linux/drivers/net/phy
Andrew Lunn 0263ea5cdd net: phy: mdio-boardinfo: Allow recursive mdiobus_register()
mdiobus_register will search for any mdiobus board info registered for
the bus being registered. If found, it will probe devices on the bus.
That device, if for example it is an ethernet switch, may then try to
register an mdio bus. Thus we need to allow recursive calls to
mdiobus_register.

Holding the mdio_board_lock will cause a deadlock during this
recursion. Release the lock and use list_for_each_entry_safe.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20 10:33:26 -04:00
..
amd.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
aquantia.c net: phy: aquantia: Utilize genphy_c45_aneg_done() 2018-03-01 21:23:34 -05:00
asix.c net-next: phy: new Asix Electronics PHY driver 2018-04-19 16:11:10 -04:00
at803x.c net: phy: fix wrong masks to phy_modify() 2018-01-08 14:20:21 -05:00
bcm7xxx.c net: phy: Fix spelling mistake: "advertisment"-> "advertisement" 2018-03-04 18:11:54 -05:00
bcm63xx.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
bcm87xx.c
bcm-cygnus.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
bcm-phy-lib.c net: phy: broadcom: Use strlcpy() for ethtool::get_strings 2018-03-06 11:12:39 -05:00
bcm-phy-lib.h net: phy: broadcom: Add support code for reading PHY counters 2016-11-30 10:22:27 -05:00
broadcom.c net: phy: broadcom: Add entry for 5395 switch PHYs 2017-12-15 15:41:13 -05:00
cicada.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
cortina.c net: phy: cortina: Utilize generic functions 2018-03-01 21:23:35 -05:00
davicom.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
dp83640_reg.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dp83640.c dp83640: Ensure against premature access to PHY registers after reset 2018-04-08 19:58:52 -04:00
dp83822.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
dp83848.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
dp83867.c net: phy: dp83867: Add binding for the CLK_OUT pin muxing option 2018-02-14 15:33:43 -05:00
et1011c.c
fixed_phy.c net: phy: fixed-phy: remove fixed_phy_update_state() 2018-01-03 10:38:54 -05:00
icplus.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
intel-xway.c net: phy: intel-xway: add VR9 v1.1 phy ids 2018-03-23 13:19:49 -04:00
Kconfig net-next: phy: new Asix Electronics PHY driver 2018-04-19 16:11:10 -04:00
lxt.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
Makefile net-next: phy: new Asix Electronics PHY driver 2018-04-19 16:11:10 -04:00
marvell10g.c net: phy: marvell10g: add thermal hwmon device 2018-04-04 11:24:54 -04:00
marvell.c net: phy: marvell: Enable interrupt function on LED2 pin 2018-04-06 13:36:57 -04:00
mdio_bus.c net: phy: Handle not having GPIO enabled in the kernel 2018-02-06 11:20:17 -05:00
mdio_device.c phylib: rename reset-(post-)delay-us to reset-(de)assert-us 2017-12-27 11:06:50 -05:00
mdio-bcm-iproc.c net: phy: Initialize mdio clock at probe function 2017-02-09 17:10:23 -05:00
mdio-bcm-unimac.c net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe() 2018-01-11 13:56:24 -05:00
mdio-bitbang.c net: phy: mdio-bitbang: Remove reset support 2018-04-19 15:59:10 -04:00
mdio-boardinfo.c net: phy: mdio-boardinfo: Allow recursive mdiobus_register() 2018-04-20 10:33:26 -04:00
mdio-boardinfo.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mdio-cavium.c
mdio-cavium.h
mdio-gpio.c net: phy: mdio-gpio: Remove redundant platform data header 2018-04-19 15:59:11 -04:00
mdio-hisi-femac.c
mdio-i2c.c net: phy: add I2C mdio bus 2017-08-06 20:55:28 -07:00
mdio-i2c.h net: phy: add I2C mdio bus 2017-08-06 20:55:28 -07:00
mdio-moxart.c
mdio-mux-bcm-iproc.c net: mdio-mux: add mdio_mux parameter to mdio_mux_init() 2017-09-05 14:42:52 -07:00
mdio-mux-gpio.c net: mdio-mux: add mdio_mux parameter to mdio_mux_init() 2017-09-05 14:42:52 -07:00
mdio-mux-mmioreg.c net: phy: mdio-mux: slience probe defer error 2018-03-07 12:39:59 -05:00
mdio-mux.c net: mdio-mux: add mdio_mux parameter to mdio_mux_init() 2017-09-05 14:42:52 -07:00
mdio-octeon.c
mdio-sun4i.c mdio-sun4i: Fix a memory leak 2018-01-08 14:30:28 -05:00
mdio-thunder.c
mdio-xgene.c net: phy: xgene: disable clk on error paths 2017-12-18 15:09:42 -05:00
mdio-xgene.h drivers: net: phy: xgene: Add lock to protect mac access 2017-05-16 11:41:08 -04:00
meson-gxl.c net: phy: meson-gxl: join the authors 2017-12-18 13:24:56 -05:00
micrel.c net: phy: micrel: Use the general dummy stubs for MMD register access 2018-03-22 11:41:08 -04:00
microchip.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
mscc.c net: phy: Add LED mode driver for Microsemi PHYs. 2017-02-08 13:29:04 -05:00
national.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
phy_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-03-23 11:31:58 -04:00
phy_led_triggers.c net: phy: leds: Add support for "link" trigger 2017-11-08 10:24:14 +09:00
phy-c45.c net: phy: Fix spelling mistake: "advertisment"-> "advertisement" 2018-03-04 18:11:54 -05:00
phy-core.c net: phy: Fix spelling mistake: "advertisment"-> "advertisement" 2018-03-04 18:11:54 -05:00
phy.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-03-23 11:31:58 -04:00
phylink.c sfp/phylink: move module EEPROM ethtool access into netdev core ethtool 2018-03-30 10:11:06 -04:00
qsemi.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
realtek.c net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211b 2018-03-22 11:41:07 -04:00
rockchip.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
sfp-bus.c sfp/phylink: move module EEPROM ethtool access into netdev core ethtool 2018-03-30 10:11:06 -04:00
sfp.c sfp: allow cotsworks modules 2018-03-29 14:30:41 -04:00
sfp.h sfp: add sfp-bus to bridge between network devices and sfp cages 2017-08-06 20:55:29 -07:00
smsc.c net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag 2017-12-13 11:22:54 -05:00
spi_ks8995.c drivers/net: Use octal not symbolic permissions 2018-03-26 12:07:49 -04:00
ste10Xp.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
swphy.c
swphy.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
teranetics.c net: phy: teranetics: Utilize generic functions 2018-03-01 21:23:34 -05:00
uPD60620.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
vitesse.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
xilinx_gmii2rgmii.c net: phy: Fix mask value write on gmii2rgmii converter speed register 2017-09-18 16:33:18 -07:00