ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
972 lines
23 KiB
C
972 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* video-i2c.c - Support for I2C transport video devices
|
|
*
|
|
* Copyright (C) 2018 Matt Ranostay <matt.ranostay@konsulko.com>
|
|
*
|
|
* Supported:
|
|
* - Panasonic AMG88xx Grid-Eye Sensors
|
|
* - Melexis MLX90640 Thermal Cameras
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-fh.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/videobuf2-v4l2.h>
|
|
#include <media/videobuf2-vmalloc.h>
|
|
|
|
#define VIDEO_I2C_DRIVER "video-i2c"
|
|
|
|
/* Power control register */
|
|
#define AMG88XX_REG_PCTL 0x00
|
|
#define AMG88XX_PCTL_NORMAL 0x00
|
|
#define AMG88XX_PCTL_SLEEP 0x10
|
|
|
|
/* Reset register */
|
|
#define AMG88XX_REG_RST 0x01
|
|
#define AMG88XX_RST_FLAG 0x30
|
|
#define AMG88XX_RST_INIT 0x3f
|
|
|
|
/* Frame rate register */
|
|
#define AMG88XX_REG_FPSC 0x02
|
|
#define AMG88XX_FPSC_1FPS BIT(0)
|
|
|
|
/* Thermistor register */
|
|
#define AMG88XX_REG_TTHL 0x0e
|
|
|
|
/* Temperature register */
|
|
#define AMG88XX_REG_T01L 0x80
|
|
|
|
/* RAM */
|
|
#define MLX90640_RAM_START_ADDR 0x0400
|
|
|
|
/* EEPROM */
|
|
#define MLX90640_EEPROM_START_ADDR 0x2400
|
|
|
|
/* Control register */
|
|
#define MLX90640_REG_CTL1 0x800d
|
|
#define MLX90640_REG_CTL1_MASK GENMASK(9, 7)
|
|
#define MLX90640_REG_CTL1_MASK_SHIFT 7
|
|
|
|
struct video_i2c_chip;
|
|
|
|
struct video_i2c_buffer {
|
|
struct vb2_v4l2_buffer vb;
|
|
struct list_head list;
|
|
};
|
|
|
|
struct video_i2c_data {
|
|
struct regmap *regmap;
|
|
const struct video_i2c_chip *chip;
|
|
struct mutex lock;
|
|
spinlock_t slock;
|
|
unsigned int sequence;
|
|
struct mutex queue_lock;
|
|
|
|
struct v4l2_device v4l2_dev;
|
|
struct video_device vdev;
|
|
struct vb2_queue vb_vidq;
|
|
|
|
struct task_struct *kthread_vid_cap;
|
|
struct list_head vid_cap_active;
|
|
|
|
struct v4l2_fract frame_interval;
|
|
};
|
|
|
|
static const struct v4l2_fmtdesc amg88xx_format = {
|
|
.pixelformat = V4L2_PIX_FMT_Y12,
|
|
};
|
|
|
|
static const struct v4l2_frmsize_discrete amg88xx_size = {
|
|
.width = 8,
|
|
.height = 8,
|
|
};
|
|
|
|
static const struct v4l2_fmtdesc mlx90640_format = {
|
|
.pixelformat = V4L2_PIX_FMT_Y16_BE,
|
|
};
|
|
|
|
static const struct v4l2_frmsize_discrete mlx90640_size = {
|
|
.width = 32,
|
|
.height = 26, /* 24 lines of pixel data + 2 lines of processing data */
|
|
};
|
|
|
|
static const struct regmap_config amg88xx_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff
|
|
};
|
|
|
|
static const struct regmap_config mlx90640_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
};
|
|
|
|
struct video_i2c_chip {
|
|
/* video dimensions */
|
|
const struct v4l2_fmtdesc *format;
|
|
const struct v4l2_frmsize_discrete *size;
|
|
|
|
/* available frame intervals */
|
|
const struct v4l2_fract *frame_intervals;
|
|
unsigned int num_frame_intervals;
