Martin Kepplinger ed859fc17d iio: mma8452: add support for oversampling ratio ...

This adds the following sysfs files according to the iio ABI:

-rw-r--r--    4096 in_accel_oversampling_ratio
-r--r--r--    4096 in_accel_oversampling_ratio_available

Internally, the device knows about 4 different power modes that differ
in oversampling ratio (and power consumption). We just show the user
what oversampling ratio(s) is/are available, depending on the current
frequency.

The referenced table in the datasheets makes it easier to understand.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2016-05-04 11:46:39 +01:00

..

accel

iio: mma8452: add support for oversampling ratio

2016-05-04 11:46:39 +01:00

adc

iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop

2016-05-04 10:44:28 +01:00

amplifiers

spi: Updates for v4.4

2015-11-05 13:15:12 -08:00

buffer

iio: buffer-dmaengine: Use dmaengine_terminate_sync()

2016-02-09 21:05:17 +00:00

chemical

iio: convert to common i2c_check_functionality() return value

2016-02-27 17:17:43 +00:00

common

iio: st_sensors: support open drain mode

2016-04-19 19:58:13 +01:00

dac

iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs

2016-04-10 14:29:06 +01:00

dummy

iio: dummy: Convert IIO dummy to configfs

2016-05-04 11:44:06 +01:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio: st_gyro: Add lsm9ds0-gyro support

2016-04-23 22:47:18 +01:00

health

iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register

2016-05-04 11:14:16 +01:00

humidity

iio: humidity: Add triggered buffer support for AM2315

2016-04-24 10:00:20 +01:00

imu

imu: bmi160: Add avail frequency and scale attributes

2016-05-04 10:51:39 +01:00

light

max44000: Initial triggered buffer support

2016-04-24 10:24:08 +01:00

magnetometer

iio: ak8975: Support adapters limited to BYTE_DATA

2016-05-01 17:54:38 +01:00

orientation

iio: orientation: hid-sensor-rotation: Fix memory leak in probe()

2015-05-17 09:10:25 +01:00

potentiometer

iio: potentiometer: add driver for Maxim Integrated DS1803

2016-04-10 12:34:09 +01:00

pressure

iio: pressure: bmp280: add ability to control oversampling rate

2016-04-25 19:05:29 +01:00

proximity

iio: convert to common i2c_check_functionality() return value

2016-02-27 17:17:43 +00:00

temperature

iio: convert to common i2c_check_functionality() return value

2016-02-27 17:17:43 +00:00

trigger

iio: trigger: Introduce IIO hrtimer based trigger

2015-12-03 18:19:27 +00:00

iio_core_trigger.h

…

iio_core.h

iio: Move buffer registration to the core

2014-12-12 12:28:31 +00:00

industrialio-buffer.c

iio: Add helper function for calculating scan index storage size

2016-02-06 18:21:35 +00:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio:core: mounting matrix support

2016-04-23 22:13:05 +01:00

industrialio-event.c

iio: event: Remove negative error code from iio_event_poll

2015-08-12 19:26:39 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: core: Add devm_ APIs for iio_channel_{get,release}_all

2016-04-19 19:58:15 +01:00

Kconfig

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

Makefile

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00