fb24ea52f7
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
1581 lines
39 KiB
C
1581 lines
39 KiB
C
/* Silan SC92031 PCI Fast Ethernet Adapter driver
|
|
*
|
|
* Based on vendor drivers:
|
|
* Silan Fast Ethernet Netcard Driver:
|
|
* MODULE_AUTHOR ("gaoyonghong");
|
|
* MODULE_DESCRIPTION ("SILAN Fast Ethernet driver");
|
|
* MODULE_LICENSE("GPL");
|
|
* 8139D Fast Ethernet driver:
|
|
* (C) 2002 by gaoyonghong
|
|
* MODULE_AUTHOR ("gaoyonghong");
|
|
* MODULE_DESCRIPTION ("Rsltek 8139D PCI Fast Ethernet Adapter driver");
|
|
* MODULE_LICENSE("GPL");
|
|
* Both are almost identical and seem to be based on pci-skeleton.c
|
|
*
|
|
* Rewritten for 2.6 by Cesar Eduardo Barros
|
|
*
|
|
* A datasheet for this chip can be found at
|
|
* http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf
|
|
*/
|
|
|
|
/* Note about set_mac_address: I don't know how to change the hardware
|
|
* matching, so you need to enable IFF_PROMISC when using it.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/crc32.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#define SC92031_NAME "sc92031"
|
|
|
|
/* BAR 0 is MMIO, BAR 1 is PIO */
|
|
#define SC92031_USE_PIO 0
|
|
|
|
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
|
|
static int multicast_filter_limit = 64;
|
|
module_param(multicast_filter_limit, int, 0);
|
|
MODULE_PARM_DESC(multicast_filter_limit,
|
|
"Maximum number of filtered multicast addresses");
|
|
|
|
static int media;
|
|
module_param(media, int, 0);
|
|
MODULE_PARM_DESC(media, "Media type (0x00 = autodetect,"
|
|
" 0x01 = 10M half, 0x02 = 10M full,"
|
|
" 0x04 = 100M half, 0x08 = 100M full)");
|
|
|
|
/* Size of the in-memory receive ring. */
|
|
#define RX_BUF_LEN_IDX 3 /* 0==8K, 1==16K, 2==32K, 3==64K ,4==128K*/
|
|
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
|
|
|
|
/* Number of Tx descriptor registers. */
|
|
#define NUM_TX_DESC 4
|
|
|
|
/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
|
|
#define MAX_ETH_FRAME_SIZE 1536
|
|
|
|
/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
|
|
#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
|
|
#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
|
|
|
|
/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
|
|
#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (4*HZ)
|
|
|
|
#define SILAN_STATS_NUM 2 /* number of ETHTOOL_GSTATS */
|
|
|
|
/* media options */
|
|
#define AUTOSELECT 0x00
|
|
#define M10_HALF 0x01
|
|
#define M10_FULL 0x02
|
|
#define M100_HALF 0x04
|
|
#define M100_FULL 0x08
|
|
|
|
/* Symbolic offsets to registers. */
|
|
enum silan_registers {
|
|
Config0 = 0x00, // Config0
|
|
Config1 = 0x04, // Config1
|
|
RxBufWPtr = 0x08, // Rx buffer writer poiter
|
|
IntrStatus = 0x0C, // Interrupt status
|
|
IntrMask = 0x10, // Interrupt mask
|
|
RxbufAddr = 0x14, // Rx buffer start address
|
|
RxBufRPtr = 0x18, // Rx buffer read pointer
|
|
Txstatusall = 0x1C, // Transmit status of all descriptors
|
|
TxStatus0 = 0x20, // Transmit status (Four 32bit registers).
|
|
TxAddr0 = 0x30, // Tx descriptors (also four 32bit).
|
|
RxConfig = 0x40, // Rx configuration
|
|
MAC0 = 0x44, // Ethernet hardware address.
|
|
MAR0 = 0x4C, // Multicast filter.
