d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
316 lines
7.3 KiB
C
316 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* AD5624R, AD5644R, AD5664R Digital to analog convertors spi driver
|
|
*
|
|
* Copyright 2010-2011 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "ad5624r.h"
|
|
|
|
static int ad5624r_spi_write(struct spi_device *spi,
|
|
u8 cmd, u8 addr, u16 val, u8 shift)
|
|
{
|
|
u32 data;
|
|
u8 msg[3];
|
|
|
|
/*
|
|
* The input shift register is 24 bits wide. The first two bits are
|
|
* don't care bits. The next three are the command bits, C2 to C0,
|
|
* followed by the 3-bit DAC address, A2 to A0, and then the
|
|
* 16-, 14-, 12-bit data-word. The data-word comprises the 16-,
|
|
* 14-, 12-bit input code followed by 0, 2, or 4 don't care bits,
|
|
* for the AD5664R, AD5644R, and AD5624R, respectively.
|
|
*/
|
|
data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift);
|
|
put_unaligned_be24(data, &msg[0]);
|
|
|
|
return spi_write(spi, msg, sizeof(msg));
|
|
}
|
|
|
|
static int ad5624r_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = st->vref_mv;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad5624r_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (val >= (1 << chan->scan_type.realbits) || val < 0)
|
|
return -EINVAL;
|
|
|
|
return ad5624r_spi_write(st->us,
|
|
AD5624R_CMD_WRITE_INPUT_N_UPDATE_N,
|
|
chan->address, val,
|
|
chan->scan_type.shift);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const char * const ad5624r_powerdown_modes[] = {
|
|
"1kohm_to_gnd",
|
|
"100kohm_to_gnd",
|
|
"three_state"
|
|
};
|
|
|
|
static int ad5624r_get_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
return st->pwr_down_mode;
|
|
}
|
|
|
|
static int ad5624r_set_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, unsigned int mode)
|
|
{
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
st->pwr_down_mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_enum ad5624r_powerdown_mode_enum = {
|
|
.items = ad5624r_powerdown_modes,
|
|
.num_items = ARRAY_SIZE(ad5624r_powerdown_modes),
|
|
.get = ad5624r_get_powerdown_mode,
|
|
.set = ad5624r_set_powerdown_mode,
|
|
};
|
|
|
|
static ssize_t ad5624r_read_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, char *buf)
|
|
{
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
!!(st->pwr_down_mask & (1 << chan->channel)));
|
|
}
|
|
|
|
static ssize_t ad5624r_write_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
|
|
size_t len)
|
|
{
|
|
bool pwr_down;
|
|
int ret;
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
ret = strtobool(buf, &pwr_down);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (pwr_down)
|
|
st->pwr_down_mask |= (1 << chan->channel);
|
|
else
|
|
st->pwr_down_mask &= ~(1 << chan->channel);
|
|
|
|
ret = ad5624r_spi_write(st->us, AD5624R_CMD_POWERDOWN_DAC, 0,
|
|
(st->pwr_down_mode << 4) |
|
|
st->pwr_down_mask, 16);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static const struct iio_info ad5624r_info = {
|
|
.write_raw = ad5624r_write_raw,
|
|
.read_raw = ad5624r_read_raw,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info ad5624r_ext_info[] = {
|
|
{
|
|
.name = "powerdown",
|
|
.read = ad5624r_read_dac_powerdown,
|
|
.write = ad5624r_write_dac_powerdown,
|
|
.shared = IIO_SEPARATE,
|
|
},
|
|
IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE,
|
|
&ad5624r_powerdown_mode_enum),
|
|
IIO_ENUM_AVAILABLE("powerdown_mode", &ad5624r_powerdown_mode_enum),
|
|
{ },
|
|
};
|
|
|
|
#define AD5624R_CHANNEL(_chan, _bits) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.output = 1, \
|
|
.channel = (_chan), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.address = (_chan), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = (_bits), \
|
|
.storagebits = 16, \
|
|
.shift = 16 - (_bits), \
|
|
}, \
|
|
.ext_info = ad5624r_ext_info, \
|
|
}
|
|
|
|
#define DECLARE_AD5624R_CHANNELS(_name, _bits) \
|
|
const struct iio_chan_spec _name##_channels[] = { \
|
|
AD5624R_CHANNEL(0, _bits), \
|
|
AD5624R_CHANNEL(1, _bits), \
|
|
AD5624R_CHANNEL(2, _bits), \
|
|
AD5624R_CHANNEL(3, _bits), \
|
|
}
|
|
|
|
static DECLARE_AD5624R_CHANNELS(ad5624r, 12);
|
|
static DECLARE_AD5624R_CHANNELS(ad5644r, 14);
|
|
static DECLARE_AD5624R_CHANNELS(ad5664r, 16);
|
|
|
|
static const struct ad5624r_chip_info ad5624r_chip_info_tbl[] = {
|
|
[ID_AD5624R3] = {
|
|
.channels = ad5624r_channels,
|
|
.int_vref_mv = 1250,
|
|
},
|
|
[ID_AD5624R5] = {
|
|
.channels = ad5624r_channels,
|
|
.int_vref_mv = 2500,
|
|
},
|
|
[ID_AD5644R3] = {
|
|
.channels = ad5644r_channels,
|
|
.int_vref_mv = 1250,
|
|
},
|
|
[ID_AD5644R5] = {
|
|
.channels = ad5644r_channels,
|
|
.int_vref_mv = 2500,
|
|
},
|
|
[ID_AD5664R3] = {
|
|
.channels = ad5664r_channels,
|
|
.int_vref_mv = 1250,
|
|
},
|
|
[ID_AD5664R5] = {
|
|
.channels = ad5664r_channels,
|
|
.int_vref_mv = 2500,
|
|
},
|
|
};
|
|
|
|
static int ad5624r_probe(struct spi_device *spi)
|
|
{
|
|
struct ad5624r_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret, voltage_uv = 0;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
st = iio_priv(indio_dev);
|
|
st->reg = devm_regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_get_voltage(st->reg);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
voltage_uv = ret;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->chip_info =
|
|
&ad5624r_chip_info_tbl[spi_get_device_id(spi)->driver_data];
|
|
|
|
if (voltage_uv)
|
|
st->vref_mv = voltage_uv / 1000;
|
|
else
|
|
st->vref_mv = st->chip_info->int_vref_mv;
|
|
|
|
st->us = spi;
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->info = &ad5624r_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = st->chip_info->channels;
|
|
indio_dev->num_channels = AD5624R_DAC_CHANNELS;
|
|
|
|
ret = ad5624r_spi_write(spi, AD5624R_CMD_INTERNAL_REFER_SETUP, 0,
|
|
!!voltage_uv, 16);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad5624r_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad5624r_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad5624r_id[] = {
|
|
{"ad5624r3", ID_AD5624R3},
|
|
{"ad5644r3", ID_AD5644R3},
|
|
{"ad5664r3", ID_AD5664R3},
|
|
{"ad5624r5", ID_AD5624R5},
|
|
{"ad5644r5", ID_AD5644R5},
|
|
{"ad5664r5", ID_AD5664R5},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad5624r_id);
|
|
|
|
static struct spi_driver ad5624r_driver = {
|
|
.driver = {
|
|
.name = "ad5624r",
|
|
},
|
|
.probe = ad5624r_probe,
|
|
.remove = ad5624r_remove,
|
|
.id_table = ad5624r_id,
|
|
};
|
|
module_spi_driver(ad5624r_driver);
|
|
|
|
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD5624/44/64R DAC spi driver");
|
|
MODULE_LICENSE("GPL v2");
|