f9b4045d6b
Since 404849bbd2 we've been using
LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked.
This can explode if we take the decrementer interrupt while we're in a module,
because the toc pointer in r2 will be the module's toc pointer.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2045 lines
52 KiB
ArmAsm
2045 lines
52 KiB
ArmAsm
/*
|
|
* arch/ppc64/kernel/head.S
|
|
*
|
|
* PowerPC version
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
|
|
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
|
|
* Adapted for Power Macintosh by Paul Mackerras.
|
|
* Low-level exception handlers and MMU support
|
|
* rewritten by Paul Mackerras.
|
|
* Copyright (C) 1996 Paul Mackerras.
|
|
*
|
|
* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
|
|
* Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
|
|
*
|
|
* This file contains the low-level support and setup for the
|
|
* PowerPC-64 platform, including trap and interrupt dispatch.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/threads.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/page.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/bug.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/hvcall.h>
|
|
#include <asm/iseries/lpar_map.h>
|
|
#include <asm/thread_info.h>
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
#define DO_SOFT_DISABLE
|
|
#endif
|
|
|
|
/*
|
|
* We layout physical memory as follows:
|
|
* 0x0000 - 0x00ff : Secondary processor spin code
|
|
* 0x0100 - 0x2fff : pSeries Interrupt prologs
|
|
* 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
|
|
* 0x6000 - 0x6fff : Initial (CPU0) segment table
|
|
* 0x7000 - 0x7fff : FWNMI data area
|
|
* 0x8000 - : Early init and support code
|
|
*/
|
|
|
|
/*
|
|
* SPRG Usage
|
|
*
|
|
* Register Definition
|
|
*
|
|
* SPRG0 reserved for hypervisor
|
|
* SPRG1 temp - used to save gpr
|
|
* SPRG2 temp - used to save gpr
|
|
* SPRG3 virt addr of paca
|
|
*/
|
|
|
|
/*
|
|
* Entering into this code we make the following assumptions:
|
|
* For pSeries:
|
|
* 1. The MMU is off & open firmware is running in real mode.
|
|
* 2. The kernel is entered at __start
|
|
*
|
|
* For iSeries:
|
|
* 1. The MMU is on (as it always is for iSeries)
|
|
* 2. The kernel is entered at system_reset_iSeries
|
|
*/
|
|
|
|
.text
|
|
.globl _stext
|
|
_stext:
|
|
#ifdef CONFIG_PPC_MULTIPLATFORM
|
|
_GLOBAL(__start)
|
|
/* NOP this out unconditionally */
|
|
BEGIN_FTR_SECTION
|
|
b .__start_initialization_multiplatform
|
|
END_FTR_SECTION(0, 1)
|
|
#endif /* CONFIG_PPC_MULTIPLATFORM */
|
|
|
|
/* Catch branch to 0 in real mode */
|
|
trap
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
/*
|
|
* At offset 0x20, there is a pointer to iSeries LPAR data.
|
|
* This is required by the hypervisor
|
|
*/
|
|
. = 0x20
|
|
.llong hvReleaseData-KERNELBASE
|
|
|
|
/*
|
|
* At offset 0x28 and 0x30 are offsets to the mschunks_map
|
|
* array (used by the iSeries LPAR debugger to do translation
|
|
* between physical addresses and absolute addresses) and
|
|
* to the pidhash table (also used by the debugger)
|
|
*/
|
|
.llong mschunks_map-KERNELBASE
|
|
.llong 0 /* pidhash-KERNELBASE SFRXXX */
|
|
|
|
/* Offset 0x38 - Pointer to start of embedded System.map */
|
|
.globl embedded_sysmap_start
|
|
embedded_sysmap_start:
|
|
.llong 0
|
|
/* Offset 0x40 - Pointer to end of embedded System.map */
|
|
.globl embedded_sysmap_end
|
|
embedded_sysmap_end:
|
|
.llong 0
|
|
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
/* Secondary processors spin on this value until it goes to 1. */
|
|
.globl __secondary_hold_spinloop
|
|
__secondary_hold_spinloop:
|
|
.llong 0x0
|
|
|
|
/* Secondary processors write this value with their cpu # */
|
|
/* after they enter the spin loop immediately below. */
|
|
.globl __secondary_hold_acknowledge
|
|
__secondary_hold_acknowledge:
|
|
.llong 0x0
|
|
|
|
. = 0x60
|
|
/*
|
|
* The following code is used on pSeries to hold secondary processors
|
|
* in a spin loop after they have been freed from OpenFirmware, but
|
|
* before the bulk of the kernel has been relocated. This code
|
|
* is relocated to physical address 0x60 before prom_init is run.
|
|
* All of it must fit below the first exception vector at 0x100.
|
|
*/
|
|
_GLOBAL(__secondary_hold)
|
|
mfmsr r24
|
|
ori r24,r24,MSR_RI
|
|
mtmsrd r24 /* RI on */
|
|
|
|
/* Grab our linux cpu number */
|
|
mr r24,r3
|
|
|
|
/* Tell the master cpu we're here */
|
|
/* Relocation is off & we are located at an address less */
|
|
/* than 0x100, so only need to grab low order offset. */
|
|
std r24,__secondary_hold_acknowledge@l(0)
|
|
sync
|
|
|
|
/* All secondary cpus wait here until told to start. */
|
|
100: ld r4,__secondary_hold_spinloop@l(0)
|
|
cmpdi 0,r4,1
|
|
bne 100b
|
|
|
|
#ifdef CONFIG_HMT
|
|
SET_REG_IMMEDIATE(r4, .hmt_init)
|
|
mtctr r4
|
|
bctr
|
|
#else
|
|
#ifdef CONFIG_SMP
|
|
LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init)
|
|
mtctr r4
|
|
mr r3,r24
|
|
bctr
|
|
#else
|
|
BUG_OPCODE
|
|
#endif
|
|
#endif
|
|
|
|
/* This value is used to mark exception frames on the stack. */
|
|
.section ".toc","aw"
|
|
exception_marker:
|
|
.tc ID_72656773_68657265[TC],0x7265677368657265
|
|
.text
|
|
|
|
/*
|
|
* The following macros define the code that appears as
|
|
* the prologue to each of the exception handlers. They
|
|
* are split into two parts to allow a single kernel binary
|
|
* to be used for pSeries and iSeries.
|
|
* LOL. One day... - paulus
|
|
*/
|
|
|
|
/*
|
|
* We make as much of the exception code common between native
|
|
* exception handlers (including pSeries LPAR) and iSeries LPAR
|
|
* implementations as possible.
|
|
*/
|
|
|
|
/*
|
|
* This is the start of the interrupt handlers for pSeries
|
|
* This code runs with relocation off.
|
|
*/
|
|
#define EX_R9 0
|
|
#define EX_R10 8
|
|
#define EX_R11 16
|
|
#define EX_R12 24
|
|
#define EX_R13 32
|
|
#define EX_SRR0 40
|
|
#define EX_DAR 48
|
|
#define EX_DSISR 56
|
|
#define EX_CCR 60
|
|
#define EX_R3 64
|
|
#define EX_LR 72
|
|
|
|
/*
|
|
* We're short on space and time in the exception prolog, so we can't
|
|
* use the normal SET_REG_IMMEDIATE macro. Normally we just need the
|
|
* low halfword of the address, but for Kdump we need the whole low
|
|
* word.
|
|
*/
|
|
#ifdef CONFIG_CRASH_DUMP
|
|
#define LOAD_HANDLER(reg, label) \
|
|
oris reg,reg,(label)@h; /* virt addr of handler ... */ \
|
|
ori reg,reg,(label)@l; /* .. and the rest */
|
|
#else
|
|
#define LOAD_HANDLER(reg, label) \
|
|
ori reg,reg,(label)@l; /* virt addr of handler ... */
|
|
#endif
|
|
|
|
#define EXCEPTION_PROLOG_PSERIES(area, label) \
|
|
mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
|
|
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
|
|
std r10,area+EX_R10(r13); \
|
|
std r11,area+EX_R11(r13); \
|
|
std r12,area+EX_R12(r13); \
|
|
mfspr r9,SPRN_SPRG1; \
|
|
std r9,area+EX_R13(r13); \
|
|
mfcr r9; \
|
|
clrrdi r12,r13,32; /* get high part of &label */ \
|
|
mfmsr r10; \
|
|
mfspr r11,SPRN_SRR0; /* save SRR0 */ \
|
|
LOAD_HANDLER(r12,label) \
|
|
ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
|
|
mtspr SPRN_SRR0,r12; \
|
|
mfspr r12,SPRN_SRR1; /* and SRR1 */ \
|
|
mtspr SPRN_SRR1,r10; \
|
|
rfid; \
|
|
b . /* prevent speculative execution */
|
|
|
|
/*
|
|
* This is the start of the interrupt handlers for iSeries
|
|
* This code runs with relocation on.
|
|
*/
|
|
#define EXCEPTION_PROLOG_ISERIES_1(area) \
|
|
mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
|
|
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
|
|
std r10,area+EX_R10(r13); \
|
|
std r11,area+EX_R11(r13); \
|
|
std r12,area+EX_R12(r13); \
|
|
mfspr r9,SPRN_SPRG1; \
|
|
std r9,area+EX_R13(r13); \
|
|
mfcr r9
|
|
|
|
#define EXCEPTION_PROLOG_ISERIES_2 \
|
|
mfmsr r10; \
|
|
ld r12,PACALPPACAPTR(r13); \
|
|
ld r11,LPPACASRR0(r12); \
|
|
ld r12,LPPACASRR1(r12); \
|
|
ori r10,r10,MSR_RI; \
|
|
mtmsrd r10,1
|
|
|
|
/*
|
|
* The common exception prolog is used for all except a few exceptions
|
|
* such as a segment miss on a kernel address. We have to be prepared
|
|
* to take another exception from the point where we first touch the
|
|
* kernel stack onwards.