|
|
RxStatus0 = 0x54, // Rx status
|
|
TxConfig = 0x5C, // Tx configuration
|
|
PhyCtrl = 0x60, // physical control
|
|
FlowCtrlConfig = 0x64, // flow control
|
|
Miicmd0 = 0x68, // Mii command0 register
|
|
Miicmd1 = 0x6C, // Mii command1 register
|
|
Miistatus = 0x70, // Mii status register
|
|
Timercnt = 0x74, // Timer counter register
|
|
TimerIntr = 0x78, // Timer interrupt register
|
|
PMConfig = 0x7C, // Power Manager configuration
|
|
CRC0 = 0x80, // Power Manager CRC ( Two 32bit regisers)
|
|
Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit regiser)
|
|
LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit regiser)
|
|
TestD0 = 0xD0,
|
|
TestD4 = 0xD4,
|
|
TestD8 = 0xD8,
|
|
};
|
|
|
|
#define MII_JAB 16
|
|
#define MII_OutputStatus 24
|
|
|
|
#define PHY_16_JAB_ENB 0x1000
|
|
#define PHY_16_PORT_ENB 0x1
|
|
|
|
enum IntrStatusBits {
|
|
LinkFail = 0x80000000,
|
|
LinkOK = 0x40000000,
|
|
TimeOut = 0x20000000,
|
|
RxOverflow = 0x0040,
|
|
RxOK = 0x0020,
|
|
TxOK = 0x0001,
|
|
IntrBits = LinkFail|LinkOK|TimeOut|RxOverflow|RxOK|TxOK,
|
|
};
|
|
|
|
enum TxStatusBits {
|
|
TxCarrierLost = 0x20000000,
|
|
TxAborted = 0x10000000,
|
|
TxOutOfWindow = 0x08000000,
|
|
TxNccShift = 22,
|
|
EarlyTxThresShift = 16,
|
|
TxStatOK = 0x8000,
|
|
TxUnderrun = 0x4000,
|
|
TxOwn = 0x2000,
|
|
};
|
|
|
|
enum RxStatusBits {
|
|
RxStatesOK = 0x80000,
|
|
RxBadAlign = 0x40000,
|
|
RxHugeFrame = 0x20000,
|
|
RxSmallFrame = 0x10000,
|
|
RxCRCOK = 0x8000,
|
|
RxCrlFrame = 0x4000,
|
|
Rx_Broadcast = 0x2000,
|
|
Rx_Multicast = 0x1000,
|
|
RxAddrMatch = 0x0800,
|
|
MiiErr = 0x0400,
|
|
};
|
|
|
|
enum RxConfigBits {
|
|
RxFullDx = 0x80000000,
|
|
RxEnb = 0x40000000,
|
|
RxSmall = 0x20000000,
|
|
RxHuge = 0x10000000,
|
|
RxErr = 0x08000000,
|
|
RxAllphys = 0x04000000,
|
|
RxMulticast = 0x02000000,
|
|
RxBroadcast = 0x01000000,
|
|
RxLoopBack = (1 << 23) | (1 << 22),
|
|
LowThresholdShift = 12,
|
|
HighThresholdShift = 2,
|
|
};
|
|
|
|
enum TxConfigBits {
|
|
TxFullDx = 0x80000000,
|
|
TxEnb = 0x40000000,
|
|
TxEnbPad = 0x20000000,
|
|
TxEnbHuge = 0x10000000,
|
|
TxEnbFCS = 0x08000000,
|
|
TxNoBackOff = 0x04000000,
|
|
TxEnbPrem = 0x02000000,
|
|
TxCareLostCrs = 0x1000000,
|
|
TxExdCollNum = 0xf00000,
|
|
TxDataRate = 0x80000,
|
|
};
|
|
|
|
enum PhyCtrlconfigbits {
|
|
PhyCtrlAne = 0x80000000,
|
|
PhyCtrlSpd100 = 0x40000000,
|
|
PhyCtrlSpd10 = 0x20000000,
|
|
PhyCtrlPhyBaseAddr = 0x1f000000,
|
|
PhyCtrlDux = 0x800000,
|
|
PhyCtrlReset = 0x400000,
|
|
};
|
|
|
|
enum FlowCtrlConfigBits {
|
|
FlowCtrlFullDX = 0x80000000,
|
|
FlowCtrlEnb = 0x40000000,
|
|
};
|
|
|
|
enum Config0Bits {
|
|
Cfg0_Reset = 0x80000000,
|
|
Cfg0_Anaoff = 0x40000000,
|
|
Cfg0_LDPS = 0x20000000,
|
|
};
|
|
|
|
enum Config1Bits {
|
|
Cfg1_EarlyRx = 1 << 31,
|
|
Cfg1_EarlyTx = 1 << 30,
|
|
|
|
//rx buffer size
|
|
Cfg1_Rcv8K = 0x0,
|
|
Cfg1_Rcv16K = 0x1,
|
|
Cfg1_Rcv32K = 0x3,
|
|
Cfg1_Rcv64K = 0x7,
|
|
Cfg1_Rcv128K = 0xf,
|
|
};
|
|
|
|
enum MiiCmd0Bits {
|
|
Mii_Divider = 0x20000000,
|
|
Mii_WRITE = 0x400000,