|
|
|
|
/* pixel buffer size */
|
|
unsigned int buffer_size;
|
|
|
|
/* pixel size in bits */
|
|
unsigned int bpp;
|
|
|
|
const struct regmap_config *regmap_config;
|
|
struct nvmem_config *nvmem_config;
|
|
|
|
/* setup function */
|
|
int (*setup)(struct video_i2c_data *data);
|
|
|
|
/* xfer function */
|
|
int (*xfer)(struct video_i2c_data *data, char *buf);
|
|
|
|
/* power control function */
|
|
int (*set_power)(struct video_i2c_data *data, bool on);
|
|
|
|
/* hwmon init function */
|
|
int (*hwmon_init)(struct video_i2c_data *data);
|
|
};
|
|
|
|
static int mlx90640_nvram_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
struct video_i2c_data *data = priv;
|
|
|
|
return regmap_bulk_read(data->regmap, MLX90640_EEPROM_START_ADDR + offset, val, bytes);
|
|
}
|
|
|
|
static struct nvmem_config mlx90640_nvram_config = {
|
|
.name = "mlx90640_nvram",
|
|
.word_size = 2,
|
|
.stride = 1,
|
|
.size = 1664,
|
|
.reg_read = mlx90640_nvram_read,
|
|
};
|
|
|
|
static int amg88xx_xfer(struct video_i2c_data *data, char *buf)
|
|
{
|
|
return regmap_bulk_read(data->regmap, AMG88XX_REG_T01L, buf,
|
|
data->chip->buffer_size);
|
|
}
|
|
|
|
static int mlx90640_xfer(struct video_i2c_data *data, char *buf)
|
|
{
|
|
return regmap_bulk_read(data->regmap, MLX90640_RAM_START_ADDR, buf,
|
|
data->chip->buffer_size);
|
|
}
|
|
|
|
static int amg88xx_setup(struct video_i2c_data *data)
|
|
{
|
|
unsigned int mask = AMG88XX_FPSC_1FPS;
|
|
unsigned int val;
|
|
|
|
if (data->frame_interval.numerator == data->frame_interval.denominator)
|
|
val = mask;
|
|
else
|
|
val = 0;
|
|
|
|
return regmap_update_bits(data->regmap, AMG88XX_REG_FPSC, mask, val);
|
|
}
|
|
|
|
static int mlx90640_setup(struct video_i2c_data *data)
|
|
{
|
|
unsigned int n, idx;
|
|
|
|
for (n = 0; n < data->chip->num_frame_intervals - 1; n++) {
|
|
if (V4L2_FRACT_COMPARE(data->frame_interval, ==,
|
|
data->chip->frame_intervals[n]))
|
|
break;
|
|
}
|
|
|
|
idx = data->chip->num_frame_intervals - n - 1;
|
|
|
|
return regmap_update_bits(data->regmap, MLX90640_REG_CTL1,
|
|
MLX90640_REG_CTL1_MASK,
|
|
idx << MLX90640_REG_CTL1_MASK_SHIFT);
|
|
}
|
|
|
|
static int amg88xx_set_power_on(struct video_i2c_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(data->regmap, AMG88XX_REG_PCTL, AMG88XX_PCTL_NORMAL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(50);
|
|
|
|
ret = regmap_write(data->regmap, AMG88XX_REG_RST, AMG88XX_RST_INIT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
ret = regmap_write(data->regmap, AMG88XX_REG_RST, AMG88XX_RST_FLAG);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Wait two frames before reading thermistor and temperature registers
|
|
*/
|
|
msleep(200);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amg88xx_set_power_off(struct video_i2c_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(data->regmap, AMG88XX_REG_PCTL, AMG88XX_PCTL_SLEEP);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* Wait for a while to avoid resuming normal mode immediately after
