|
else
|
|
val = LP3943_DIM_PWM1;
|
|
|
|
/*
|
|
* Each PWM generator is set to control any of outputs of LP3943.
|
|
* To enable/disable the PWM, these output pins should be configured.
|
|
*/
|
|
|
|
return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
|
|
}
|
|
|
|
static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = &lp3943_pwm->pwm_map[pwm->hwpwm];
|
|
|
|
/*
|
|
* LP3943 outputs are open-drain, so the pin should be configured
|
|
* when the PWM is disabled.
|
|
*/
|
|
|
|
lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
|
|
}
|
|
|
|
static int lp3943_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int err;
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled) {
|
|
if (pwm->state.enabled)
|
|
lp3943_pwm_disable(chip, pwm);
|
|
return 0;
|
|
}
|
|
|
|
err = lp3943_pwm_config(chip, pwm, state->duty_cycle, state->period);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pwm->state.enabled)
|
|
err = lp3943_pwm_enable(chip, pwm);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct pwm_ops lp3943_pwm_ops = {
|
|
.request = lp3943_pwm_request,
|
|
.free = lp3943_pwm_free,
|
|
.apply = lp3943_pwm_apply,
|
|
};
|
|
|
|
static int lp3943_pwm_parse_dt(struct device *dev,
|
|
struct lp3943_pwm *lp3943_pwm)
|
|
{
|
|
static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
|
|
struct device_node *node = dev->of_node;
|
|
struct lp3943_platform_data *pdata;
|
|
struct lp3943_pwm_map *pwm_map;
|
|
enum lp3943_pwm_output *output;
|
|
int i, err, proplen, count = 0;
|
|
u32 num_outputs;
|
|
|
|
if (!node)
|
|
return -EINVAL;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Read the output map configuration from the device tree.
|
|
* Each of the two PWM generators can drive zero or more outputs.
|
|
*/
|
|
|
|
for (i = 0; i < LP3943_NUM_PWMS; i++) {
|
|
if (!of_get_property(node, name[i], &proplen))
|
|
continue;
|
|
|
|
num_outputs = proplen / sizeof(u32);
|
|
if (num_outputs == 0)
|
|
continue;
|
|
|
|
output = devm_kcalloc(dev, num_outputs, sizeof(*output),
|
|
GFP_KERNEL);
|
|
if (!output)
|
|
return -ENOMEM;
|
|
|
|
err = of_property_read_u32_array(node, name[i], output,
|
|
num_outputs);
|
|
if (err)
|
|
return err;
|
|
|
|
pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
|
|
if (!pwm_map)
|
|
return -ENOMEM;
|
|
|
|
pwm_map->output = output;
|
|
pwm_map->num_outputs = num_outputs;
|
|
pdata->pwms[i] = pwm_map;
|
|
|
|
count++;
|
|
}
|
|
|
|
if (count == 0)
|
|
return -ENODATA;
|
|
|
|
lp3943_pwm->pdata = pdata;
|
|
return 0;
|
|
}
|
|
|
|
static int lp3943_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
|
|
struct pwm_chip *chip;
|
|
struct lp3943_pwm *lp3943_pwm;
|
|
int ret;
|
|
|
|
chip = devm_pwmchip_alloc(&pdev->dev, LP3943_NUM_PWMS, sizeof(*lp3943_pwm));
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
lp3943_pwm = to_lp3943_pwm(chip);
|
|
|
|
lp3943_pwm->pdata = lp3943->pdata;
|
|
if (!lp3943_pwm->pdata) {
|
|
if (IS_ENABLED(CONFIG_OF))
|
|
ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
|
|
else
|
|
ret = -ENODEV;
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
lp3943_pwm->lp3943 = lp3943;
|
|
chip->ops = &lp3943_pwm_ops;
|
|
|
|
return devm_pwmchip_add(&pdev->dev, chip);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id lp3943_pwm_of_match[] = {
|
|
{ .compatible = "ti,lp3943-pwm", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver lp3943_pwm_driver = {
|
|
.probe = lp3943_pwm_probe,
|
|
.driver = {
|
|
.name = "lp3943-pwm",
|
|
.of_match_table = of_match_ptr(lp3943_pwm_of_match),
|
|
},
|
|
};
|
|
module_platform_driver(lp3943_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("LP3943 PWM driver");
|
|
MODULE_ALIAS("platform:lp3943-pwm");
|
|
MODULE_AUTHOR("Milo Kim");
|
|
MODULE_LICENSE("GPL");
|