|
|
Mii_READ = 0x200000,
|
|
Mii_SCAN = 0x100000,
|
|
Mii_Tamod = 0x80000,
|
|
Mii_Drvmod = 0x40000,
|
|
Mii_mdc = 0x20000,
|
|
Mii_mdoen = 0x10000,
|
|
Mii_mdo = 0x8000,
|
|
Mii_mdi = 0x4000,
|
|
};
|
|
|
|
enum MiiStatusBits {
|
|
Mii_StatusBusy = 0x80000000,
|
|
};
|
|
|
|
enum PMConfigBits {
|
|
PM_Enable = 1 << 31,
|
|
PM_LongWF = 1 << 30,
|
|
PM_Magic = 1 << 29,
|
|
PM_LANWake = 1 << 28,
|
|
PM_LWPTN = (1 << 27 | 1<< 26),
|
|
PM_LinkUp = 1 << 25,
|
|
PM_WakeUp = 1 << 24,
|
|
};
|
|
|
|
/* Locking rules:
|
|
* priv->lock protects most of the fields of priv and most of the
|
|
* hardware registers. It does not have to protect against softirqs
|
|
* between sc92031_disable_interrupts and sc92031_enable_interrupts;
|
|
* it also does not need to be used in ->open and ->stop while the
|
|
* device interrupts are off.
|
|
* Not having to protect against softirqs is very useful due to heavy
|
|
* use of mdelay() at _sc92031_reset.
|
|
* Functions prefixed with _sc92031_ must be called with the lock held;
|
|
* functions prefixed with sc92031_ must be called without the lock held.
|
|
* Use mmiowb() before unlocking if the hardware was written to.
|
|
*/
|
|
|
|
/* Locking rules for the interrupt:
|
|
* - the interrupt and the tasklet never run at the same time
|
|
* - neither run between sc92031_disable_interrupts and
|
|
* sc92031_enable_interrupt
|
|
*/
|
|
|
|
struct sc92031_priv {
|
|
spinlock_t lock;
|
|
/* iomap.h cookie */
|
|
void __iomem *port_base;
|
|
/* pci device structure */
|
|
struct pci_dev *pdev;
|
|
/* tasklet */
|
|
struct tasklet_struct tasklet;
|
|
|
|
/* CPU address of rx ring */
|
|
void *rx_ring;
|
|
/* PCI address of rx ring */
|
|
dma_addr_t rx_ring_dma_addr;
|
|
/* PCI address of rx ring read pointer */
|
|
dma_addr_t rx_ring_tail;
|
|
|
|
/* tx ring write index */
|
|
unsigned tx_head;
|
|
/* tx ring read index */
|
|
unsigned tx_tail;
|
|
/* CPU address of tx bounce buffer */
|
|
void *tx_bufs;
|
|
/* PCI address of tx bounce buffer */
|
|
dma_addr_t tx_bufs_dma_addr;
|
|
|
|
/* copies of some hardware registers */
|
|
u32 intr_status;
|
|
atomic_t intr_mask;
|
|
u32 rx_config;
|
|
u32 tx_config;
|
|
u32 pm_config;
|
|
|
|
/* copy of some flags from dev->flags */
|
|
unsigned int mc_flags;
|
|
|
|
/* for ETHTOOL_GSTATS */
|
|
u64 tx_timeouts;
|
|
u64 rx_loss;
|
|
|
|
/* for dev->get_stats */
|
|
long rx_value;
|
|
};
|
|
|
|
/* I don't know which registers can be safely read; however, I can guess
|
|
* MAC0 is one of them. */
|
|
static inline void _sc92031_dummy_read(void __iomem *port_base)
|
|
{
|
|
ioread32(port_base + MAC0);
|
|
}
|
|
|
|
static u32 _sc92031_mii_wait(void __iomem *port_base)
|
|
{
|
|
u32 mii_status;
|
|
|
|
do {
|
|
udelay(10);
|
|
mii_status = ioread32(port_base + Miistatus);
|
|
} while (mii_status & Mii_StatusBusy);
|
|
|
|
return mii_status;
|
|
}
|
|
|
|
static u32 _sc92031_mii_cmd(void __iomem *port_base, u32 cmd0, u32 cmd1)
|
|
{
|
|
iowrite32(Mii_Divider, port_base + Miicmd0);
|
|
|
|