|
|
* entering sleep mode, otherwise the device occasionally goes wrong
|
|
* (thermistor and temperature registers are not updated at all)
|
|
*/
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amg88xx_set_power(struct video_i2c_data *data, bool on)
|
|
{
|
|
if (on)
|
|
return amg88xx_set_power_on(data);
|
|
|
|
return amg88xx_set_power_off(data);
|
|
}
|
|
|
|
#if IS_REACHABLE(CONFIG_HWMON)
|
|
|
|
static const u32 amg88xx_temp_config[] = {
|
|
HWMON_T_INPUT,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info amg88xx_temp = {
|
|
.type = hwmon_temp,
|
|
.config = amg88xx_temp_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *amg88xx_info[] = {
|
|
&amg88xx_temp,
|
|
NULL
|
|
};
|
|
|
|
static umode_t amg88xx_is_visible(const void *drvdata,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
return 0444;
|
|
}
|
|
|
|
static int amg88xx_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct video_i2c_data *data = dev_get_drvdata(dev);
|
|
__le16 buf;
|
|
int tmp;
|
|
|
|
tmp = pm_runtime_resume_and_get(regmap_get_device(data->regmap));
|
|
if (tmp < 0)
|
|
return tmp;
|
|
|
|
tmp = regmap_bulk_read(data->regmap, AMG88XX_REG_TTHL, &buf, 2);
|
|
pm_runtime_mark_last_busy(regmap_get_device(data->regmap));
|
|
pm_runtime_put_autosuspend(regmap_get_device(data->regmap));
|
|
if (tmp)
|
|
return tmp;
|
|
|
|
tmp = le16_to_cpu(buf);
|
|
|
|
/*
|
|
* Check for sign bit, this isn't a two's complement value but an
|
|
* absolute temperature that needs to be inverted in the case of being
|
|
* negative.
|
|
*/
|
|
if (tmp & BIT(11))
|
|
tmp = -(tmp & 0x7ff);
|
|
|
|
*val = (tmp * 625) / 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_ops amg88xx_hwmon_ops = {
|
|
.is_visible = amg88xx_is_visible,
|
|
.read = amg88xx_read,
|
|
};
|
|
|
|
static const struct hwmon_chip_info amg88xx_chip_info = {
|
|
.ops = &amg88xx_hwmon_ops,
|
|
.info = amg88xx_info,
|
|
};
|
|
|
|
static int amg88xx_hwmon_init(struct video_i2c_data *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
void *hwmon = devm_hwmon_device_register_with_info(dev, "amg88xx", data,
|
|
&amg88xx_chip_info, NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(hwmon);
|
|
}
|
|
#else
|
|
#define amg88xx_hwmon_init NULL
|
|
#endif
|
|
|
|
enum {
|
|
AMG88XX,
|
|
MLX90640,
|
|
};
|
|
|
|
static const struct v4l2_fract amg88xx_frame_intervals[] = {
|
|
{ 1, 10 },
|
|
{ 1, 1 },
|
|
};
|
|
|
|
static const struct v4l2_fract mlx90640_frame_intervals[] = {
|
|
{ 1, 64 },
|
|
{ 1, 32 },
|
|
{ 1, 16 },
|
|
{ 1, 8 },
|
|
{ 1, 4 },
|
|
{ 1, 2 },
|
|
{ 1, 1 },
|
|
{ 2, 1 },
|
|
};
|
|
|
|
static const struct video_i2c_chip video_i2c_chip[] = {
|
|
[AMG88XX] = {
|
|
.size = &amg88xx_size,
|
|
.format = &amg88xx_format,
|
|
.frame_intervals = amg88xx_frame_intervals,
|
|