|
|
*
|
|
* On entry r13 points to the paca, r9-r13 are saved in the paca,
|
|
* r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
|
|
* SRR1, and relocation is on.
|
|
*/
|
|
#define EXCEPTION_PROLOG_COMMON(n, area) \
|
|
andi. r10,r12,MSR_PR; /* See if coming from user */ \
|
|
mr r10,r1; /* Save r1 */ \
|
|
subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
|
|
beq- 1f; \
|
|
ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
|
|
1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
|
|
bge- cr1,bad_stack; /* abort if it is */ \
|
|
std r9,_CCR(r1); /* save CR in stackframe */ \
|
|
std r11,_NIP(r1); /* save SRR0 in stackframe */ \
|
|
std r12,_MSR(r1); /* save SRR1 in stackframe */ \
|
|
std r10,0(r1); /* make stack chain pointer */ \
|
|
std r0,GPR0(r1); /* save r0 in stackframe */ \
|
|
std r10,GPR1(r1); /* save r1 in stackframe */ \
|
|
std r2,GPR2(r1); /* save r2 in stackframe */ \
|
|
SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
|
|
SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
|
|
ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
|
|
ld r10,area+EX_R10(r13); \
|
|
std r9,GPR9(r1); \
|
|
std r10,GPR10(r1); \
|
|
ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
|
|
ld r10,area+EX_R12(r13); \
|
|
ld r11,area+EX_R13(r13); \
|
|
std r9,GPR11(r1); \
|
|
std r10,GPR12(r1); \
|
|
std r11,GPR13(r1); \
|
|
ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
|
|
mflr r9; /* save LR in stackframe */ \
|
|
std r9,_LINK(r1); \
|
|
mfctr r10; /* save CTR in stackframe */ \
|
|
std r10,_CTR(r1); \
|
|
mfspr r11,SPRN_XER; /* save XER in stackframe */ \
|
|
std r11,_XER(r1); \
|
|
li r9,(n)+1; \
|
|
std r9,_TRAP(r1); /* set trap number */ \
|
|
li r10,0; \
|
|
ld r11,exception_marker@toc(r2); \
|
|
std r10,RESULT(r1); /* clear regs->result */ \
|
|
std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
|
|
|
|
/*
|
|
* Exception vectors.
|
|
*/
|
|
#define STD_EXCEPTION_PSERIES(n, label) \
|
|
. = n; \
|
|
.globl label##_pSeries; \
|
|
label##_pSeries: \
|
|
HMT_MEDIUM; \
|
|
mtspr SPRN_SPRG1,r13; /* save r13 */ \
|
|
RUNLATCH_ON(r13); \
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
|
|
|
|
#define STD_EXCEPTION_ISERIES(n, label, area) \
|
|
.globl label##_iSeries; \
|
|
label##_iSeries: \
|
|
HMT_MEDIUM; \
|
|
mtspr SPRN_SPRG1,r13; /* save r13 */ \
|
|
RUNLATCH_ON(r13); \
|
|
EXCEPTION_PROLOG_ISERIES_1(area); \
|
|
EXCEPTION_PROLOG_ISERIES_2; \
|
|
b label##_common
|
|
|
|
#define MASKABLE_EXCEPTION_ISERIES(n, label) \
|
|
.globl label##_iSeries; \
|
|
label##_iSeries: \
|
|
HMT_MEDIUM; \
|
|
mtspr SPRN_SPRG1,r13; /* save r13 */ \
|
|
RUNLATCH_ON(r13); \
|
|
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
|
|
lbz r10,PACAPROCENABLED(r13); \
|
|
cmpwi 0,r10,0; \
|
|
beq- label##_iSeries_masked; \
|
|
EXCEPTION_PROLOG_ISERIES_2; \
|
|
b label##_common; \
|
|
|
|
#ifdef DO_SOFT_DISABLE
|
|
#define DISABLE_INTS \
|
|
lbz r10,PACAPROCENABLED(r13); \
|
|
li r11,0; \
|
|
std r10,SOFTE(r1); \
|
|
mfmsr r10; \
|
|
stb r11,PACAPROCENABLED(r13); \
|
|
ori r10,r10,MSR_EE; \
|
|
mtmsrd r10,1
|
|
|
|
#define ENABLE_INTS \
|
|
lbz r10,PACAPROCENABLED(r13); \
|
|
mfmsr r11; \
|
|
std r10,SOFTE(r1); \
|
|
ori r11,r11,MSR_EE; \
|
|
mtmsrd r11,1
|
|
|
|
#else /* hard enable/disable interrupts */
|
|
#define DISABLE_INTS
|
|
|
|
#define ENABLE_INTS \
|
|
ld r12,_MSR(r1); \
|
|
mfmsr r11; \
|
|
rlwimi r11,r12,0,MSR_EE; \
|
|
mtmsrd r11,1
|
|
|
|
#endif
|
|
|
|
#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
|
|
.align 7; \
|
|
.globl label##_common; \
|
|
label##_common: \
|
|
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
|
|
DISABLE_INTS; \
|
|
bl .save_nvgprs; \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
bl hdlr; \
|
|
b .ret_from_except
|
|
|
|
#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
|
|
.align 7; \
|
|
.globl label##_common; \
|
|
label##_common: \
|
|
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
|
|
DISABLE_INTS; \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
bl hdlr; \
|
|
b .ret_from_except_lite
|
|
|
|
/*
|
|
* Start of pSeries system interrupt routines
|
|
*/
|
|
. = 0x100
|
|
.globl __start_interrupts
|
|
__start_interrupts:
|
|
|
|
STD_EXCEPTION_PSERIES(0x100, system_reset)
|
|
|
|
. = 0x200
|
|
_machine_check_pSeries:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13 /* save r13 */
|
|
RUNLATCH_ON(r13)
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
|
|
|
|
. = 0x300
|
|
.globl data_access_pSeries
|
|
data_access_pSeries:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13
|
|
BEGIN_FTR_SECTION
|
|
mtspr SPRN_SPRG2,r12
|
|
mfspr r13,SPRN_DAR
|
|
mfspr r12,SPRN_DSISR
|
|
srdi r13,r13,60
|
|
rlwimi r13,r12,16,0x20
|
|
mfcr r12
|
|
cmpwi r13,0x2c
|
|
beq .do_stab_bolted_pSeries
|
|
mtcrf 0x80,r12
|
|
mfspr r12,SPRN_SPRG2
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
|
|
|
|
. = 0x380
|
|
.globl data_access_slb_pSeries
|
|
data_access_slb_pSeries:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13
|
|
RUNLATCH_ON(r13)
|
|
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_DAR
|
|
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
|
|
mfcr r9
|
|
#ifdef __DISABLED__
|
|
/* Keep that around for when we re-implement dynamic VSIDs */
|
|
cmpdi r3,0
|
|
bge slb_miss_user_pseries
|
|
#endif /* __DISABLED__ */
|
|
std r10,PACA_EXSLB+EX_R10(r13)
|
|
std r11,PACA_EXSLB+EX_R11(r13)
|
|
std r12,PACA_EXSLB+EX_R12(r13)
|
|
mfspr r10,SPRN_SPRG1
|
|
std r10,PACA_EXSLB+EX_R13(r13)
|
|
mfspr r12,SPRN_SRR1 /* and SRR1 */
|
|
b .slb_miss_realmode /* Rel. branch works in real mode */
|
|
|
|
STD_EXCEPTION_PSERIES(0x400, instruction_access)
|
|
|
|
. = 0x480
|
|
.globl instruction_access_slb_pSeries
|
|
instruction_access_slb_pSeries:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13
|
|
RUNLATCH_ON(r13)
|
|
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
|
|
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
|
|
mfcr r9
|
|
#ifdef __DISABLED__
|
|
/* Keep that around for when we re-implement dynamic VSIDs */
|
|
cmpdi r3,0
|
|
bge slb_miss_user_pseries
|
|
#endif /* __DISABLED__ */
|
|
std r10,PACA_EXSLB+EX_R10(r13)
|
|
std r11,PACA_EXSLB+EX_R11(r13)
|
|
std r12,PACA_EXSLB+EX_R12(r13)
|
|
mfspr r10,SPRN_SPRG1
|
|
std r10,PACA_EXSLB+EX_R13(r13)
|
|
mfspr r12,SPRN_SRR1 /* and SRR1 */
|
|
b .slb_miss_realmode /* Rel. branch works in real mode */
|
|
|
|
STD_EXCEPTION_PSERIES(0x500, hardware_interrupt)
|
|
STD_EXCEPTION_PSERIES(0x600, alignment)
|
|
STD_EXCEPTION_PSERIES(0x700, program_check)
|
|
STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
|
|
STD_EXCEPTION_PSERIES(0x900, decrementer)
|
|
STD_EXCEPTION_PSERIES(0xa00, trap_0a)
|
|
STD_EXCEPTION_PSERIES(0xb00, trap_0b)
|
|
|
|
. = 0xc00
|
|
.globl system_call_pSeries
|
|
system_call_pSeries:
|
|
HMT_MEDIUM
|
|
RUNLATCH_ON(r9)
|
|
mr r9,r13
|
|
mfmsr r10
|
|
mfspr r13,SPRN_SPRG3
|
|
mfspr r11,SPRN_SRR0
|
|
clrrdi r12,r13,32
|
|
oris r12,r12,system_call_common@h
|
|
ori r12,r12,system_call_common@l
|
|
mtspr SPRN_SRR0,r12
|
|
ori r10,r10,MSR_IR|MSR_DR|MSR_RI
|
|
mfspr r12,SPRN_SRR1
|
|
mtspr SPRN_SRR1,r10
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
STD_EXCEPTION_PSERIES(0xd00, single_step)
|
|
STD_EXCEPTION_PSERIES(0xe00, trap_0e)
|
|
|
|
/* We need to deal with the Altivec unavailable exception
|
|
* here which is at 0xf20, thus in the middle of the
|
|
* prolog code of the PerformanceMonitor one. A little
|
|
* trickery is thus necessary
|
|
*/
|
|
. = 0xf00
|
|
b performance_monitor_pSeries
|
|
|
|
STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
|
|
|
|
STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
|
|
STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
|
|
|
|
. = 0x3000
|
|
|
|
/*** pSeries interrupt support ***/
|
|
|
|
/* moved from 0xf00 */
|
|
STD_EXCEPTION_PSERIES(., performance_monitor)
|
|
|
|
.align 7
|
|
_GLOBAL(do_stab_bolted_pSeries)
|
|
mtcrf 0x80,r12
|
|
mfspr r12,SPRN_SPRG2
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
|
|
|
|
/*
|
|
* We have some room here we use that to put
|
|
* the peries slb miss user trampoline code so it's reasonably
|
|
* away from slb_miss_user_common to avoid problems with rfid
|
|
*
|
|
* This is used for when the SLB miss handler has to go virtual,
|
|
* which doesn't happen for now anymore but will once we re-implement
|
|
* dynamic VSIDs for shared page tables
|
|
*/
|
|
#ifdef __DISABLED__
|
|
slb_miss_user_pseries:
|
|
std r10,PACA_EXGEN+EX_R10(r13)
|
|
std r11,PACA_EXGEN+EX_R11(r13)
|
|
std r12,PACA_EXGEN+EX_R12(r13)
|
|
mfspr r10,SPRG1
|
|
ld r11,PACA_EXSLB+EX_R9(r13)
|
|
ld r12,PACA_EXSLB+EX_R3(r13)
|
|
std r10,PACA_EXGEN+EX_R13(r13)
|
|
std r11,PACA_EXGEN+EX_R9(r13)
|
|
std r12,PACA_EXGEN+EX_R3(r13)
|
|
clrrdi r12,r13,32
|
|
mfmsr r10
|
|
mfspr r11,SRR0 /* save SRR0 */
|
|
ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
|
|
ori r10,r10,MSR_IR|MSR_DR|MSR_RI
|
|
mtspr SRR0,r12
|
|
mfspr r12,SRR1 /* and SRR1 */
|
|
mtspr SRR1,r10
|
|
rfid
|
|
b . /* prevent spec. execution */
|
|
#endif /* __DISABLED__ */
|
|
|
|
/*
|
|
* Vectors for the FWNMI option. Share common code.
|
|
*/
|
|
.globl system_reset_fwnmi
|
|
.align 7
|
|
system_reset_fwnmi:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13 /* save r13 */
|
|
RUNLATCH_ON(r13)
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
|
|
|
|
.globl machine_check_fwnmi
|
|
.align 7
|
|
machine_check_fwnmi:
|
|
HMT_MEDIUM
|
|
mtspr SPRN_SPRG1,r13 /* save r13 */
|
|
RUNLATCH_ON(r13)
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
/*** ISeries-LPAR interrupt handlers ***/
|
|
|
|
STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC)
|
|
|
|
.globl data_access_iSeries
|
|
data_access_iSeries:
|
|
mtspr SPRN_SPRG1,r13
|
|
BEGIN_FTR_SECTION
|
|
mtspr SPRN_SPRG2,r12
|
|
mfspr r13,SPRN_DAR
|
|
mfspr r12,SPRN_DSISR
|
|
srdi r13,r13,60
|
|
rlwimi r13,r12,16,0x20
|
|
mfcr r12
|
|
cmpwi r13,0x2c
|
|
beq .do_stab_bolted_iSeries
|
|
mtcrf 0x80,r12
|
|
mfspr r12,SPRN_SPRG2
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
|
|
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN)
|
|
EXCEPTION_PROLOG_ISERIES_2
|
|
b data_access_common
|
|
|
|
.do_stab_bolted_iSeries:
|
|
mtcrf 0x80,r12
|
|
mfspr r12,SPRN_SPRG2
|
|
EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
|
|
EXCEPTION_PROLOG_ISERIES_2
|
|
b .do_stab_bolted
|
|
|
|
.globl data_access_slb_iSeries
|
|
data_access_slb_iSeries:
|
|
mtspr SPRN_SPRG1,r13 /* save r13 */
|
|
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_DAR
|
|
std r9,PACA_EXSLB+EX_R9(r13)
|
|
mfcr r9
|
|
#ifdef __DISABLED__
|
|
cmpdi r3,0
|
|
bge slb_miss_user_iseries
|
|
#endif
|
|
std r10,PACA_EXSLB+EX_R10(r13)
|
|
std r11,PACA_EXSLB+EX_R11(r13)
|
|
std r12,PACA_EXSLB+EX_R12(r13)
|
|
mfspr r10,SPRN_SPRG1
|
|
std r10,PACA_EXSLB+EX_R13(r13)
|
|
ld r12,PACALPPACAPTR(r13)
|
|
ld r12,LPPACASRR1(r12)
|
|
b .slb_miss_realmode
|
|
|
|
STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN)
|
|
|
|
.globl instruction_access_slb_iSeries
|
|
instruction_access_slb_iSeries:
|
|
mtspr SPRN_SPRG1,r13 /* save r13 */
|
|
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
ld r3,PACALPPACAPTR(r13)
|
|
ld r3,LPPACASRR0(r3) /* get SRR0 value */
|
|
std r9,PACA_EXSLB+EX_R9(r13)
|
|
mfcr r9
|
|
#ifdef __DISABLED__
|
|
cmpdi r3,0
|
|
bge .slb_miss_user_iseries
|
|
#endif
|
|
std r10,PACA_EXSLB+EX_R10(r13)
|
|
std r11,PACA_EXSLB+EX_R11(r13)
|
|
std r12,PACA_EXSLB+EX_R12(r13)
|
|
mfspr r10,SPRN_SPRG1
|
|
std r10,PACA_EXSLB+EX_R13(r13)
|
|
ld r12,PACALPPACAPTR(r13)
|
|
ld r12,LPPACASRR1(r12)
|
|
b .slb_miss_realmode
|
|
|
|
#ifdef __DISABLED__
|
|
slb_miss_user_iseries:
|
|
std r10,PACA_EXGEN+EX_R10(r13)
|
|
std r11,PACA_EXGEN+EX_R11(r13)
|
|
std r12,PACA_EXGEN+EX_R12(r13)
|
|
mfspr r10,SPRG1
|
|
ld r11,PACA_EXSLB+EX_R9(r13)
|
|
ld r12,PACA_EXSLB+EX_R3(r13)
|
|
std r10,PACA_EXGEN+EX_R13(r13)
|
|
std r11,PACA_EXGEN+EX_R9(r13)
|
|
std r12,PACA_EXGEN+EX_R3(r13)
|
|
EXCEPTION_PROLOG_ISERIES_2
|
|
b slb_miss_user_common
|
|
#endif
|
|
|
|
MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt)
|
|
STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN)
|
|
STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN)
|
|
STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN)
|
|
MASKABLE_EXCEPTION_ISERIES(0x900, decrementer)
|
|
STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN)
|
|
STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN)
|
|
|
|
.globl system_call_iSeries
|
|
system_call_iSeries:
|
|
mr r9,r13
|
|
mfspr r13,SPRN_SPRG3
|
|
EXCEPTION_PROLOG_ISERIES_2
|
|
b system_call_common
|
|
|
|
STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN)
|
|
STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN)
|
|
STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN)
|
|
|
|
.globl system_reset_iSeries
|
|
system_reset_iSeries:
|
|
mfspr r13,SPRN_SPRG3 /* Get paca address */
|
|
mfmsr r24
|
|
ori r24,r24,MSR_RI
|
|
mtmsrd r24 /* RI on */
|
|
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
|
|
cmpwi 0,r24,0 /* Are we processor 0? */
|
|
beq .__start_initialization_iSeries /* Start up the first processor */
|
|
mfspr r4,SPRN_CTRLF
|
|
li r5,CTRL_RUNLATCH /* Turn off the run light */
|
|
andc r4,r4,r5
|
|
mtspr SPRN_CTRLT,r4
|
|
|
|
1:
|
|
HMT_LOW
|
|
#ifdef CONFIG_SMP
|
|
lbz r23,PACAPROCSTART(r13) /* Test if this processor
|
|
* should start */
|
|
sync
|
|
LOAD_REG_IMMEDIATE(r3,current_set)
|
|
sldi r28,r24,3 /* get current_set[cpu#] */
|
|
ldx r3,r3,r28
|
|
addi r1,r3,THREAD_SIZE
|
|
subi r1,r1,STACK_FRAME_OVERHEAD
|
|
|
|
cmpwi 0,r23,0
|
|
beq iSeries_secondary_smp_loop /* Loop until told to go */
|
|
bne .__secondary_start /* Loop until told to go */
|
|
iSeries_secondary_smp_loop:
|
|
/* Let the Hypervisor know we are alive */
|
|
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
|
|
lis r3,0x8002
|
|
rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
|
|
#else /* CONFIG_SMP */
|
|
/* Yield the processor. This is required for non-SMP kernels
|
|
which are running on multi-threaded machines. */
|
|
lis r3,0x8000
|
|
rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
|
|
addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
|
|
li r4,0 /* "yield timed" */
|
|
li r5,-1 /* "yield forever" */
|
|
#endif /* CONFIG_SMP */
|
|
li r0,-1 /* r0=-1 indicates a Hypervisor call */
|
|
sc /* Invoke the hypervisor via a system call */
|
|
mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */
|
|
b 1b /* If SMP not configured, secondaries
|
|
* loop forever */
|
|
|
|
.globl decrementer_iSeries_masked
|
|
decrementer_iSeries_masked:
|
|
/* We may not have a valid TOC pointer in here. */
|
|
li r11,1
|
|
ld r12,PACALPPACAPTR(r13)
|
|
stb r11,LPPACADECRINT(r12)
|
|
LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy)
|
|
lwz r12,0(r12)
|
|
mtspr SPRN_DEC,r12
|
|
/* fall through */
|
|
|
|
.globl hardware_interrupt_iSeries_masked
|
|
hardware_interrupt_iSeries_masked:
|
|
mtcrf 0x80,r9 /* Restore regs */
|
|
ld r12,PACALPPACAPTR(r13)
|
|
ld r11,LPPACASRR0(r12)
|
|
ld r12,LPPACASRR1(r12)
|
|
mtspr SPRN_SRR0,r11
|
|
mtspr SPRN_SRR1,r12
|
|
ld r9,PACA_EXGEN+EX_R9(r13)
|
|
ld r10,PACA_EXGEN+EX_R10(r13)
|
|
ld r11,PACA_EXGEN+EX_R11(r13)
|
|
ld r12,PACA_EXGEN+EX_R12(r13)
|
|
ld r13,PACA_EXGEN+EX_R13(r13)
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
/*** Common interrupt handlers ***/
|
|
|
|
STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
|
|
|
|
/*
|
|
* Machine check is different because we use a different
|
|
* save area: PACA_EXMC instead of PACA_EXGEN.