_sc92031_mii_wait(port_base);
|
|
|
|
iowrite32(cmd1, port_base + Miicmd1);
|
|
iowrite32(Mii_Divider | cmd0, port_base + Miicmd0);
|
|
|
|
return _sc92031_mii_wait(port_base);
|
|
}
|
|
|
|
static void _sc92031_mii_scan(void __iomem *port_base)
|
|
{
|
|
_sc92031_mii_cmd(port_base, Mii_SCAN, 0x1 << 6);
|
|
}
|
|
|
|
static u16 _sc92031_mii_read(void __iomem *port_base, unsigned reg)
|
|
{
|
|
return _sc92031_mii_cmd(port_base, Mii_READ, reg << 6) >> 13;
|
|
}
|
|
|
|
static void _sc92031_mii_write(void __iomem *port_base, unsigned reg, u16 val)
|
|
{
|
|
_sc92031_mii_cmd(port_base, Mii_WRITE, (reg << 6) | ((u32)val << 11));
|
|
}
|
|
|
|
static void sc92031_disable_interrupts(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
/* tell the tasklet/interrupt not to enable interrupts */
|
|
atomic_set(&priv->intr_mask, 0);
|
|
wmb();
|
|
|
|
/* stop interrupts */
|
|
iowrite32(0, port_base + IntrMask);
|
|
_sc92031_dummy_read(port_base);
|
|
|
|
/* wait for any concurrent interrupt/tasklet to finish */
|
|
synchronize_irq(priv->pdev->irq);
|
|
tasklet_disable(&priv->tasklet);
|
|
}
|
|
|
|
static void sc92031_enable_interrupts(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
tasklet_enable(&priv->tasklet);
|
|
|
|
atomic_set(&priv->intr_mask, IntrBits);
|
|
wmb();
|
|
|
|
iowrite32(IntrBits, port_base + IntrMask);
|
|
}
|
|
|
|
static void _sc92031_disable_tx_rx(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
priv->rx_config &= ~RxEnb;
|
|
priv->tx_config &= ~TxEnb;
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
iowrite32(priv->tx_config, port_base + TxConfig);
|
|
}
|
|
|
|
static void _sc92031_enable_tx_rx(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
priv->rx_config |= RxEnb;
|
|
priv->tx_config |= TxEnb;
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
iowrite32(priv->tx_config, port_base + TxConfig);
|
|
}
|
|
|
|
static void _sc92031_tx_clear(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
while (priv->tx_head - priv->tx_tail > 0) {
|
|
priv->tx_tail++;
|
|
dev->stats.tx_dropped++;
|
|
}
|
|
priv->tx_head = priv->tx_tail = 0;
|
|
}
|
|
|
|
static void _sc92031_set_mar(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 mar0 = 0, mar1 = 0;
|
|
|
|
if ((dev->flags & IFF_PROMISC) ||
|
|
netdev_mc_count(dev) > multicast_filter_limit ||
|
|
(dev->flags & IFF_ALLMULTI))
|
|
mar0 = mar1 = 0xffffffff;
|
|
else if (dev->flags & IFF_MULTICAST) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
u32 crc;
|
|
unsigned bit = 0;
|
|
|
|
crc = ~ether_crc(ETH_ALEN, ha->addr);
|
|
crc >>= 24;
|
|
|
|
if (crc & 0x01) bit |= 0x02;
|
|
if (crc & 0x02) bit |= 0x01;
|
|
if (crc & 0x10) bit |= 0x20;
|
|
if (crc & 0x20) bit |= 0x10;
|
|
if (crc & 0x40) bit |= 0x08;
|
|
if (crc & 0x80) bit |= 0x04;
|
|
|
|
if (bit > 31)
|
|
mar0 |= 0x1 << (bit - 32);
|
|
else
|
|
mar1 |= 0x1 << bit;
|
|
}
|
|
}
|
|
|
|
iowrite32(mar0, port_base + MAR0);
|
|
iowrite32(mar1, port_base + MAR0 + 4);
|
|
}
|
|
|
|
static void _sc92031_set_rx_config(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