.num_frame_intervals = ARRAY_SIZE(amg88xx_frame_intervals),
|
|
.buffer_size = 128,
|
|
.bpp = 16,
|
|
.regmap_config = &amg88xx_regmap_config,
|
|
.setup = &amg88xx_setup,
|
|
.xfer = &amg88xx_xfer,
|
|
.set_power = amg88xx_set_power,
|
|
.hwmon_init = amg88xx_hwmon_init,
|
|
},
|
|
[MLX90640] = {
|
|
.size = &mlx90640_size,
|
|
.format = &mlx90640_format,
|
|
.frame_intervals = mlx90640_frame_intervals,
|
|
.num_frame_intervals = ARRAY_SIZE(mlx90640_frame_intervals),
|
|
.buffer_size = 1664,
|
|
.bpp = 16,
|
|
.regmap_config = &mlx90640_regmap_config,
|
|
.nvmem_config = &mlx90640_nvram_config,
|
|
.setup = mlx90640_setup,
|
|
.xfer = mlx90640_xfer,
|
|
},
|
|
};
|
|
|
|
static const struct v4l2_file_operations video_i2c_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = v4l2_fh_open,
|
|
.release = vb2_fop_release,
|
|
.poll = vb2_fop_poll,
|
|
.read = vb2_fop_read,
|
|
.mmap = vb2_fop_mmap,
|
|
.unlocked_ioctl = video_ioctl2,
|
|
};
|
|
|
|
static int queue_setup(struct vb2_queue *vq,
|
|
unsigned int *nbuffers, unsigned int *nplanes,
|
|
unsigned int sizes[], struct device *alloc_devs[])
|
|
{
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vq);
|
|
unsigned int size = data->chip->buffer_size;
|
|
|
|
if (vq->num_buffers + *nbuffers < 2)
|
|
*nbuffers = 2;
|
|
|
|
if (*nplanes)
|
|
return sizes[0] < size ? -EINVAL : 0;
|
|
|
|
*nplanes = 1;
|
|
sizes[0] = size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue);
|
|
unsigned int size = data->chip->buffer_size;
|
|
|
|
if (vb2_plane_size(vb, 0) < size)
|
|
return -EINVAL;
|
|
|
|
vbuf->field = V4L2_FIELD_NONE;
|
|
vb2_set_plane_payload(vb, 0, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void buffer_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct video_i2c_buffer *buf =
|
|
container_of(vbuf, struct video_i2c_buffer, vb);
|
|
|
|
spin_lock(&data->slock);
|
|
list_add_tail(&buf->list, &data->vid_cap_active);
|
|
spin_unlock(&data->slock);
|
|
}
|
|
|
|
static int video_i2c_thread_vid_cap(void *priv)
|
|
{
|
|
struct video_i2c_data *data = priv;
|
|
u32 delay = mult_frac(1000000UL, data->frame_interval.numerator,
|
|
data->frame_interval.denominator);
|
|
s64 end_us = ktime_to_us(ktime_get());
|
|
|
|
set_freezable();
|
|
|
|
do {
|
|
struct video_i2c_buffer *vid_cap_buf = NULL;
|
|
s64 current_us;
|
|
int schedule_delay;
|
|
|
|
try_to_freeze();
|
|
|
|
spin_lock(&data->slock);
|
|
|
|
if (!list_empty(&data->vid_cap_active)) {
|
|
vid_cap_buf = list_last_entry(&data->vid_cap_active,
|
|
struct video_i2c_buffer, list);
|
|
list_del(&vid_cap_buf->list);
|
|
}
|
|
|
|
spin_unlock(&data->slock);
|
|
|
|
if (vid_cap_buf) {
|
|
struct vb2_buffer *vb2_buf = &vid_cap_buf->vb.vb2_buf;
|
|
void *vbuf = vb2_plane_vaddr(vb2_buf, 0);
|
|
int ret;
|
|
|
|
ret = data->chip->xfer(data, vbuf);
|
|
vb2_buf->timestamp = ktime_get_ns();
|
|
vid_cap_buf->vb.sequence = data->sequence++;
|
|
vb2_buffer_done(vb2_buf, ret ?