|
|
*/
|
|
.align 7
|
|
.globl machine_check_common
|
|
machine_check_common:
|
|
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
|
|
DISABLE_INTS
|
|
bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .machine_check_exception
|
|
b .ret_from_except
|
|
|
|
STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
|
|
STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
|
|
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
|
|
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
|
|
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
|
|
STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
|
|
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
|
|
#ifdef CONFIG_ALTIVEC
|
|
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
|
|
#else
|
|
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
|
|
#endif
|
|
|
|
/*
|
|
* Here we have detected that the kernel stack pointer is bad.
|
|
* R9 contains the saved CR, r13 points to the paca,
|
|
* r10 contains the (bad) kernel stack pointer,
|
|
* r11 and r12 contain the saved SRR0 and SRR1.
|
|
* We switch to using an emergency stack, save the registers there,
|
|
* and call kernel_bad_stack(), which panics.
|
|
*/
|
|
bad_stack:
|
|
ld r1,PACAEMERGSP(r13)
|
|
subi r1,r1,64+INT_FRAME_SIZE
|
|
std r9,_CCR(r1)
|
|
std r10,GPR1(r1)
|
|
std r11,_NIP(r1)
|
|
std r12,_MSR(r1)
|
|
mfspr r11,SPRN_DAR
|
|
mfspr r12,SPRN_DSISR
|
|
std r11,_DAR(r1)
|
|
std r12,_DSISR(r1)
|
|
mflr r10
|
|
mfctr r11
|
|
mfxer r12
|
|
std r10,_LINK(r1)
|
|
std r11,_CTR(r1)
|
|
std r12,_XER(r1)
|
|
SAVE_GPR(0,r1)
|
|
SAVE_GPR(2,r1)
|
|
SAVE_4GPRS(3,r1)
|
|
SAVE_2GPRS(7,r1)
|
|
SAVE_10GPRS(12,r1)
|
|
SAVE_10GPRS(22,r1)
|
|
addi r11,r1,INT_FRAME_SIZE
|
|
std r11,0(r1)
|
|
li r12,0
|
|
std r12,0(r11)
|
|
ld r2,PACATOC(r13)
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .kernel_bad_stack
|
|
b 1b
|
|
|
|
/*
|
|
* Return from an exception with minimal checks.
|
|
* The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
|
|
* If interrupts have been enabled, or anything has been
|
|
* done that might have changed the scheduling status of
|
|
* any task or sent any task a signal, you should use
|
|
* ret_from_except or ret_from_except_lite instead of this.
|
|
*/
|
|
.globl fast_exception_return
|
|
fast_exception_return:
|
|
ld r12,_MSR(r1)
|
|
ld r11,_NIP(r1)
|
|
andi. r3,r12,MSR_RI /* check if RI is set */
|
|
beq- unrecov_fer
|
|
ld r3,_CCR(r1)
|
|
ld r4,_LINK(r1)
|
|
ld r5,_CTR(r1)
|
|
ld r6,_XER(r1)
|
|
mtcr r3
|
|
mtlr r4
|
|
mtctr r5
|
|
mtxer r6
|
|
REST_GPR(0, r1)
|
|
REST_8GPRS(2, r1)
|
|
|
|
mfmsr r10
|
|
clrrdi r10,r10,2 /* clear RI (LE is 0 already) */
|
|
mtmsrd r10,1
|
|
|
|
mtspr SPRN_SRR1,r12
|
|
mtspr SPRN_SRR0,r11
|
|
REST_4GPRS(10, r1)
|
|
ld r1,GPR1(r1)
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
unrecov_fer:
|
|
bl .save_nvgprs
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .unrecoverable_exception
|
|
b 1b
|
|
|
|
/*
|
|
* Here r13 points to the paca, r9 contains the saved CR,
|
|
* SRR0 and SRR1 are saved in r11 and r12,
|
|
* r9 - r13 are saved in paca->exgen.
|
|
*/
|
|
.align 7
|
|
.globl data_access_common
|
|
data_access_common:
|
|
RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
|
|
mfspr r10,SPRN_DAR
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
li r5,0x300
|
|
b .do_hash_page /* Try to handle as hpte fault */
|
|
|
|
.align 7
|
|
.globl instruction_access_common
|
|
instruction_access_common:
|
|
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
|
|
ld r3,_NIP(r1)
|
|
andis. r4,r12,0x5820
|
|
li r5,0x400
|
|
b .do_hash_page /* Try to handle as hpte fault */
|
|
|
|
/*
|
|
* Here is the common SLB miss user that is used when going to virtual
|
|
* mode for SLB misses, that is currently not used
|
|
*/
|
|
#ifdef __DISABLED__
|
|
.align 7
|
|
.globl slb_miss_user_common
|
|
slb_miss_user_common:
|
|
mflr r10
|
|
std r3,PACA_EXGEN+EX_DAR(r13)
|
|
stw r9,PACA_EXGEN+EX_CCR(r13)
|
|
std r10,PACA_EXGEN+EX_LR(r13)
|
|
std r11,PACA_EXGEN+EX_SRR0(r13)
|
|
bl .slb_allocate_user
|
|
|
|
ld r10,PACA_EXGEN+EX_LR(r13)
|
|
ld r3,PACA_EXGEN+EX_R3(r13)
|
|
lwz r9,PACA_EXGEN+EX_CCR(r13)
|
|
ld r11,PACA_EXGEN+EX_SRR0(r13)
|
|
mtlr r10
|
|
beq- slb_miss_fault
|
|
|
|
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
|
|
beq- unrecov_user_slb
|
|
mfmsr r10
|
|
|
|
.machine push
|
|
.machine "power4"
|
|
mtcrf 0x80,r9
|
|
.machine pop
|
|
|
|
clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
|
|
mtmsrd r10,1
|
|
|
|
mtspr SRR0,r11
|
|
mtspr SRR1,r12
|
|
|
|
ld r9,PACA_EXGEN+EX_R9(r13)
|
|
ld r10,PACA_EXGEN+EX_R10(r13)
|
|
ld r11,PACA_EXGEN+EX_R11(r13)
|
|
ld r12,PACA_EXGEN+EX_R12(r13)
|
|
ld r13,PACA_EXGEN+EX_R13(r13)
|
|
rfid
|
|
b .
|
|
|
|
slb_miss_fault:
|
|
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
|
|
ld r4,PACA_EXGEN+EX_DAR(r13)
|
|
li r5,0
|
|
std r4,_DAR(r1)
|
|
std r5,_DSISR(r1)
|
|
b .handle_page_fault
|
|
|
|
unrecov_user_slb:
|
|
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
|
|
DISABLE_INTS
|
|
bl .save_nvgprs
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .unrecoverable_exception
|
|
b 1b
|
|
|
|
#endif /* __DISABLED__ */
|
|
|
|
|
|
/*
|
|
* r13 points to the PACA, r9 contains the saved CR,
|
|
* r12 contain the saved SRR1, SRR0 is still ready for return
|
|
* r3 has the faulting address
|
|
* r9 - r13 are saved in paca->exslb.
