linux/drivers/mmc/host/sdhci-brcmstb.c
Kamal Dasu 886201c70a mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
Use clk_get_rate for base_clk on resume before setting new rate.
This change ensures that the clock api returns current rate
and sets the clock to the desired rate and honors CLK_GET_NO_CACHE
attribute used by clock api.

Fixes: 97904a5985 (mmc: sdhci-brcmstb: Add ability to increase max clock rate for 72116b0)
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220714174132.18541-1-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-18 13:32:47 +02:00

445 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's
*
* Copyright (C) 2015 Broadcom Corporation
*/
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include "sdhci-pltfm.h"
#include "cqhci.h"
#define SDHCI_VENDOR 0x78
#define SDHCI_VENDOR_ENHANCED_STRB 0x1
#define SDHCI_VENDOR_GATE_SDCLK_EN 0x2
#define BRCMSTB_MATCH_FLAGS_NO_64BIT BIT(0)
#define BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT BIT(1)
#define BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE BIT(2)
#define BRCMSTB_PRIV_FLAGS_HAS_CQE BIT(0)
#define BRCMSTB_PRIV_FLAGS_GATE_CLOCK BIT(1)
#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
struct sdhci_brcmstb_priv {
void __iomem *cfg_regs;
unsigned int flags;
struct clk *base_clk;
u32 base_freq_hz;
};
struct brcmstb_match_priv {
void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios);
struct sdhci_ops *ops;
const unsigned int flags;
};
static inline void enable_clock_gating(struct sdhci_host *host)
{
u32 reg;
reg = sdhci_readl(host, SDHCI_VENDOR);
reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
sdhci_writel(host, reg, SDHCI_VENDOR);
}
static void brcmstb_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
sdhci_reset(host, mask);
/* Reset will clear this, so re-enable it */
if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
enable_clock_gating(host);
}
static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
u32 reg;
dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n",
__func__);
reg = readl(host->ioaddr + SDHCI_VENDOR);
if (ios->enhanced_strobe)
reg |= SDHCI_VENDOR_ENHANCED_STRB;
else
reg &= ~SDHCI_VENDOR_ENHANCED_STRB;
writel(reg, host->ioaddr + SDHCI_VENDOR);
}
static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock)
{
u16 clk;
host->mmc->actual_clock = 0;
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return;
sdhci_enable_clk(host, clk);
}
static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host,
unsigned int timing)
{
u16 ctrl_2;
dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n",
__func__, timing);
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
if ((timing == MMC_TIMING_MMC_HS200) ||
(timing == MMC_TIMING_UHS_SDR104))
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
else if (timing == MMC_TIMING_UHS_SDR12)
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
else if (timing == MMC_TIMING_SD_HS ||
timing == MMC_TIMING_MMC_HS ||
timing == MMC_TIMING_UHS_SDR25)
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
else if (timing == MMC_TIMING_UHS_SDR50)
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
else if ((timing == MMC_TIMING_UHS_DDR50) ||
(timing == MMC_TIMING_MMC_DDR52))
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
else if (timing == MMC_TIMING_MMC_HS400)
ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc)
{
sdhci_dumpregs(mmc_priv(mmc));
}
static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc)
{
struct sdhci_host *host = mmc_priv(mmc);
u32 reg;
reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
while (reg & SDHCI_DATA_AVAILABLE) {
sdhci_readl(host, SDHCI_BUFFER);
reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
}
sdhci_cqe_enable(mmc);
}
static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = {
.enable = sdhci_brcmstb_cqe_enable,
.disable = sdhci_cqe_disable,
.dumpregs = sdhci_brcmstb_dumpregs,
};
static struct sdhci_ops sdhci_brcmstb_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
.set_clock = sdhci_brcmstb_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = brcmstb_reset,
.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
};
static struct brcmstb_match_priv match_priv_7425 = {
.flags = BRCMSTB_MATCH_FLAGS_NO_64BIT |
BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
.ops = &sdhci_brcmstb_ops,
};
static struct brcmstb_match_priv match_priv_7445 = {
.flags = BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
.ops = &sdhci_brcmstb_ops,
};
static const struct brcmstb_match_priv match_priv_7216 = {
.flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
.hs400es = sdhci_brcmstb_hs400es,
.ops = &sdhci_brcmstb_ops_7216,
};
static const struct of_device_id sdhci_brcm_of_match[] = {
{ .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
{ .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
{ .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
{},
};
static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask)
{
int cmd_error = 0;
int data_error = 0;
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
return intmask;
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
return 0;
}
static int sdhci_brcmstb_add_host(struct sdhci_host *host,
struct sdhci_brcmstb_priv *priv)
{
struct cqhci_host *cq_host;
bool dma64;
int ret;
if ((priv->flags & BRCMSTB_PRIV_FLAGS_HAS_CQE) == 0)
return sdhci_add_host(host);
dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n");
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