|
|
VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
|
|
}
|
|
|
|
end_us += delay;
|
|
current_us = ktime_to_us(ktime_get());
|
|
if (current_us < end_us) {
|
|
schedule_delay = end_us - current_us;
|
|
usleep_range(schedule_delay * 3 / 4, schedule_delay);
|
|
} else {
|
|
end_us = current_us;
|
|
}
|
|
} while (!kthread_should_stop());
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void video_i2c_del_list(struct vb2_queue *vq, enum vb2_buffer_state state)
|
|
{
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vq);
|
|
struct video_i2c_buffer *buf, *tmp;
|
|
|
|
spin_lock(&data->slock);
|
|
|
|
list_for_each_entry_safe(buf, tmp, &data->vid_cap_active, list) {
|
|
list_del(&buf->list);
|
|
vb2_buffer_done(&buf->vb.vb2_buf, state);
|
|
}
|
|
|
|
spin_unlock(&data->slock);
|
|
}
|
|
|
|
static int start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vq);
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
int ret;
|
|
|
|
if (data->kthread_vid_cap)
|
|
return 0;
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
goto error_del_list;
|
|
|
|
ret = data->chip->setup(data);
|
|
if (ret)
|
|
goto error_rpm_put;
|
|
|
|
data->sequence = 0;
|
|
data->kthread_vid_cap = kthread_run(video_i2c_thread_vid_cap, data,
|
|
"%s-vid-cap", data->v4l2_dev.name);
|
|
ret = PTR_ERR_OR_ZERO(data->kthread_vid_cap);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
error_rpm_put:
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
error_del_list:
|
|
video_i2c_del_list(vq, VB2_BUF_STATE_QUEUED);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct video_i2c_data *data = vb2_get_drv_priv(vq);
|
|
|
|
if (data->kthread_vid_cap == NULL)
|
|
return;
|
|
|
|
kthread_stop(data->kthread_vid_cap);
|
|
data->kthread_vid_cap = NULL;
|
|
pm_runtime_mark_last_busy(regmap_get_device(data->regmap));
|
|
pm_runtime_put_autosuspend(regmap_get_device(data->regmap));
|
|
|
|
video_i2c_del_list(vq, VB2_BUF_STATE_ERROR);
|
|
}
|
|
|
|
static const struct vb2_ops video_i2c_video_qops = {
|
|
.queue_setup = queue_setup,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_queue = buffer_queue,
|
|
.start_streaming = start_streaming,
|
|
.stop_streaming = stop_streaming,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
};
|
|
|
|
static int video_i2c_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *vcap)
|
|
{
|
|
struct video_i2c_data *data = video_drvdata(file);
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
strscpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver));
|
|
strscpy(vcap->card, data->vdev.name, sizeof(vcap->card));
|
|
|
|
sprintf(vcap->bus_info, "I2C:%d-%d", client->adapter->nr, client->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_g_input(struct file *file, void *fh, unsigned int *inp)
|
|
{
|
|
*inp = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_s_input(struct file *file, void *fh, unsigned int inp)
|
|
{
|
|
return (inp > 0) ? -EINVAL : 0;
|
|
}
|
|
|
|
static int video_i2c_enum_input(struct file *file, void *fh,
|
|
struct v4l2_input *vin)
|
|
{
|
|
if (vin->index > 0)
|
|
return -EINVAL;
|
|
|
|
strscpy(vin->name, "Camera", sizeof(vin->name));
|
|
|
|
vin->type = V4L2_INPUT_TYPE_CAMERA;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_enum_fmt_vid_cap(struct file *file, void *fh,
|
|
struct v4l2_fmtdesc *fmt)
|
|
{
|
|
struct video_i2c_data *data = video_drvdata(file);
|
|
