iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f3e3464ec8
linux/drivers/hwmon/max1619.c
Stephen Kitt 6748703856 hwmon: use simple i2c probe function 
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:39 -07:00

319 lines
8.7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max1619.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
* Jean Delvare <jdelvare@suse.de>
*
* Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
* It reports up to two temperatures (its own plus up to
* one external one). Complete datasheet can be
* obtained from Maxim's website at:
* http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
static const unsigned short normal_i2c[] = {
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
/*
* The MAX1619 registers
*/
#define MAX1619_REG_R_MAN_ID 0xFE
#define MAX1619_REG_R_CHIP_ID 0xFF
#define MAX1619_REG_R_CONFIG 0x03
#define MAX1619_REG_W_CONFIG 0x09
#define MAX1619_REG_R_CONVRATE 0x04
#define MAX1619_REG_W_CONVRATE 0x0A
#define MAX1619_REG_R_STATUS 0x02
#define MAX1619_REG_R_LOCAL_TEMP 0x00
#define MAX1619_REG_R_REMOTE_TEMP 0x01
#define MAX1619_REG_R_REMOTE_HIGH 0x07
#define MAX1619_REG_W_REMOTE_HIGH 0x0D
#define MAX1619_REG_R_REMOTE_LOW 0x08
#define MAX1619_REG_W_REMOTE_LOW 0x0E
#define MAX1619_REG_R_REMOTE_CRIT 0x10
#define MAX1619_REG_W_REMOTE_CRIT 0x12
#define MAX1619_REG_R_TCRIT_HYST 0x11
#define MAX1619_REG_W_TCRIT_HYST 0x13
/*
* Conversions
*/
static int temp_from_reg(int val)
{
return (val & 0x80 ? val-0x100 : val) * 1000;
}
static int temp_to_reg(int val)
{
return (val < 0 ? val+0x100*1000 : val) / 1000;
}
enum temp_index {
t_input1 = 0,
t_input2,
t_low2,
t_high2,
t_crit2,
t_hyst2,
t_num_regs
};
/*
* Client data (each client gets its own)
*/
struct max1619_data {
struct i2c_client *client;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* registers values */
u8 temp[t_num_regs]; /* index with enum temp_index */
u8 alarms;
};
static const u8 regs_read[t_num_regs] = {
[t_input1] = MAX1619_REG_R_LOCAL_TEMP,
[t_input2] = MAX1619_REG_R_REMOTE_TEMP,
[t_low2] = MAX1619_REG_R_REMOTE_LOW,
[t_high2] = MAX1619_REG_R_REMOTE_HIGH,
[t_crit2] = MAX1619_REG_R_REMOTE_CRIT,
[t_hyst2] = MAX1619_REG_R_TCRIT_HYST,
};
static const u8 regs_write[t_num_regs] = {
[t_low2] = MAX1619_REG_W_REMOTE_LOW,
[t_high2] = MAX1619_REG_W_REMOTE_HIGH,
[t_crit2] = MAX1619_REG_W_REMOTE_CRIT,
[t_hyst2] = MAX1619_REG_W_TCRIT_HYST,
};
static struct max1619_data *max1619_update_device(struct device *dev)
{
struct max1619_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int config, i;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Updating max1619 data.\n");
for (i = 0; i < t_num_regs; i++)
data->temp[i] = i2c_smbus_read_byte_data(client,
regs_read[i]);
data->alarms = i2c_smbus_read_byte_data(client,
MAX1619_REG_R_STATUS);
/* If OVERT polarity is low, reverse alarm bit */
config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
if (!(config & 0x20))
data->alarms ^= 0x02;
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
/*
* Sysfs stuff
*/
static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct max1619_data *data = max1619_update_device(dev);
return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index]));
}
static ssize_t temp_store(struct device *dev,
struct device_attribute *devattr, const char *buf,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct max1619_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long val;
int err = kstrtol(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->temp[attr->index] = temp_to_reg(val);
i2c_smbus_write_byte_data(client, regs_write[attr->index],
data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct max1619_data *data = max1619_update_device(dev);
return sprintf(buf, "%d\n", data->alarms);
}
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct max1619_data *data = max1619_update_device(dev);
return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1);
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2);
static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2);
static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2);
static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2);
static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2);
static DEVICE_ATTR_RO(alarms);
static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1);
static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2);
static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3);
static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4);
static struct attribute *max1619_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
&dev_attr_alarms.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(max1619);
/* Return 0 if detection is successful, -ENODEV otherwise */
static int max1619_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* detection */
reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
if ((reg_config & 0x03) != 0x00
|| reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
client->addr);
return -ENODEV;
}
/* identification */
man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
if (man_id != 0x4D || chip_id != 0x04) {
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
man_id, chip_id);
return -ENODEV;
}
strlcpy(info->type, "max1619", I2C_NAME_SIZE);
return 0;
}
static void max1619_init_client(struct i2c_client *client)
{
u8 config;
/*
* Start the conversions.
*/
i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
5); /* 2 Hz */
config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
if (config & 0x40)
i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
config & 0xBF); /* run */
}
static int max1619_probe(struct i2c_client *new_client)
{
struct max1619_data *data;
struct device *hwmon_dev;
data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = new_client;
mutex_init(&data->update_lock);
/* Initialize the MAX1619 chip */
max1619_init_client(new_client);
hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
new_client->name,
data,
max1619_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id max1619_id[] = {
{ "max1619", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max1619_id);
#ifdef CONFIG_OF
static const struct of_device_id max1619_of_match[] = {
{ .compatible = "maxim,max1619", },
{},
};
MODULE_DEVICE_TABLE(of, max1619_of_match);
#endif
static struct i2c_driver max1619_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "max1619",
.of_match_table = of_match_ptr(max1619_of_match),
},
.probe_new = max1619_probe,
.id_table = max1619_id,
.detect = max1619_detect,
.address_list = normal_i2c,
};
module_i2c_driver(max1619_driver);
MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("MAX1619 sensor driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink