f73dc3db4f
Just IDs for diagnostics, nothing is actually supported. Not all of these have board numbers assigned yet, these will be updated as the numbers are assigned. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
262 lines
6.5 KiB
C
262 lines
6.5 KiB
C
/* Speyside modules for Cragganmore - board data probing
|
|
*
|
|
* Copyright 2011 Wolfson Microelectronics plc
|
|
* Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/mfd/wm831x/irq.h>
|
|
#include <linux/mfd/wm831x/gpio.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
|
|
#include <sound/wm5100.h>
|
|
#include <sound/wm8996.h>
|
|
#include <sound/wm8962.h>
|
|
#include <sound/wm9081.h>
|
|
|
|
#include <plat/s3c64xx-spi.h>
|
|
|
|
#include <mach/crag6410.h>
|
|
|
|
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
|
|
.set_level = gpio_set_value,
|
|
.line = S3C64XX_GPC(3),
|
|
};
|
|
|
|
static struct spi_board_info wm1253_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm0010",
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
.controller_data = &wm0010_spi_csinfo,
|
|
},
|
|
};
|
|
|
|
static struct wm5100_pdata wm5100_pdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
|
|
.in_mode = {
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_SE,
|
|
},
|
|
|
|
.hp_pol = CODEC_GPIO_BASE + 3,
|
|
.jack_modes = {
|
|
{ WM5100_MICDET_MICBIAS3, 0, 0 },
|
|
{ WM5100_MICDET_MICBIAS2, 1, 1 },
|
|
},
|
|
|
|
.gpio_defaults = {
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0x2, /* IRQ: CMOS output */
|
|
0x3, /* CLKOUT: CMOS output */
|
|
},
|
|
};
|
|
|
|
static struct wm8996_retune_mobile_config wm8996_retune[] = {
|
|
{
|
|
.name = "Sub LPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
{
|
|
.name = "Sub HPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct wm8996_pdata wm8996_pdata __initdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.micdet_def = 1,
|
|
.inl_mode = WM8996_DIFFERRENTIAL_1,
|
|
.inr_mode = WM8996_DIFFERRENTIAL_1,
|
|
|
|
.irq_flags = IRQF_TRIGGER_RISING,
|
|
|
|
.gpio_default = {
|
|
0x8001, /* GPIO1 == ADCLRCLK1 */
|
|
0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
|
|
0x0141, /* GPIO3 == HP_SEL */
|
|
0x0002, /* GPIO4 == IRQ */
|
|
0x020e, /* GPIO5 == CLKOUT */
|
|
},
|
|
|
|
.retune_mobile_cfgs = wm8996_retune,
|
|
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
|
|
};
|
|
|
|
static struct wm8962_pdata wm8962_pdata __initdata = {
|
|
.gpio_init = {
|
|
0,
|
|
WM8962_GPIO_FN_OPCLK,
|
|
WM8962_GPIO_FN_DMICCLK,
|
|
0,
|
|
0x8000 | WM8962_GPIO_FN_DMICDAT,
|
|
WM8962_GPIO_FN_IRQ, /* Open drain mode */
|
|
},
|
|
};
|
|
|
|
static struct wm9081_pdata wm9081_pdata __initdata = {
|
|
.irq_high = false,
|
|
.irq_cmos = false,
|
|
};
|
|
|
|
static const struct i2c_board_info wm1254_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8996", 0x1a),
|
|
.platform_data = &wm8996_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1255_devs[] = {
|
|
{ I2C_BOARD_INFO("wm5100", 0x1a),
|
|
.platform_data = &wm5100_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1259_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8962", 0x1a),
|
|
.platform_data = &wm8962_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
};
|
|
|
|
static struct wm8994_pdata wm8994_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.gpio_defaults = {
|
|
0x3, /* IRQ out, active high, CMOS */
|
|
},
|
|
.irq_base = CODEC_IRQ_BASE,
|
|
.ldo = {
|
|
{ .supply = "WALLVDD" },
|
|
{ .supply = "WALLVDD" },
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm1277_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
|
|
.platform_data = &wm8994_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
};
|
|
|
|
static __devinitdata const struct {
|
|
u8 id;
|
|
const char *name;
|
|
const struct i2c_board_info *i2c_devs;
|
|
int num_i2c_devs;
|
|
const struct spi_board_info *spi_devs;
|
|
int num_spi_devs;
|
|
} gf_mods[] = {
|
|
{ .id = 0x01, .name = "1250-EV1 Springbank" },
|
|
{ .id = 0x02, .name = "1251-EV1 Jura" },
|
|
{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
|
|
{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
|
|
{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
|
|
{ .id = 0x15, .name = "XXXX-EV1 Bells" },
|
|
{ .id = 0x21, .name = "1275-EV1 Mortlach" },
|
|
{ .id = 0x25, .name = "1274-EV1 Glencadam" },
|
|
{ .id = 0x31, .name = "1253-EV1 Tomatin",
|
|
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
|
|
{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
|
|
{ .id = 0x33, .name = "XXXX-EV1 Oban" },
|
|
{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
|
|
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
|
|
{ .id = 0x3a, .name = "1259-EV1 Tobermory",
|
|
.i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
|
|
{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
|
|
.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
|
|
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
|
|
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
|
|
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
|
|
};
|
|
|
|
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
int ret, i, j, id, rev;
|
|
|
|
ret = i2c_smbus_read_byte_data(i2c, 0);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
id = (ret & 0xfe) >> 2;
|
|
rev = ret & 0x3;
|
|
for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
|
|
if (id == gf_mods[i].id)
|
|
break;
|
|
|
|
if (i < ARRAY_SIZE(gf_mods)) {
|
|
dev_info(&i2c->dev, "%s revision %d\n",
|
|
gf_mods[i].name, rev + 1);
|
|
|
|
for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
|
|
if (!i2c_new_device(i2c->adapter,
|
|
&(gf_mods[i].i2c_devs[j])))
|
|
dev_err(&i2c->dev,
|
|
"Failed to register dev: %d\n", ret);
|
|
}
|
|
|
|
spi_register_board_info(gf_mods[i].spi_devs,
|
|
gf_mods[i].num_spi_devs);
|
|
} else {
|
|
dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
|
|
id, rev + 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wlf_gf_module_id[] = {
|
|
{ "wlf-gf-module", 0 },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver wlf_gf_module_driver = {
|
|
.driver = {
|
|
.name = "wlf-gf-module",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wlf_gf_module_probe,
|
|
.id_table = wlf_gf_module_id,
|
|
};
|
|
|
|
static int __init wlf_gf_module_register(void)
|
|
{
|
|
return i2c_add_driver(&wlf_gf_module_driver);
|
|
}
|
|
module_init(wlf_gf_module_register);
|