iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f905bc6883
linux/drivers/usb/musb
History
George Cherian f905bc6883 usb: musb: core: Disable the Interrupts till BABBLE is fully handled 
Disable the MUSB interrupts till MUSB is recovered fully from BABBLE
condition. There are chances that we could get multiple interrupts
till the time the babble recover work gets scheduled. Sometimes
this could even end up in an endless loop making MUSB itself unusable.

Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-18 09:55:31 -06:00
..
am35x.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
blackfin.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
blackfin.h
cppi_dma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
cppi_dma.h
da8xx.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
davinci.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
davinci.h
jz4740.c usb: musb: register nop transceiver driver for jz4740 2014-07-10 08:36:50 -05:00
Kconfig usb: musb: omap2plus bus glue needs USB host support 2014-05-14 09:23:32 -05:00
Makefile usb: musb: add support for JZ4740 usb device controller 2013-12-20 09:53:24 -06:00
musb_am335x.c usb: musb: Fix panic upon musb_am335x module removal 2014-06-27 10:53:06 -05:00
musb_core.c usb: musb: core: Disable the Interrupts till BABBLE is fully handled 2014-11-18 09:55:31 -06:00
musb_core.h usb: musb: try a race-free wakeup 2014-11-05 13:26:41 -06:00
musb_cppi41.c usb: musb: musb_cppi41: recognize HS devices in hostmode 2014-11-18 09:35:14 -06:00
musb_debug.h
musb_debugfs.c usb: musb: replace hard coded registers with defines 2014-11-18 09:35:12 -06:00
musb_dma.h usb: musb: introduce dma_channel.rx_packet_done 2014-06-30 14:26:24 -05:00
musb_dsps.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
musb_gadget_ep0.c usb: musb: gadget: read ep0 fifo only if rxcount is non zero 2013-04-02 11:42:50 +03:00
musb_gadget.c usb: musb: gadget: use udc-core's reset notifier 2014-11-10 17:19:34 -06:00
musb_gadget.h usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes 2013-05-28 19:22:23 +03:00
musb_host.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
musb_host.h usb: musb: fix prototype for musb_port_reset 2013-12-20 15:05:43 -06:00
musb_io.h usb: musb: use io{read,write}*_rep accessors 2012-12-17 17:15:13 -08:00
musb_regs.h usb: Fixed a few typos 2014-09-23 22:15:18 -07:00
musb_virthub.c usb: musb: try a race-free wakeup 2014-11-05 13:26:41 -06:00
musbhsdma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
musbhsdma.h usb: musb: remove generic_interrupt 2012-11-06 15:32:13 +02:00
omap2430.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
omap2430.h usb: start using the control module driver 2013-01-25 12:27:24 +02:00
tusb6010_omap.c usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. 2014-05-16 12:16:31 -05:00
tusb6010.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
tusb6010.h usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. 2014-05-16 12:16:31 -05:00
ux500_dma.c usb: musb: ux500_dma: use dmaengine_xxx() APIs 2014-11-03 10:01:07 -06:00
ux500.c usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00