|
|
* r3 is saved in paca->slb_r3
|
|
* We assume we aren't going to take any exceptions during this procedure.
|
|
*/
|
|
_GLOBAL(slb_miss_realmode)
|
|
mflr r10
|
|
|
|
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
|
|
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
|
|
|
|
bl .slb_allocate_realmode
|
|
|
|
/* All done -- return from exception. */
|
|
|
|
ld r10,PACA_EXSLB+EX_LR(r13)
|
|
ld r3,PACA_EXSLB+EX_R3(r13)
|
|
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
ld r11,PACALPPACAPTR(r13)
|
|
ld r11,LPPACASRR0(r11) /* get SRR0 value */
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
mtlr r10
|
|
|
|
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
|
|
beq- unrecov_slb
|
|
|
|
.machine push
|
|
.machine "power4"
|
|
mtcrf 0x80,r9
|
|
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
|
|
.machine pop
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
mtspr SPRN_SRR0,r11
|
|
mtspr SPRN_SRR1,r12
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
ld r9,PACA_EXSLB+EX_R9(r13)
|
|
ld r10,PACA_EXSLB+EX_R10(r13)
|
|
ld r11,PACA_EXSLB+EX_R11(r13)
|
|
ld r12,PACA_EXSLB+EX_R12(r13)
|
|
ld r13,PACA_EXSLB+EX_R13(r13)
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
unrecov_slb:
|
|
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
|
|
DISABLE_INTS
|
|
bl .save_nvgprs
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .unrecoverable_exception
|
|
b 1b
|
|
|
|
.align 7
|
|
.globl hardware_interrupt_common
|
|
.globl hardware_interrupt_entry
|
|
hardware_interrupt_common:
|
|
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
|
|
hardware_interrupt_entry:
|
|
DISABLE_INTS
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .do_IRQ
|
|
b .ret_from_except_lite
|
|
|
|
.align 7
|
|
.globl alignment_common
|
|
alignment_common:
|
|
mfspr r10,SPRN_DAR
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
ENABLE_INTS
|
|
bl .alignment_exception
|
|
b .ret_from_except
|
|
|
|
.align 7
|
|
.globl program_check_common
|
|
program_check_common:
|
|
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
|
|
bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
ENABLE_INTS
|
|
bl .program_check_exception
|
|
b .ret_from_except
|
|
|
|
.align 7
|
|
.globl fp_unavailable_common
|
|
fp_unavailable_common:
|
|
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
|
|
bne .load_up_fpu /* if from user, just load it up */
|
|
bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
ENABLE_INTS
|
|
bl .kernel_fp_unavailable_exception
|
|
BUG_OPCODE
|
|
|
|
.align 7
|
|
.globl altivec_unavailable_common
|
|
altivec_unavailable_common:
|
|
EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
|
|
#ifdef CONFIG_ALTIVEC
|
|
BEGIN_FTR_SECTION
|
|
bne .load_up_altivec /* if from user, just load it up */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
#endif
|
|
bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
ENABLE_INTS
|
|
bl .altivec_unavailable_exception
|
|
b .ret_from_except
|
|
|
|
#ifdef CONFIG_ALTIVEC
|
|
/*
|
|
* load_up_altivec(unused, unused, tsk)
|
|
* Disable VMX for the task which had it previously,
|
|
* and save its vector registers in its thread_struct.
|
|
* Enables the VMX for use in the kernel on return.
|
|
* On SMP we know the VMX is free, since we give it up every
|
|
* switch (ie, no lazy save of the vector registers).
|
|
* On entry: r13 == 'current' && last_task_used_altivec != 'current'
|
|
*/
|
|
_STATIC(load_up_altivec)
|
|
mfmsr r5 /* grab the current MSR */
|
|
oris r5,r5,MSR_VEC@h
|
|
mtmsrd r5 /* enable use of VMX now */
|
|
isync
|
|
|
|
/*
|
|
* For SMP, we don't do lazy VMX switching because it just gets too
|
|
* horrendously complex, especially when a task switches from one CPU
|
|
* to another. Instead we call giveup_altvec in switch_to.
|
|
* VRSAVE isn't dealt with here, that is done in the normal context
|
|
* switch code. Note that we could rely on vrsave value to eventually
|
|
* avoid saving all of the VREGs here...
|
|
*/
|
|
#ifndef CONFIG_SMP
|
|
ld r3,last_task_used_altivec@got(r2)
|
|
ld r4,0(r3)
|
|
cmpdi 0,r4,0
|
|
beq 1f
|
|
/* Save VMX state to last_task_used_altivec's THREAD struct */
|
|
addi r4,r4,THREAD
|
|
SAVE_32VRS(0,r5,r4)
|
|
mfvscr vr0
|
|
li r10,THREAD_VSCR
|
|
stvx vr0,r10,r4
|
|
/* Disable VMX for last_task_used_altivec */
|
|
ld r5,PT_REGS(r4)
|
|
ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
lis r6,MSR_VEC@h
|
|
andc r4,r4,r6
|
|
std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
1:
|
|
#endif /* CONFIG_SMP */
|
|
/* Hack: if we get an altivec unavailable trap with VRSAVE
|
|
* set to all zeros, we assume this is a broken application
|
|
* that fails to set it properly, and thus we switch it to
|
|
* all 1's
|
|
*/
|
|
mfspr r4,SPRN_VRSAVE
|
|
cmpdi 0,r4,0
|
|
bne+ 1f
|
|
li r4,-1
|
|
mtspr SPRN_VRSAVE,r4
|
|
1:
|
|
/* enable use of VMX after return */
|
|
ld r4,PACACURRENT(r13)
|
|
addi r5,r4,THREAD /* Get THREAD */
|
|
oris r12,r12,MSR_VEC@h
|
|
std r12,_MSR(r1)
|
|
li r4,1
|
|
li r10,THREAD_VSCR
|
|
stw r4,THREAD_USED_VR(r5)
|
|
lvx vr0,r10,r5
|
|
mtvscr vr0
|
|
REST_32VRS(0,r4,r5)
|
|
#ifndef CONFIG_SMP
|
|
/* Update last_task_used_math to 'current' */
|
|
subi r4,r5,THREAD /* Back to 'current' */
|
|
std r4,0(r3)
|
|
#endif /* CONFIG_SMP */
|
|
/* restore registers and return */
|
|
b fast_exception_return
|
|
#endif /* CONFIG_ALTIVEC */
|
|
|
|
/*
|
|
* Hash table stuff
|
|
*/
|
|
.align 7
|
|
_GLOBAL(do_hash_page)
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
|
|
andis. r0,r4,0xa450 /* weird error? */
|
|
bne- .handle_page_fault /* if not, try to insert a HPTE */
|
|
BEGIN_FTR_SECTION
|
|
andis. r0,r4,0x0020 /* Is it a segment table fault? */
|
|
bne- .do_ste_alloc /* If so handle it */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
|
|
|
|
/*
|
|
* We need to set the _PAGE_USER bit if MSR_PR is set or if we are
|
|
* accessing a userspace segment (even from the kernel). We assume
|
|
* kernel addresses always have the high bit set.
|
|
*/
|
|
rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
|
|
rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
|
|
orc r0,r12,r0 /* MSR_PR | ~high_bit */
|
|
rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
|
|
ori r4,r4,1 /* add _PAGE_PRESENT */
|
|
rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
|
|
|
|
/*
|
|
* On iSeries, we soft-disable interrupts here, then
|
|
* hard-enable interrupts so that the hash_page code can spin on
|
|
* the hash_table_lock without problems on a shared processor.
|
|
*/
|
|
DISABLE_INTS
|
|
|
|
/*
|
|
* r3 contains the faulting address
|
|
* r4 contains the required access permissions
|
|
* r5 contains the trap number
|
|
*
|
|
* at return r3 = 0 for success
|
|
*/
|
|
bl .hash_page /* build HPTE if possible */
|
|
cmpdi r3,0 /* see if hash_page succeeded */
|
|
|
|
#ifdef DO_SOFT_DISABLE
|
|
/*
|
|
* If we had interrupts soft-enabled at the point where the
|
|
* DSI/ISI occurred, and an interrupt came in during hash_page,
|
|
* handle it now.
|
|
* We jump to ret_from_except_lite rather than fast_exception_return
|
|
* because ret_from_except_lite will check for and handle pending
|
|
* interrupts if necessary.
|
|
*/
|
|
beq .ret_from_except_lite
|
|
/* For a hash failure, we don't bother re-enabling interrupts */
|
|
ble- 12f
|
|
|
|
/*
|
|
* hash_page couldn't handle it, set soft interrupt enable back
|
|
* to what it was before the trap. Note that .local_irq_restore
|
|
* handles any interrupts pending at this point.
