linux/drivers/clk/qcom/lpasscc-sc7280.c
Johan Hovold 66af5339d4 clk: qcom: lpasscc-sc7280: fix missing resume during probe
Drivers that enable runtime PM must make sure that the controller is
runtime resumed before accessing its registers to prevent the power
domain from being disabled.

Fixes: 4ab43d1711 ("clk: qcom: Add lpass clock controller driver for SC7280")
Cc: stable@vger.kernel.org      # 5.16
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230718132902.21430-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-18 07:58:50 -07:00

186 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
*/
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/pm_clock.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,lpass-sc7280.h>
#include "clk-regmap.h"
#include "clk-branch.h"
#include "common.h"
static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = {
.halt_reg = 0x0,
.halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x0,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lpass_top_cc_lpi_q6_axim_hs_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lpass_qdsp6ss_core_clk = {
.halt_reg = 0x20,
/* CLK_OFF would not toggle until LPASS is out of reset */
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x20,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lpass_qdsp6ss_core_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lpass_qdsp6ss_xo_clk = {
.halt_reg = 0x38,
/* CLK_OFF would not toggle until LPASS is out of reset */
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x38,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lpass_qdsp6ss_xo_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lpass_qdsp6ss_sleep_clk = {
.halt_reg = 0x3c,
/* CLK_OFF would not toggle until LPASS is out of reset */
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x3c,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lpass_qdsp6ss_sleep_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct regmap_config lpass_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.fast_io = true,
};
static struct clk_regmap *lpass_cc_top_sc7280_clocks[] = {
[LPASS_TOP_CC_LPI_Q6_AXIM_HS_CLK] =
&lpass_top_cc_lpi_q6_axim_hs_clk.clkr,
};
static const struct qcom_cc_desc lpass_cc_top_sc7280_desc = {
.config = &lpass_regmap_config,
.clks = lpass_cc_top_sc7280_clocks,
.num_clks = ARRAY_SIZE(lpass_cc_top_sc7280_clocks),
};
static struct clk_regmap *lpass_qdsp6ss_sc7280_clocks[] = {
[LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr,
[LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr,
[LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr,
};
static const struct qcom_cc_desc lpass_qdsp6ss_sc7280_desc = {
.config = &lpass_regmap_config,
.clks = lpass_qdsp6ss_sc7280_clocks,
.num_clks = ARRAY_SIZE(lpass_qdsp6ss_sc7280_clocks),
};
static int lpass_cc_sc7280_probe(struct platform_device *pdev)
{
const struct qcom_cc_desc *desc;
int ret;
ret = devm_pm_runtime_enable(&pdev->dev);
if (ret)
return ret;
ret = pm_clk_create(&pdev->dev);
if (ret)
return ret;
ret = pm_clk_add(&pdev->dev, "iface");
if (ret < 0) {
dev_err(&pdev->dev, "failed to acquire iface clock\n");
goto err_destroy_pm_clk;
}
ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret)
goto err_destroy_pm_clk;
if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
lpass_regmap_config.name = "qdsp6ss";
lpass_regmap_config.max_register = 0x3f;
desc = &lpass_qdsp6ss_sc7280_desc;
ret = qcom_cc_probe_by_index(pdev, 0, desc);
if (ret)
goto err_put_rpm;
}
lpass_regmap_config.name = "top_cc";
lpass_regmap_config.max_register = 0x4;
desc = &lpass_cc_top_sc7280_desc;
ret = qcom_cc_probe_by_index(pdev, 1, desc);
if (ret)
goto err_put_rpm;
pm_runtime_put(&pdev->dev);
return 0;
err_put_rpm:
pm_runtime_put_sync(&pdev->dev);
err_destroy_pm_clk:
pm_clk_destroy(&pdev->dev);
return ret;
}
static const struct of_device_id lpass_cc_sc7280_match_table[] = {
{ .compatible = "qcom,sc7280-lpasscc" },
{ }
};
MODULE_DEVICE_TABLE(of, lpass_cc_sc7280_match_table);
static struct platform_driver lpass_cc_sc7280_driver = {
.probe = lpass_cc_sc7280_probe,
.driver = {
.name = "sc7280-lpasscc",
.of_match_table = lpass_cc_sc7280_match_table,
},
};
static int __init lpass_cc_sc7280_init(void)
{
return platform_driver_register(&lpass_cc_sc7280_driver);
}
subsys_initcall(lpass_cc_sc7280_init);
static void __exit lpass_cc_sc7280_exit(void)
{
platform_driver_unregister(&lpass_cc_sc7280_driver);
}
module_exit(lpass_cc_sc7280_exit);
MODULE_DESCRIPTION("QTI LPASS_CC SC7280 Driver");
MODULE_LICENSE("GPL v2");