ret = sdhci_setup_host(host);
if (ret)
return ret;
cq_host = devm_kzalloc(mmc_dev(host->mmc),
sizeof(*cq_host), GFP_KERNEL);
if (!cq_host) {
ret = -ENOMEM;
goto cleanup;
}
cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR;
cq_host->ops = &sdhci_brcmstb_cqhci_ops;
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
if (dma64) {
dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n");
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
}
ret = cqhci_init(cq_host, host->mmc, dma64);
if (ret)
goto cleanup;
ret = __sdhci_add_host(host);
if (ret)
goto cleanup;
return 0;
cleanup:
sdhci_cleanup_host(host);
return ret;
}
static int sdhci_brcmstb_probe(struct platform_device *pdev)
{
const struct brcmstb_match_priv *match_priv;
struct sdhci_pltfm_data brcmstb_pdata;
struct sdhci_pltfm_host *pltfm_host;
const struct of_device_id *match;
struct sdhci_brcmstb_priv *priv;
u32 actual_clock_mhz;
struct sdhci_host *host;
struct resource *iomem;
struct clk *clk;
struct clk *base_clk = NULL;
int res;
match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
match_priv = match->data;
dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible);
clk = devm_clk_get_optional(&pdev->dev, NULL);
if (IS_ERR(clk))
return dev_err_probe(&pdev->dev, PTR_ERR(clk),
"Failed to get clock from Device Tree\n");
res = clk_prepare_enable(clk);
if (res)
return res;
memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata));
brcmstb_pdata.ops = match_priv->ops;
host = sdhci_pltfm_init(pdev, &brcmstb_pdata,
sizeof(struct sdhci_brcmstb_priv));
if (IS_ERR(host)) {
res = PTR_ERR(host);
goto err_clk;
}
pltfm_host = sdhci_priv(host);
priv = sdhci_pltfm_priv(pltfm_host);
if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
priv->flags |= BRCMSTB_PRIV_FLAGS_HAS_CQE;
match_priv->ops->irq = sdhci_brcmstb_cqhci_irq;
}
/* Map in the non-standard CFG registers */
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem);
if (IS_ERR(priv->cfg_regs)) {
res = PTR_ERR(priv->cfg_regs);
goto err;
}
sdhci_get_of_property(pdev);
res = mmc_of_parse(host->mmc);
if (res)
goto err;
/*
* Automatic clock gating does not work for SD cards that may
* voltage switch so only enable it for non-removable devices.
*/
if ((match_priv->flags & BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE) &&
(host->mmc->caps & MMC_CAP_NONREMOVABLE))
priv->flags |= BRCMSTB_PRIV_FLAGS_GATE_CLOCK;
/*
* If the chip has enhanced strobe and it's enabled, add
* callback
*/
if (match_priv->hs400es &&
(host->mmc->caps2 & MMC_CAP2_HS400_ES))
host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es;
/*
* Supply the existing CAPS, but clear the UHS modes. This
* will allow these modes to be specified by device tree
* properties through mmc_of_parse().
*/
host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
if (match_priv->flags & BRCMSTB_MATCH_FLAGS_NO_64BIT)
host->caps &= ~SDHCI_CAN_64BIT;
host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
SDHCI_SUPPORT_DDR50);
host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
/* Change the base clock frequency if the DT property exists */
if (device_property_read_u32(&pdev->dev, "clock-frequency",
&priv->base_freq_hz) != 0)
goto add_host;
base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq");
if (IS_ERR(base_clk)) {
dev_warn(&pdev->dev, "Clock for \"sdio_freq\" not found\n");
goto add_host;
}
res = clk_prepare_enable(base_clk);
if (res)
goto err;
/* set improved clock rate */
clk_set_rate(base_clk, priv->base_freq_hz);
actual_clock_mhz = clk_get_rate(base_clk) / 1000000;
host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK;
host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT);
/* Disable presets because they are now incorrect */
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n",
actual_clock_mhz);
priv->base_clk = base_clk;
add_host:
res = sdhci_brcmstb_add_host(host, priv);
if (res)
goto err;
pltfm_host->clk = clk;
return res;
err:
sdhci_pltfm_free(pdev);
err_clk:
clk_disable_unprepare(base_clk);
clk_disable_unprepare(clk);
return res;
}
static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
{
sdhci_pltfm_suspend(&pdev->dev);
}
MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
#ifdef CONFIG_PM_SLEEP
static int sdhci_brcmstb_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
clk_disable_unprepare(priv->base_clk);
return sdhci_pltfm_suspend(dev);
}
static int sdhci_brcmstb_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = sdhci_pltfm_resume(dev);
if (!ret && priv->base_freq_hz) {
ret = clk_prepare_enable(priv->base_clk);
/*
* Note: using clk_get_rate() below as clk_get_rate()
* honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate()
* may do implicit get_rate() calls that do not honor
* CLK_GET_RATE_NOCACHE.
*/
if (!ret &&
(clk_get_rate(priv->base_clk) != priv->base_freq_hz))
ret = clk_set_rate(priv->base_clk, priv->base_freq_hz);
}
return ret;
}
#endif
static const struct dev_pm_ops sdhci_brcmstb_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume)
};
static struct platform_driver sdhci_brcmstb_driver = {
.driver = {
.name = "sdhci-brcmstb",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_brcmstb_pmops,
.of_match_table = of_match_ptr(sdhci_brcm_of_match),
},
.probe = sdhci_brcmstb_probe,
.remove = sdhci_pltfm_unregister,
.shutdown = sdhci_brcmstb_shutdown,
};
module_platform_driver(sdhci_brcmstb_driver);
MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs");
MODULE_AUTHOR("Broadcom");
MODULE_LICENSE("GPL v2");