|
|
*/
|
|
ld r3,SOFTE(r1)
|
|
bl .local_irq_restore
|
|
b 11f
|
|
#else
|
|
beq fast_exception_return /* Return from exception on success */
|
|
ble- 12f /* Failure return from hash_page */
|
|
|
|
/* fall through */
|
|
#endif
|
|
|
|
/* Here we have a page fault that hash_page can't handle. */
|
|
_GLOBAL(handle_page_fault)
|
|
ENABLE_INTS
|
|
11: ld r4,_DAR(r1)
|
|
ld r5,_DSISR(r1)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl .do_page_fault
|
|
cmpdi r3,0
|
|
beq+ .ret_from_except_lite
|
|
bl .save_nvgprs
|
|
mr r5,r3
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
lwz r4,_DAR(r1)
|
|
bl .bad_page_fault
|
|
b .ret_from_except
|
|
|
|
/* We have a page fault that hash_page could handle but HV refused
|
|
* the PTE insertion
|
|
*/
|
|
12: bl .save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
lwz r4,_DAR(r1)
|
|
bl .low_hash_fault
|
|
b .ret_from_except
|
|
|
|
/* here we have a segment miss */
|
|
_GLOBAL(do_ste_alloc)
|
|
bl .ste_allocate /* try to insert stab entry */
|
|
cmpdi r3,0
|
|
beq+ fast_exception_return
|
|
b .handle_page_fault
|
|
|
|
/*
|
|
* r13 points to the PACA, r9 contains the saved CR,
|
|
* r11 and r12 contain the saved SRR0 and SRR1.
|
|
* r9 - r13 are saved in paca->exslb.
|
|
* We assume we aren't going to take any exceptions during this procedure.
|
|
* We assume (DAR >> 60) == 0xc.
|
|
*/
|
|
.align 7
|
|
_GLOBAL(do_stab_bolted)
|
|
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
|
|
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
|
|
|
|
/* Hash to the primary group */
|
|
ld r10,PACASTABVIRT(r13)
|
|
mfspr r11,SPRN_DAR
|
|
srdi r11,r11,28
|
|
rldimi r10,r11,7,52 /* r10 = first ste of the group */
|
|
|
|
/* Calculate VSID */
|
|
/* This is a kernel address, so protovsid = ESID */
|
|
ASM_VSID_SCRAMBLE(r11, r9)
|
|
rldic r9,r11,12,16 /* r9 = vsid << 12 */
|
|
|
|
/* Search the primary group for a free entry */
|
|
1: ld r11,0(r10) /* Test valid bit of the current ste */
|
|
andi. r11,r11,0x80
|
|
beq 2f
|
|
addi r10,r10,16
|
|
andi. r11,r10,0x70
|
|
bne 1b
|
|
|
|
/* Stick for only searching the primary group for now. */
|
|
/* At least for now, we use a very simple random castout scheme */
|
|
/* Use the TB as a random number ; OR in 1 to avoid entry 0 */
|
|
mftb r11
|
|
rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
|
|
ori r11,r11,0x10
|
|
|
|
/* r10 currently points to an ste one past the group of interest */
|
|
/* make it point to the randomly selected entry */
|
|
subi r10,r10,128
|
|
or r10,r10,r11 /* r10 is the entry to invalidate */
|
|
|
|
isync /* mark the entry invalid */
|
|
ld r11,0(r10)
|
|
rldicl r11,r11,56,1 /* clear the valid bit */
|
|
rotldi r11,r11,8
|
|
std r11,0(r10)
|
|
sync
|
|
|
|
clrrdi r11,r11,28 /* Get the esid part of the ste */
|
|
slbie r11
|
|
|
|
2: std r9,8(r10) /* Store the vsid part of the ste */
|
|
eieio
|
|
|
|
mfspr r11,SPRN_DAR /* Get the new esid */
|
|
clrrdi r11,r11,28 /* Permits a full 32b of ESID */
|
|
ori r11,r11,0x90 /* Turn on valid and kp */
|
|
std r11,0(r10) /* Put new entry back into the stab */
|
|
|
|
sync
|
|
|
|
/* All done -- return from exception. */
|
|
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
|
|
ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
|
|
|
|
andi. r10,r12,MSR_RI
|
|
beq- unrecov_slb
|
|
|
|
mtcrf 0x80,r9 /* restore CR */
|
|
|
|
mfmsr r10
|
|
clrrdi r10,r10,2
|
|
mtmsrd r10,1
|
|
|
|
mtspr SPRN_SRR0,r11
|
|
mtspr SPRN_SRR1,r12
|
|
ld r9,PACA_EXSLB+EX_R9(r13)
|
|
ld r10,PACA_EXSLB+EX_R10(r13)
|
|
ld r11,PACA_EXSLB+EX_R11(r13)
|
|
ld r12,PACA_EXSLB+EX_R12(r13)
|
|
ld r13,PACA_EXSLB+EX_R13(r13)
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
/*
|
|
* Space for CPU0's segment table.
|
|
*
|
|
* On iSeries, the hypervisor must fill in at least one entry before
|
|
* we get control (with relocate on). The address is give to the hv
|
|
* as a page number (see xLparMap in lpardata.c), so this must be at a
|
|
* fixed address (the linker can't compute (u64)&initial_stab >>
|
|
* PAGE_SHIFT).
|
|
*/
|
|
. = STAB0_OFFSET /* 0x6000 */
|
|
.globl initial_stab
|
|
initial_stab:
|
|
.space 4096
|
|
|
|
/*
|
|
* Data area reserved for FWNMI option.
|
|
* This address (0x7000) is fixed by the RPA.
|
|
*/
|
|
.= 0x7000
|
|
.globl fwnmi_data_area
|
|
fwnmi_data_area:
|
|
|
|
/* iSeries does not use the FWNMI stuff, so it is safe to put
|
|
* this here, even if we later allow kernels that will boot on
|
|
* both pSeries and iSeries */
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
. = LPARMAP_PHYS
|
|
#include "lparmap.s"
|
|
/*
|
|
* This ".text" is here for old compilers that generate a trailing
|
|
* .note section when compiling .c files to .s
|
|
*/
|
|
.text
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
. = 0x8000
|
|
|
|
/*
|
|
* On pSeries, secondary processors spin in the following code.
|
|
* At entry, r3 = this processor's number (physical cpu id)
|
|
*/
|
|
_GLOBAL(pSeries_secondary_smp_init)
|
|
mr r24,r3
|
|
|
|
/* turn on 64-bit mode */
|
|
bl .enable_64b_mode
|
|
isync
|
|
|
|
/* Copy some CPU settings from CPU 0 */
|
|
bl .__restore_cpu_setup
|
|
|
|
/* Set up a paca value for this processor. Since we have the
|
|
* physical cpu id in r24, we need to search the pacas to find
|
|
* which logical id maps to our physical one.
|
|
*/
|
|
LOAD_REG_IMMEDIATE(r13, paca) /* Get base vaddr of paca array */
|
|
li r5,0 /* logical cpu id */
|
|
1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
|
|
cmpw r6,r24 /* Compare to our id */
|
|
beq 2f
|
|
addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */
|
|
addi r5,r5,1
|
|
cmpwi r5,NR_CPUS
|
|
blt 1b
|
|
|
|
mr r3,r24 /* not found, copy phys to r3 */
|
|
b .kexec_wait /* next kernel might do better */
|
|
|
|
2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
|
|
/* From now on, r24 is expected to be logical cpuid */
|
|
mr r24,r5
|
|
3: HMT_LOW
|
|
lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
|
|
/* start. */
|
|
sync
|
|
|
|
/* Create a temp kernel stack for use before relocation is on. */
|
|
ld r1,PACAEMERGSP(r13)
|
|
subi r1,r1,STACK_FRAME_OVERHEAD
|
|
|
|
cmpwi 0,r23,0
|
|
#ifdef CONFIG_SMP
|
|
bne .__secondary_start
|
|
#endif
|
|
b 3b /* Loop until told to go */
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
_STATIC(__start_initialization_iSeries)
|
|
/* Clear out the BSS */
|
|
LOAD_REG_IMMEDIATE(r11,__bss_stop)
|
|
LOAD_REG_IMMEDIATE(r8,__bss_start)
|
|
sub r11,r11,r8 /* bss size */
|
|
addi r11,r11,7 /* round up to an even double word */
|
|
rldicl. r11,r11,61,3 /* shift right by 3 */
|
|
beq 4f
|
|
addi r8,r8,-8
|
|
li r0,0
|
|
mtctr r11 /* zero this many doublewords */
|
|
3: stdu r0,8(r8)
|
|
bdnz 3b
|
|
4:
|
|
LOAD_REG_IMMEDIATE(r1,init_thread_union)
|
|
addi r1,r1,THREAD_SIZE
|
|
li r0,0
|
|
stdu r0,-STACK_FRAME_OVERHEAD(r1)
|
|
|
|
LOAD_REG_IMMEDIATE(r3,cpu_specs)
|
|
LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
|
|
li r5,0
|
|
bl .identify_cpu
|
|
|
|
LOAD_REG_IMMEDIATE(r2,__toc_start)
|
|
addi r2,r2,0x4000
|
|
addi r2,r2,0x4000
|
|
|
|
bl .iSeries_early_setup
|
|
bl .early_setup
|
|
|
|
/* relocation is on at this point */
|
|
|
|
b .start_here_common
|
|
#endif /* CONFIG_PPC_ISERIES */
|
|
|
|
#ifdef CONFIG_PPC_MULTIPLATFORM
|
|
|
|
_STATIC(__mmu_off)
|
|
mfmsr r3
|
|
andi. r0,r3,MSR_IR|MSR_DR
|
|
beqlr
|
|
andc r3,r3,r0
|
|
mtspr SPRN_SRR0,r4
|
|
mtspr SPRN_SRR1,r3
|
|
sync
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
|
|
/*
|
|
* Here is our main kernel entry point. We support currently 2 kind of entries
|
|
* depending on the value of r5.