enum v4l2_buf_type type = fmt->type;
|
|
|
|
if (fmt->index > 0)
|
|
return -EINVAL;
|
|
|
|
*fmt = *data->chip->format;
|
|
fmt->type = type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_enum_framesizes(struct file *file, void *fh,
|
|
struct v4l2_frmsizeenum *fsize)
|
|
{
|
|
const struct video_i2c_data *data = video_drvdata(file);
|
|
const struct v4l2_frmsize_discrete *size = data->chip->size;
|
|
|
|
/* currently only one frame size is allowed */
|
|
if (fsize->index > 0)
|
|
return -EINVAL;
|
|
|
|
if (fsize->pixel_format != data->chip->format->pixelformat)
|
|
return -EINVAL;
|
|
|
|
fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
|
|
fsize->discrete.width = size->width;
|
|
fsize->discrete.height = size->height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_enum_frameintervals(struct file *file, void *priv,
|
|
struct v4l2_frmivalenum *fe)
|
|
{
|
|
const struct video_i2c_data *data = video_drvdata(file);
|
|
const struct v4l2_frmsize_discrete *size = data->chip->size;
|
|
|
|
if (fe->index >= data->chip->num_frame_intervals)
|
|
return -EINVAL;
|
|
|
|
if (fe->width != size->width || fe->height != size->height)
|
|
return -EINVAL;
|
|
|
|
fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
|
|
fe->discrete = data->chip->frame_intervals[fe->index];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_try_fmt_vid_cap(struct file *file, void *fh,
|
|
struct v4l2_format *fmt)
|
|
{
|
|
const struct video_i2c_data *data = video_drvdata(file);
|
|
const struct v4l2_frmsize_discrete *size = data->chip->size;
|
|
struct v4l2_pix_format *pix = &fmt->fmt.pix;
|
|
unsigned int bpp = data->chip->bpp / 8;
|
|
|
|
pix->width = size->width;
|
|
pix->height = size->height;
|
|
pix->pixelformat = data->chip->format->pixelformat;
|
|
pix->field = V4L2_FIELD_NONE;
|
|
pix->bytesperline = pix->width * bpp;
|
|
pix->sizeimage = pix->bytesperline * pix->height;
|
|
pix->colorspace = V4L2_COLORSPACE_RAW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_s_fmt_vid_cap(struct file *file, void *fh,
|
|
struct v4l2_format *fmt)
|
|
{
|
|
struct video_i2c_data *data = video_drvdata(file);
|
|
|
|
if (vb2_is_busy(&data->vb_vidq))
|
|
return -EBUSY;
|
|
|
|
return video_i2c_try_fmt_vid_cap(file, fh, fmt);
|
|
}
|
|
|
|
static int video_i2c_g_parm(struct file *filp, void *priv,
|
|
struct v4l2_streamparm *parm)
|
|
{
|
|
struct video_i2c_data *data = video_drvdata(filp);
|
|
|
|
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
parm->parm.capture.readbuffers = 1;
|
|
parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
|
|
parm->parm.capture.timeperframe = data->frame_interval;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_i2c_s_parm(struct file *filp, void *priv,
|
|
struct v4l2_streamparm *parm)
|
|
{
|
|
struct video_i2c_data *data = video_drvdata(filp);
|
|
int i;
|
|
|
|
for (i = 0; i < data->chip->num_frame_intervals - 1; i++) {
|
|
if (V4L2_FRACT_COMPARE(parm->parm.capture.timeperframe, <=,
|
|
data->chip->frame_intervals[i]))
|
|
break;
|
|
}
|
|
data->frame_interval = data->chip->frame_intervals[i];
|
|
|
|
return video_i2c_g_parm(filp, priv, parm);
|
|
}
|
|
|
|
static const struct v4l2_ioctl_ops video_i2c_ioctl_ops = {
|
|
.vidioc_querycap = video_i2c_querycap,
|
|
.vidioc_g_input = video_i2c_g_input,
|
|
.vidioc_s_input = video_i2c_s_input,
|
|
.vidioc_enum_input = video_i2c_enum_input,
|
|
