linux/drivers/gpu/drm/omapdrm/omap_overlay.c
Benoit Parrot e02b5cc9e8 drm/omap: Add a 'right overlay' to plane state
If the drm_plane has a source width that's greater than the max width
supported by a single hw overlay, then we assign a 'r_overlay' to it in
omap_plane_atomic_check().

Both overlays should have the capabilities required to handle the source
framebuffer. The only parameters that vary between the left and right
hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
the fb into left and right halves.

We also take care of not creating odd width size when dealing with YUV
formats.

Since both halves need to be 'appear' side by side the zpos is
recalculated when dealing with dual overlay cases so that the other
planes zpos is consistent.

Depending on user space usage it is possible that on occasion the number
of requested planes exceeds the numbers of overlays required to display
them. In that case a failure would be returned for the plane that cannot
be handled at that time. It is up to user space to make sure the H/W
resource are not over-subscribed.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
2021-12-08 10:04:54 +02:00

213 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Author: Benoit Parrot <bparrot@ti.com>
*/
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
/*
* overlay funcs
*/
static const char * const overlay_id_to_name[] = {
[OMAP_DSS_GFX] = "gfx",
[OMAP_DSS_VIDEO1] = "vid1",
[OMAP_DSS_VIDEO2] = "vid2",
[OMAP_DSS_VIDEO3] = "vid3",
};
/*
* Find a free overlay with the required caps and supported fourcc
*/
static struct omap_hw_overlay *
omap_plane_find_free_overlay(struct drm_device *dev, struct drm_plane *hwoverlay_to_plane[],
u32 caps, u32 fourcc)
{
struct omap_drm_private *priv = dev->dev_private;
int i;
DBG("caps: %x fourcc: %x", caps, fourcc);
for (i = 0; i < priv->num_ovls; i++) {
struct omap_hw_overlay *cur = priv->overlays[i];
DBG("%d: id: %d cur->caps: %x",
cur->idx, cur->id, cur->caps);
/* skip if already in-use */
if (hwoverlay_to_plane[cur->idx])
continue;
/* skip if doesn't support some required caps: */
if (caps & ~cur->caps)
continue;
/* check supported format */
if (!dispc_ovl_color_mode_supported(priv->dispc,
cur->id, fourcc))
continue;
return cur;
}
DBG("no match");
return NULL;
}
/*
* Assign a new overlay to a plane with the required caps and supported fourcc
* If a plane need a new overlay, the previous one should have been released
* with omap_overlay_release()
* This should be called from the plane atomic_check() in order to prepare the
* next global overlay_map to be enabled when atomic transaction is valid.
*/
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
u32 caps, u32 fourcc, struct omap_hw_overlay **overlay,
struct omap_hw_overlay **r_overlay)
{
/* Get the global state of the current atomic transaction */
struct omap_global_state *state = omap_get_global_state(s);
struct drm_plane **overlay_map = state->hwoverlay_to_plane;
struct omap_hw_overlay *ovl, *r_ovl;
ovl = omap_plane_find_free_overlay(s->dev, overlay_map, caps, fourcc);
if (!ovl)
return -ENOMEM;
overlay_map[ovl->idx] = plane;
*overlay = ovl;
if (r_overlay) {
r_ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
caps, fourcc);
if (!r_ovl) {
overlay_map[r_ovl->idx] = NULL;
*overlay = NULL;
return -ENOMEM;
}
overlay_map[r_ovl->idx] = plane;
*r_overlay = r_ovl;
}
DBG("%s: assign to plane %s caps %x", ovl->name, plane->name, caps);
if (r_overlay) {
DBG("%s: assign to right of plane %s caps %x",
r_ovl->name, plane->name, caps);
}
return 0;
}
/*
* Release an overlay from a plane if the plane gets not visible or the plane
* need a new overlay if overlay caps changes.
* This should be called from the plane atomic_check() in order to prepare the
* next global overlay_map to be enabled when atomic transaction is valid.
*/
void omap_overlay_release(struct drm_atomic_state *s, struct omap_hw_overlay *overlay)
{
/* Get the global state of the current atomic transaction */
struct omap_global_state *state = omap_get_global_state(s);
struct drm_plane **overlay_map = state->hwoverlay_to_plane;
if (!overlay)
return;
if (WARN_ON(!overlay_map[overlay->idx]))
return;
DBG("%s: release from plane %s", overlay->name, overlay_map[overlay->idx]->name);
overlay_map[overlay->idx] = NULL;
}
/*
* Update an overlay state that was attached to a plane before the current atomic state.
* This should be called from the plane atomic_update() or atomic_disable(),
* where an overlay association to a plane could have changed between the old and current
* atomic state.
*/
void omap_overlay_update_state(struct omap_drm_private *priv,
struct omap_hw_overlay *overlay)
{
struct omap_global_state *state = omap_get_existing_global_state(priv);
struct drm_plane **overlay_map = state->hwoverlay_to_plane;
/* Check if this overlay is not used anymore, then disable it */
if (!overlay_map[overlay->idx]) {
DBG("%s: disabled", overlay->name);
/* disable the overlay */
dispc_ovl_enable(priv->dispc, overlay->id, false);
}
}
static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
{
kfree(overlay);
}
static struct omap_hw_overlay *omap_overlay_init(enum omap_plane_id overlay_id,
enum omap_overlay_caps caps)
{
struct omap_hw_overlay *overlay;
overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
if (!overlay)
return ERR_PTR(-ENOMEM);
overlay->name = overlay_id_to_name[overlay_id];
overlay->id = overlay_id;
overlay->caps = caps;
return overlay;
}
int omap_hwoverlays_init(struct omap_drm_private *priv)
{
static const enum omap_plane_id hw_plane_ids[] = {
OMAP_DSS_GFX, OMAP_DSS_VIDEO1,
OMAP_DSS_VIDEO2, OMAP_DSS_VIDEO3,
};
u32 num_overlays = dispc_get_num_ovls(priv->dispc);
enum omap_overlay_caps caps;
int i, ret;
for (i = 0; i < num_overlays; i++) {
struct omap_hw_overlay *overlay;
caps = dispc_ovl_get_caps(priv->dispc, hw_plane_ids[i]);
overlay = omap_overlay_init(hw_plane_ids[i], caps);
if (IS_ERR(overlay)) {
ret = PTR_ERR(overlay);
dev_err(priv->dev, "failed to construct overlay for %s (%d)\n",
overlay_id_to_name[i], ret);
omap_hwoverlays_destroy(priv);
return ret;
}
overlay->idx = priv->num_ovls;
priv->overlays[priv->num_ovls++] = overlay;
}
return 0;
}
void omap_hwoverlays_destroy(struct omap_drm_private *priv)
{
int i;
for (i = 0; i < priv->num_ovls; i++) {
omap_overlay_destroy(priv->overlays[i]);
priv->overlays[i] = NULL;
}
priv->num_ovls = 0;
}