|
|
*
|
|
* r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content
|
|
* in r3...r7
|
|
*
|
|
* r5 == NULL -> kexec style entry. r3 is a physical pointer to the
|
|
* DT block, r4 is a physical pointer to the kernel itself
|
|
*
|
|
*/
|
|
_GLOBAL(__start_initialization_multiplatform)
|
|
#ifdef CONFIG_PPC_MULTIPLATFORM
|
|
/*
|
|
* Are we booted from a PROM Of-type client-interface ?
|
|
*/
|
|
cmpldi cr0,r5,0
|
|
bne .__boot_from_prom /* yes -> prom */
|
|
#endif
|
|
|
|
/* Save parameters */
|
|
mr r31,r3
|
|
mr r30,r4
|
|
|
|
/* Make sure we are running in 64 bits mode */
|
|
bl .enable_64b_mode
|
|
|
|
/* Setup some critical 970 SPRs before switching MMU off */
|
|
bl .__970_cpu_preinit
|
|
|
|
/* cpu # */
|
|
li r24,0
|
|
|
|
/* Switch off MMU if not already */
|
|
LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE)
|
|
add r4,r4,r30
|
|
bl .__mmu_off
|
|
b .__after_prom_start
|
|
|
|
#ifdef CONFIG_PPC_MULTIPLATFORM
|
|
_STATIC(__boot_from_prom)
|
|
/* Save parameters */
|
|
mr r31,r3
|
|
mr r30,r4
|
|
mr r29,r5
|
|
mr r28,r6
|
|
mr r27,r7
|
|
|
|
/* Make sure we are running in 64 bits mode */
|
|
bl .enable_64b_mode
|
|
|
|
/* put a relocation offset into r3 */
|
|
bl .reloc_offset
|
|
|
|
LOAD_REG_IMMEDIATE(r2,__toc_start)
|
|
addi r2,r2,0x4000
|
|
addi r2,r2,0x4000
|
|
|
|
/* Relocate the TOC from a virt addr to a real addr */
|
|
add r2,r2,r3
|
|
|
|
/* Restore parameters */
|
|
mr r3,r31
|
|
mr r4,r30
|
|
mr r5,r29
|
|
mr r6,r28
|
|
mr r7,r27
|
|
|
|
/* Do all of the interaction with OF client interface */
|
|
bl .prom_init
|
|
/* We never return */
|
|
trap
|
|
#endif
|
|
|
|
/*
|
|
* At this point, r3 contains the physical address we are running at,
|
|
* returned by prom_init()
|
|
*/
|
|
_STATIC(__after_prom_start)
|
|
|
|
/*
|
|
* We need to run with __start at physical address PHYSICAL_START.
|
|
* This will leave some code in the first 256B of
|
|
* real memory, which are reserved for software use.
|
|
* The remainder of the first page is loaded with the fixed
|
|
* interrupt vectors. The next two pages are filled with
|
|
* unknown exception placeholders.
|
|
*
|
|
* Note: This process overwrites the OF exception vectors.
|
|
* r26 == relocation offset
|
|
* r27 == KERNELBASE
|
|
*/
|
|
bl .reloc_offset
|
|
mr r26,r3
|
|
LOAD_REG_IMMEDIATE(r27, KERNELBASE)
|
|
|
|
LOAD_REG_IMMEDIATE(r3, PHYSICAL_START) /* target addr */
|
|
|
|
// XXX FIXME: Use phys returned by OF (r30)
|
|
add r4,r27,r26 /* source addr */
|
|
/* current address of _start */
|
|
/* i.e. where we are running */
|
|
/* the source addr */
|
|
|
|
LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */
|
|
sub r5,r5,r27
|
|
|
|
li r6,0x100 /* Start offset, the first 0x100 */
|
|
/* bytes were copied earlier. */
|
|
|
|
bl .copy_and_flush /* copy the first n bytes */
|
|
/* this includes the code being */
|
|
/* executed here. */
|
|
|
|
LOAD_REG_IMMEDIATE(r0, 4f) /* Jump to the copy of this code */
|
|
mtctr r0 /* that we just made/relocated */
|
|
bctr
|
|
|
|
4: LOAD_REG_IMMEDIATE(r5,klimit)
|
|
add r5,r5,r26
|
|
ld r5,0(r5) /* get the value of klimit */
|
|
sub r5,r5,r27
|
|
bl .copy_and_flush /* copy the rest */
|
|
b .start_here_multiplatform
|
|
|
|
#endif /* CONFIG_PPC_MULTIPLATFORM */
|
|
|
|
/*
|
|
* Copy routine used to copy the kernel to start at physical address 0
|
|
* and flush and invalidate the caches as needed.
|
|
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
|
|
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
|
|
*
|
|
* Note: this routine *only* clobbers r0, r6 and lr
|
|
*/
|
|
_GLOBAL(copy_and_flush)
|
|
addi r5,r5,-8
|
|
addi r6,r6,-8
|
|
4: li r0,16 /* Use the least common */
|
|
/* denominator cache line */
|
|
/* size. This results in */
|
|
/* extra cache line flushes */
|
|
/* but operation is correct. */
|
|
/* Can't get cache line size */
|
|
/* from NACA as it is being */
|
|
/* moved too. */
|
|
|
|
mtctr r0 /* put # words/line in ctr */
|
|
3: addi r6,r6,8 /* copy a cache line */
|
|
ldx r0,r6,r4
|
|
stdx r0,r6,r3
|
|
bdnz 3b
|
|
dcbst r6,r3 /* write it to memory */
|
|
sync
|
|
icbi r6,r3 /* flush the icache line */
|
|
cmpld 0,r6,r5
|
|
blt 4b
|
|
sync
|
|
addi r5,r5,8
|
|
addi r6,r6,8
|
|
blr
|
|
|
|
.align 8
|
|
copy_to_here:
|
|
|
|
#ifdef CONFIG_SMP
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/*
|
|
* On PowerMac, secondary processors starts from the reset vector, which
|
|
* is temporarily turned into a call to one of the functions below.
|
|
*/
|
|
.section ".text";
|
|
.align 2 ;
|
|
|
|
.globl __secondary_start_pmac_0
|
|
__secondary_start_pmac_0:
|
|
/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
|
|
li r24,0
|
|
b 1f
|
|
li r24,1
|
|
b 1f
|
|
li r24,2
|
|
b 1f
|
|
li r24,3
|
|
1:
|
|
|
|
_GLOBAL(pmac_secondary_start)
|
|
/* turn on 64-bit mode */
|
|
bl .enable_64b_mode
|
|
isync
|
|
|
|
/* Copy some CPU settings from CPU 0 */
|
|
bl .__restore_cpu_setup
|
|
|
|
/* pSeries do that early though I don't think we really need it */
|
|
mfmsr r3
|
|
ori r3,r3,MSR_RI
|
|
mtmsrd r3 /* RI on */
|
|
|
|
/* Set up a paca value for this processor. */
|
|
LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
|
|
mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
|
|
add r13,r13,r4 /* for this processor. */
|
|
mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
|
|
|
|
/* Create a temp kernel stack for use before relocation is on. */
|
|
ld r1,PACAEMERGSP(r13)
|
|
subi r1,r1,STACK_FRAME_OVERHEAD
|
|
|
|
b .__secondary_start
|
|
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
/*
|
|
* This function is called after the master CPU has released the
|
|
* secondary processors. The execution environment is relocation off.
|
|
* The paca for this processor has the following fields initialized at
|
|
* this point:
|
|
* 1. Processor number
|
|
* 2. Segment table pointer (virtual address)
|
|
* On entry the following are set:
|
|
* r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
|
|
* r24 = cpu# (in Linux terms)
|
|
* r13 = paca virtual address
|
|
* SPRG3 = paca virtual address
|
|
*/
|
|
_GLOBAL(__secondary_start)
|
|
/* Set thread priority to MEDIUM */
|
|
HMT_MEDIUM
|
|
|
|
/* Load TOC */
|
|
ld r2,PACATOC(r13)
|
|
|
|
/* Do early setup for that CPU (stab, slb, hash table pointer) */
|
|
bl .early_setup_secondary
|
|
|
|
/* Initialize the kernel stack. Just a repeat for iSeries. */
|
|
LOAD_REG_ADDR(r3, current_set)
|
|
sldi r28,r24,3 /* get current_set[cpu#] */
|
|
ldx r1,r3,r28
|
|
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
|
|
std r1,PACAKSAVE(r13)
|
|
|
|
/* Clear backchain so we get nice backtraces */
|
|
li r7,0
|
|
mtlr r7
|
|
|
|
/* enable MMU and jump to start_secondary */
|
|
LOAD_REG_ADDR(r3, .start_secondary_prolog)
|
|
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
|
|
#ifdef DO_SOFT_DISABLE
|
|
ori r4,r4,MSR_EE
|
|
#endif
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
/*
|
|
* Running with relocation on at this point. All we want to do is
|
|
* zero the stack back-chain pointer before going into C code.
|
|
*/
|
|
_GLOBAL(start_secondary_prolog)
|
|
li r3,0
|
|
std r3,0(r1) /* Zero the stack frame pointer */
|
|
bl .start_secondary
|
|
b .
|
|
#endif
|
|
|
|
/*
|
|
* This subroutine clobbers r11 and r12
|
|
*/
|
|
_GLOBAL(enable_64b_mode)
|
|
mfmsr r11 /* grab the current MSR */
|
|
li r12,1
|
|
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
|
|
or r11,r11,r12
|
|
li r12,1
|
|
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
|
|
or r11,r11,r12
|
|
mtmsrd r11
|
|
isync
|
|
blr
|
|
|
|
#ifdef CONFIG_PPC_MULTIPLATFORM
|
|
/*
|
|
* This is where the main kernel code starts.
