..
audio.h
bitfield.h
camera.h
V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver
2008-10-12 09:36:50 -02:00
clkdev.h
[ARM] pxa: convert to clkdev and match clocks by struct device where possible
2008-11-27 12:38:23 +00:00
colibri.h
corgi.h
Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-21 09:42:29 +08:00
csb726.h
[ARM] pxa: add initial support for Cogent CSB726 board
2009-03-13 17:10:44 +08:00
debug-macro.S
dma.h
[ARM] pxa: move DMA registers definitions into <mach/dma.h>
2009-03-09 21:22:36 +08:00
entry-macro.S
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15
2008-09-01 17:13:26 +01:00
eseries-gpio.h
[ARM] pxa: Add multi-io support for e-series
2008-12-15 03:29:34 +00:00
eseries-irq.h
gpio.h
[ARM] pxa: fix typo in BANK_OFF() macro in gpio.h
2009-03-13 10:50:17 +08:00
gumstix.h
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
h5000.h
[ARM] pxa: add basic support for HP iPAQ h5000
2008-12-02 14:43:50 +08:00
hardware.h
Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-12-29 18:08:11 +00:00
i2c.h
[ARM] 5278/1: i2c-pxa fast mode support
2008-10-03 15:57:06 +01:00
idp.h
io.h
[ARM] Add a common typesafe __io implementation
2008-11-30 11:45:54 +00:00
irda.h
irqs.h
[ARM] pxa: fix redefinition of NR_IRQS
2008-10-17 13:19:08 +01:00
littleton.h
[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)
2008-12-17 22:52:12 +08:00
lpd270.h
lubbock.h
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
magician.h
[ARM] pxa/magician: Enable pxa27x_udc and gpio_vbus
2009-02-02 16:48:43 +08:00
mainstone.h
memory.h
[ARM] Ensure that both MAX_DMA_ADDRESS and ISA_DMA_THRESHOLD are defined
2008-11-30 13:26:47 +00:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h
[ARM] pxa: add support for additional GPIOs on PXA26x
2008-12-02 14:42:37 +08:00
mfp-pxa27x.h
[ARM] pxa: add missing GPIOs definitions
2008-12-02 14:42:41 +08:00
mfp-pxa300.h
[ARM] pxa: add missing pin function for CS2 on GPIO1
2009-03-19 16:20:39 +08:00
mfp-pxa320.h
[ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3
2009-03-23 09:53:33 +08:00
mfp-pxa930.h
[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
2008-12-29 17:57:23 +08:00
mfp.h
[ARM] pxa: better MFP low power state support for pxa25x/pxa27x
2008-09-26 23:43:20 +01:00
mioa701.h
[ARM] pxa/MioA701: discovered new gpio definitions.
2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
ohci.h
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
palmasoc.h
ASoC: Add Palm/PXA27x unified ASoC audio driver
2008-11-05 22:11:16 +00:00
palmld.h
[ARM] pxa: PalmLD initial support
2009-01-21 15:06:34 +08:00
palmt5.h
[ARM] pxa: PalmT5 initial support
2009-01-21 15:06:34 +08:00
palmtx.h
palmz72.h
[ARM] 5239/1: Palm Zire 72 power management support
2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
poodle.h
[ARM] pxa/poodle: prepare scoop for the generic GPIO API
2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
pxa2xx-regs.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
pxa3xx_nand.h
[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data
2008-09-01 21:38:34 +01:00
pxa3xx-regs.h
[ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.h
2009-03-09 21:22:40 +08:00
pxa25x-udc.h
pxa25x.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa27x_keypad.h
pxa27x-udc.h
pxa27x.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa300.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa320.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa930_rotary.h
Input: add support for enhanced rotary controller on pxa930 and pxa935
2008-12-29 04:59:16 -08:00
pxa930_trkball.h
Input: add support for trackball on pxa930 and pxa935
2008-12-29 04:58:58 -08:00
pxa930.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxafb.h
[ARM] pxafb: allow video memory size to be configurable
2008-12-29 17:59:16 +08:00
regs-ac97.h
[ARM] pxa: fix missing of __REG() definition for ac97 registers access
2009-01-19 11:39:36 +08:00
regs-intc.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
regs-lcd.h
[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
2008-12-29 18:00:04 +08:00
regs-ost.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
regs-rtc.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
regs-ssp.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
regs-uart.h
[ARM] pxa: move UART register definitions into dedicated regs-uart.h
2008-12-02 14:42:38 +08:00
reset.h
[ARM] fix kernel-doc syntax
2008-12-14 12:02:39 +00:00
sharpsl.h
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
spitz.h
[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h
2008-10-21 22:45:57 +08:00
ssp.h
[ARM] 5224/2: PXA SSP: Introduce register accessors
2008-09-09 16:32:52 +01:00
system.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
timex.h
[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
2008-12-29 17:57:48 +08:00
tosa_bt.h
tosa.h
backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-21 00:19:49 +01:00
trizeps4.h
[ARM] 5204/1: Trizeps4 SOM update
2008-10-01 22:33:11 +01:00
udc.h
uncompress.h
[ARM] pxa: add initial support for Cogent CSB726 board
2009-03-13 17:10:44 +08:00
viper.h
Basic support for the Arcom/Eurotech Viper SBC.
2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h
misc: replace remaining __FUNCTION__ with __func__
2008-10-20 16:17:42 -07:00