.vidioc_enum_fmt_vid_cap = video_i2c_enum_fmt_vid_cap,
|
|
.vidioc_enum_framesizes = video_i2c_enum_framesizes,
|
|
.vidioc_enum_frameintervals = video_i2c_enum_frameintervals,
|
|
.vidioc_g_fmt_vid_cap = video_i2c_try_fmt_vid_cap,
|
|
.vidioc_s_fmt_vid_cap = video_i2c_s_fmt_vid_cap,
|
|
.vidioc_g_parm = video_i2c_g_parm,
|
|
.vidioc_s_parm = video_i2c_s_parm,
|
|
.vidioc_try_fmt_vid_cap = video_i2c_try_fmt_vid_cap,
|
|
.vidioc_reqbufs = vb2_ioctl_reqbufs,
|
|
.vidioc_create_bufs = vb2_ioctl_create_bufs,
|
|
.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
|
|
.vidioc_querybuf = vb2_ioctl_querybuf,
|
|
.vidioc_qbuf = vb2_ioctl_qbuf,
|
|
.vidioc_dqbuf = vb2_ioctl_dqbuf,
|
|
.vidioc_streamon = vb2_ioctl_streamon,
|
|
.vidioc_streamoff = vb2_ioctl_streamoff,
|
|
};
|
|
|
|
static void video_i2c_release(struct video_device *vdev)
|
|
{
|
|
struct video_i2c_data *data = video_get_drvdata(vdev);
|
|
|
|
v4l2_device_unregister(&data->v4l2_dev);
|
|
mutex_destroy(&data->lock);
|
|
mutex_destroy(&data->queue_lock);
|
|
regmap_exit(data->regmap);
|
|
kfree(data);
|
|
}
|
|
|
|
static int video_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct video_i2c_data *data;
|
|
struct v4l2_device *v4l2_dev;
|
|
struct vb2_queue *queue;
|
|
int ret = -ENODEV;
|
|
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
if (dev_fwnode(&client->dev))
|
|
data->chip = device_get_match_data(&client->dev);
|
|
else if (id)
|
|
data->chip = &video_i2c_chip[id->driver_data];
|
|
else
|
|
goto error_free_device;
|
|
|
|
data->regmap = regmap_init_i2c(client, data->chip->regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
ret = PTR_ERR(data->regmap);
|
|
goto error_free_device;
|
|
}
|
|
|
|
v4l2_dev = &data->v4l2_dev;
|
|
strscpy(v4l2_dev->name, VIDEO_I2C_DRIVER, sizeof(v4l2_dev->name));
|
|
|
|
ret = v4l2_device_register(&client->dev, v4l2_dev);
|
|
if (ret < 0)
|
|
goto error_regmap_exit;
|
|
|
|
mutex_init(&data->lock);
|
|
mutex_init(&data->queue_lock);
|
|
|
|
queue = &data->vb_vidq;
|
|
queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
queue->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR | VB2_READ;
|
|
queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
queue->drv_priv = data;
|
|
queue->buf_struct_size = sizeof(struct video_i2c_buffer);
|
|
queue->min_buffers_needed = 1;
|
|
queue->ops = &video_i2c_video_qops;
|
|
queue->mem_ops = &vb2_vmalloc_memops;
|
|
|
|
ret = vb2_queue_init(queue);
|
|
if (ret < 0)
|
|
goto error_unregister_device;
|
|
|
|
data->vdev.queue = queue;
|
|
data->vdev.queue->lock = &data->queue_lock;
|
|
|
|
snprintf(data->vdev.name, sizeof(data->vdev.name),
|
|
"I2C %d-%d Transport Video",
|
|
client->adapter->nr, client->addr);
|
|
|
|
data->vdev.v4l2_dev = v4l2_dev;
|
|
data->vdev.fops = &video_i2c_fops;
|
|
data->vdev.lock = &data->lock;
|
|
data->vdev.ioctl_ops = &video_i2c_ioctl_ops;
|
|
data->vdev.release = video_i2c_release;
|
|
data->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE |
|
|
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
|
|
|
|
spin_lock_init(&data->slock);
|
|
INIT_LIST_HEAD(&data->vid_cap_active);
|
|
|
|
data->frame_interval = data->chip->frame_intervals[0];
|
|
|
|
video_set_drvdata(&data->vdev, data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
if (data->chip->set_power) {
|
|
ret = data->chip->set_power(data, true);
|
|
if (ret)
|
|
goto error_unregister_device;
|
|
}
|
|