|
|
*/
|
|
_STATIC(start_here_multiplatform)
|
|
/* get a new offset, now that the kernel has moved. */
|
|
bl .reloc_offset
|
|
mr r26,r3
|
|
|
|
/* Clear out the BSS. It may have been done in prom_init,
|
|
* already but that's irrelevant since prom_init will soon
|
|
* be detached from the kernel completely. Besides, we need
|
|
* to clear it now for kexec-style entry.
|
|
*/
|
|
LOAD_REG_IMMEDIATE(r11,__bss_stop)
|
|
LOAD_REG_IMMEDIATE(r8,__bss_start)
|
|
sub r11,r11,r8 /* bss size */
|
|
addi r11,r11,7 /* round up to an even double word */
|
|
rldicl. r11,r11,61,3 /* shift right by 3 */
|
|
beq 4f
|
|
addi r8,r8,-8
|
|
li r0,0
|
|
mtctr r11 /* zero this many doublewords */
|
|
3: stdu r0,8(r8)
|
|
bdnz 3b
|
|
4:
|
|
|
|
mfmsr r6
|
|
ori r6,r6,MSR_RI
|
|
mtmsrd r6 /* RI on */
|
|
|
|
#ifdef CONFIG_HMT
|
|
/* Start up the second thread on cpu 0 */
|
|
mfspr r3,SPRN_PVR
|
|
srwi r3,r3,16
|
|
cmpwi r3,0x34 /* Pulsar */
|
|
beq 90f
|
|
cmpwi r3,0x36 /* Icestar */
|
|
beq 90f
|
|
cmpwi r3,0x37 /* SStar */
|
|
beq 90f
|
|
b 91f /* HMT not supported */
|
|
90: li r3,0
|
|
bl .hmt_start_secondary
|
|
91:
|
|
#endif
|
|
|
|
/* The following gets the stack and TOC set up with the regs */
|
|
/* pointing to the real addr of the kernel stack. This is */
|
|
/* all done to support the C function call below which sets */
|
|
/* up the htab. This is done because we have relocated the */
|
|
/* kernel but are still running in real mode. */
|
|
|
|
LOAD_REG_IMMEDIATE(r3,init_thread_union)
|
|
add r3,r3,r26
|
|
|
|
/* set up a stack pointer (physical address) */
|
|
addi r1,r3,THREAD_SIZE
|
|
li r0,0
|
|
stdu r0,-STACK_FRAME_OVERHEAD(r1)
|
|
|
|
/* set up the TOC (physical address) */
|
|
LOAD_REG_IMMEDIATE(r2,__toc_start)
|
|
addi r2,r2,0x4000
|
|
addi r2,r2,0x4000
|
|
add r2,r2,r26
|
|
|
|
LOAD_REG_IMMEDIATE(r3, cpu_specs)
|
|
add r3,r3,r26
|
|
LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
|
|
add r4,r4,r26
|
|
mr r5,r26
|
|
bl .identify_cpu
|
|
|
|
/* Save some low level config HIDs of CPU0 to be copied to
|
|
* other CPUs later on, or used for suspend/resume
|
|
*/
|
|
bl .__save_cpu_setup
|
|
sync
|
|
|
|
/* Setup a valid physical PACA pointer in SPRG3 for early_setup
|
|
* note that boot_cpuid can always be 0 nowadays since there is
|
|
* nowhere it can be initialized differently before we reach this
|
|
* code
|
|
*/
|
|
LOAD_REG_IMMEDIATE(r27, boot_cpuid)
|
|
add r27,r27,r26
|
|
lwz r27,0(r27)
|
|
|
|
LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */
|
|
mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
|
|
add r13,r13,r24 /* for this processor. */
|
|
add r13,r13,r26 /* convert to physical addr */
|
|
mtspr SPRN_SPRG3,r13
|
|
|
|
/* Do very early kernel initializations, including initial hash table,
|
|
* stab and slb setup before we turn on relocation. */
|
|
|
|
/* Restore parameters passed from prom_init/kexec */
|
|
mr r3,r31
|
|
bl .early_setup
|
|
|
|
LOAD_REG_IMMEDIATE(r3, .start_here_common)
|
|
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
#endif /* CONFIG_PPC_MULTIPLATFORM */
|
|
|
|
/* This is where all platforms converge execution */
|
|
_STATIC(start_here_common)
|
|
/* relocation is on at this point */
|
|
|
|
/* The following code sets up the SP and TOC now that we are */
|
|
/* running with translation enabled. */
|
|
|
|
LOAD_REG_IMMEDIATE(r3,init_thread_union)
|
|
|
|
/* set up the stack */
|
|
addi r1,r3,THREAD_SIZE
|
|
li r0,0
|
|
stdu r0,-STACK_FRAME_OVERHEAD(r1)
|
|
|
|
/* Apply the CPUs-specific fixups (nop out sections not relevant
|
|
* to this CPU
|
|
*/
|
|
li r3,0
|
|
bl .do_cpu_ftr_fixups
|
|
|
|
LOAD_REG_IMMEDIATE(r26, boot_cpuid)
|
|
lwz r26,0(r26)
|
|
|
|
LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */
|
|
mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */
|
|
add r13,r13,r24 /* for this processor. */
|
|
mtspr SPRN_SPRG3,r13
|
|
|
|
/* ptr to current */
|
|
LOAD_REG_IMMEDIATE(r4, init_task)
|
|
std r4,PACACURRENT(r13)
|
|
|
|
/* Load the TOC */
|
|
ld r2,PACATOC(r13)
|
|
std r1,PACAKSAVE(r13)
|
|
|
|
bl .setup_system
|
|
|
|
/* Load up the kernel context */
|
|
5:
|
|
#ifdef DO_SOFT_DISABLE
|
|
li r5,0
|
|
stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
|
|
mfmsr r5
|
|
ori r5,r5,MSR_EE /* Hard Enabled */
|
|
mtmsrd r5
|
|
#endif
|
|
|
|
bl .start_kernel
|
|
|
|
_GLOBAL(hmt_init)
|
|
#ifdef CONFIG_HMT
|
|
LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
|
|
mfspr r7,SPRN_PVR
|
|
srwi r7,r7,16
|
|
cmpwi r7,0x34 /* Pulsar */
|
|
beq 90f
|
|
cmpwi r7,0x36 /* Icestar */
|
|
beq 91f
|
|
cmpwi r7,0x37 /* SStar */
|
|
beq 91f
|
|
b 101f
|
|
90: mfspr r6,SPRN_PIR
|
|
andi. r6,r6,0x1f
|
|
b 92f
|
|
91: mfspr r6,SPRN_PIR
|
|
andi. r6,r6,0x3ff
|
|
92: sldi r4,r24,3
|
|
stwx r6,r5,r4
|
|
bl .hmt_start_secondary
|
|
b 101f
|
|
|
|
__hmt_secondary_hold:
|
|
LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
|
|
clrldi r5,r5,4
|
|
li r7,0
|
|
mfspr r6,SPRN_PIR
|
|
mfspr r8,SPRN_PVR
|
|
srwi r8,r8,16
|
|
cmpwi r8,0x34
|
|
bne 93f
|
|
andi. r6,r6,0x1f
|
|
b 103f
|
|
93: andi. r6,r6,0x3f
|
|
|
|
103: lwzx r8,r5,r7
|
|
cmpw r8,r6
|
|
beq 104f
|
|
addi r7,r7,8
|
|
b 103b
|
|
|
|
104: addi r7,r7,4
|
|
lwzx r9,r5,r7
|
|
mr r24,r9
|
|
101:
|
|
#endif
|
|
mr r3,r24
|
|
b .pSeries_secondary_smp_init
|
|
|
|
#ifdef CONFIG_HMT
|
|
_GLOBAL(hmt_start_secondary)
|
|
LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold)
|
|
clrldi r4,r4,4
|
|
mtspr SPRN_NIADORM, r4
|
|
mfspr r4, SPRN_MSRDORM
|
|
li r5, -65
|
|
and r4, r4, r5
|
|
mtspr SPRN_MSRDORM, r4
|
|
lis r4,0xffef
|
|
ori r4,r4,0x7403
|
|
mtspr SPRN_TSC, r4
|
|
li r4,0x1f4
|
|
mtspr SPRN_TST, r4
|
|
mfspr r4, SPRN_HID0
|
|
ori r4, r4, 0x1
|
|
mtspr SPRN_HID0, r4
|
|
mfspr r4, SPRN_CTRLF
|
|
oris r4, r4, 0x40
|
|
mtspr SPRN_CTRLT, r4
|
|
blr
|
|
#endif
|
|
|
|
/*
|
|
* We put a few things here that have to be page-aligned.
|
|
* This stuff goes at the beginning of the bss, which is page-aligned.
|
|
*/
|
|
.section ".bss"
|
|
|
|
.align PAGE_SHIFT
|
|
|
|
.globl empty_zero_page
|
|
empty_zero_page:
|
|
.space PAGE_SIZE
|
|
|
|
.globl swapper_pg_dir
|
|
swapper_pg_dir:
|
|
.space PAGE_SIZE
|
|
|
|
/*
|
|
* This space gets a copy of optional info passed to us by the bootstrap
|
|
* Used to pass parameters into the kernel like root=/dev/sda1, etc.
|
|
*/
|
|
.globl cmd_line
|
|
cmd_line:
|
|
.space COMMAND_LINE_SIZE
|