linux/arch/arm/mach-mmp/Kconfig
Lubomir Rintel ee4df23634 clk: mmp2: Add support for power islands
Apart from the clocks and resets, the PMU hardware also controls power
to peripherals that are on separate power islands. On MMP2, that's the
GC860 GPU and the SSPA audio interface, while on MMP3 also the camera
interface is on a separate island, along with the pair of GC2000 and GC300
GPUs and the SSPA.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200519224151.2074597-12-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27 17:55:12 -07:00

182 lines
4.6 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_MMP
bool "Marvell PXA168/910/MMP2/MMP3"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
select GPIO_PXA
select GPIOLIB
select PINCTRL
select PLAT_PXA
help
Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines.
if ARCH_MMP
menu "Marvell PXA168/910/MMP2 Implementations"
if ATAGS
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Aspenite Development Board.
config MACH_ZYLONITE2
bool "Marvell's PXA168 Zylonite2 Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Zylonite2 Development Board.
config MACH_AVENGERS_LITE
bool "Marvell's PXA168 Avengers Lite Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Avengers Lite Development Board.
config MACH_TAVOREVB
bool "Marvell's PXA910 TavorEVB Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TavorEVB Development Board.
config MACH_TTC_DKB
bool "Marvell's PXA910 TavorEVB Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
config MACH_BROWNSTONE
bool "Marvell's Brownstone Development Platform"
depends on ARCH_MULTI_V7
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Brown Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_FLINT
bool "Marvell's Flint Development Platform"
depends on ARCH_MULTI_V7
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Flint Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
depends on ARCH_MULTI_V7
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
Jasper Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
depends on ARCH_MULTI_V5
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
depends on ARCH_MULTI_V5
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
GuruPlug Display (gplugD) Board
endif
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
depends on ARCH_MULTI_V5
select PINCTRL
select PINCTRL_SINGLE
select COMMON_CLK
select ARCH_HAS_RESET_CONTROLLER
select CPU_MOHAWK
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
MACH_MMP_DT is enabled.
config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on ARCH_MULTI_V7
select PINCTRL
select PINCTRL_SINGLE
select ARCH_HAS_RESET_CONTROLLER
select CPU_PJ4
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
help
Include support for Marvell MMP2 based platforms using
the device tree.
config MACH_MMP3_DT
bool "Support MMP3 (ARMv7) platforms"
depends on ARCH_MULTI_V7
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select CACHE_L2X0
select PINCTRL
select PINCTRL_SINGLE
select ARCH_HAS_RESET_CONTROLLER
select CPU_PJ4B
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
help
Say 'Y' here if you want to include support for platforms
with Marvell MMP3 processor, also known as PXA2128 or
Armada 620.
endmenu
config CPU_PXA168
bool
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config USB_EHCI_MV_U2O
bool "EHCI support for PXA USB OTG controller"
depends on USB_EHCI_MV
help
Enables support for OTG controller which can be switched to host mode.
config MMP_SRAM
bool
endif