|
|
pm_runtime_get_noresume(&client->dev);
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev, 2000);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
|
|
if (data->chip->hwmon_init) {
|
|
ret = data->chip->hwmon_init(data);
|
|
if (ret < 0) {
|
|
dev_warn(&client->dev,
|
|
"failed to register hwmon device\n");
|
|
}
|
|
}
|
|
|
|
if (data->chip->nvmem_config) {
|
|
struct nvmem_config *config = data->chip->nvmem_config;
|
|
struct nvmem_device *device;
|
|
|
|
config->priv = data;
|
|
config->dev = &client->dev;
|
|
|
|
device = devm_nvmem_register(&client->dev, config);
|
|
|
|
if (IS_ERR(device)) {
|
|
dev_warn(&client->dev,
|
|
"failed to register nvmem device\n");
|
|
}
|
|
}
|
|
|
|
ret = video_register_device(&data->vdev, VFL_TYPE_VIDEO, -1);
|
|
if (ret < 0)
|
|
goto error_pm_disable;
|
|
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
pm_runtime_put_autosuspend(&client->dev);
|
|
|
|
return 0;
|
|
|
|
error_pm_disable:
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
if (data->chip->set_power)
|
|
data->chip->set_power(data, false);
|
|
|
|
error_unregister_device:
|
|
v4l2_device_unregister(v4l2_dev);
|
|
mutex_destroy(&data->lock);
|
|
mutex_destroy(&data->queue_lock);
|
|
|
|
error_regmap_exit:
|
|
regmap_exit(data->regmap);
|
|
|
|
error_free_device:
|
|
kfree(data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void video_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct video_i2c_data *data = i2c_get_clientdata(client);
|
|
|
|
pm_runtime_get_sync(&client->dev);
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
if (data->chip->set_power)
|
|
data->chip->set_power(data, false);
|
|
|
|
video_unregister_device(&data->vdev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int video_i2c_pm_runtime_suspend(struct device *dev)
|
|
{
|
|
struct video_i2c_data *data = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
if (!data->chip->set_power)
|
|
return 0;
|
|
|
|
return data->chip->set_power(data, false);
|
|
}
|
|
|
|
static int video_i2c_pm_runtime_resume(struct device *dev)
|
|
{
|
|
struct video_i2c_data *data = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
if (!data->chip->set_power)
|
|
return 0;
|
|
|
|
return data->chip->set_power(data, true);
|
|
}
|
|
|
|
#endif
|
|
|
|
static const struct dev_pm_ops video_i2c_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(video_i2c_pm_runtime_suspend,
|
|
video_i2c_pm_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct i2c_device_id video_i2c_id_table[] = {
|
|
{ "amg88xx", AMG88XX },
|
|
{ "mlx90640", MLX90640 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, video_i2c_id_table);
|
|
|
|
static const struct of_device_id video_i2c_of_match[] = {
|
|
{ .compatible = "panasonic,amg88xx", .data = &video_i2c_chip[AMG88XX] },
|
|
{ .compatible = "melexis,mlx90640", .data = &video_i2c_chip[MLX90640] },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, video_i2c_of_match);
|
|
|
|
static struct i2c_driver video_i2c_driver = {
|
|
.driver = {
|
|
.name = VIDEO_I2C_DRIVER,
|
|
.of_match_table = video_i2c_of_match,
|
|
.pm = &video_i2c_pm_ops,
|
|
},
|
|
.probe = video_i2c_probe,
|
|
.remove = video_i2c_remove,
|
|
.id_table = video_i2c_id_table,
|
|
};
|
|
|
|
module_i2c_driver(video_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
|
|
MODULE_DESCRIPTION("I2C transport video support");
|
|
MODULE_LICENSE("GPL v2");
|