unsigned int old_mc_flags;
|
|
u32 rx_config_bits = 0;
|
|
|
|
old_mc_flags = priv->mc_flags;
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
rx_config_bits |= RxSmall | RxHuge | RxErr | RxBroadcast
|
|
| RxMulticast | RxAllphys;
|
|
|
|
if (dev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
|
|
rx_config_bits |= RxMulticast;
|
|
|
|
if (dev->flags & IFF_BROADCAST)
|
|
rx_config_bits |= RxBroadcast;
|
|
|
|
priv->rx_config &= ~(RxSmall | RxHuge | RxErr | RxBroadcast
|
|
| RxMulticast | RxAllphys);
|
|
priv->rx_config |= rx_config_bits;
|
|
|
|
priv->mc_flags = dev->flags & (IFF_PROMISC | IFF_ALLMULTI
|
|
| IFF_MULTICAST | IFF_BROADCAST);
|
|
|
|
if (netif_carrier_ok(dev) && priv->mc_flags != old_mc_flags)
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
}
|
|
|
|
static bool _sc92031_check_media(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u16 bmsr;
|
|
|
|
bmsr = _sc92031_mii_read(port_base, MII_BMSR);
|
|
rmb();
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
bool speed_100, duplex_full;
|
|
u32 flow_ctrl_config = 0;
|
|
u16 output_status = _sc92031_mii_read(port_base,
|
|
MII_OutputStatus);
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
speed_100 = output_status & 0x2;
|
|
duplex_full = output_status & 0x4;
|
|
|
|
/* Initial Tx/Rx configuration */
|
|
priv->rx_config = (0x40 << LowThresholdShift) | (0x1c0 << HighThresholdShift);
|
|
priv->tx_config = 0x48800000;
|
|
|
|
/* NOTE: vendor driver had dead code here to enable tx padding */
|
|
|
|
if (!speed_100)
|
|
priv->tx_config |= 0x80000;
|
|
|
|
// configure rx mode
|
|
_sc92031_set_rx_config(dev);
|
|
|
|
if (duplex_full) {
|
|
priv->rx_config |= RxFullDx;
|
|
priv->tx_config |= TxFullDx;
|
|
flow_ctrl_config = FlowCtrlFullDX | FlowCtrlEnb;
|
|
} else {
|
|
priv->rx_config &= ~RxFullDx;
|
|
priv->tx_config &= ~TxFullDx;
|
|
}
|
|
|
|
_sc92031_set_mar(dev);
|
|
_sc92031_set_rx_config(dev);
|
|
_sc92031_enable_tx_rx(dev);
|
|
iowrite32(flow_ctrl_config, port_base + FlowCtrlConfig);
|
|
|
|
netif_carrier_on(dev);
|
|
|
|
if (printk_ratelimit())
|
|
printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
|
|
dev->name,
|
|
speed_100 ? "100" : "10",
|
|
duplex_full ? "full" : "half");
|
|
return true;
|
|
} else {
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
|
|
if (printk_ratelimit())
|
|
printk(KERN_INFO "%s: link down\n", dev->name);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void _sc92031_phy_reset(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 phy_ctrl;
|
|
|
|
phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
phy_ctrl &= ~(PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10);
|
|
phy_ctrl |= PhyCtrlAne | PhyCtrlReset;
|
|
|
|
switch (media) {
|
|
default:
|
|
case AUTOSELECT:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
|
|
break;
|
|
case M10_HALF:
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
break;
|
|
case M10_FULL:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd10;
|
|
break;
|
|
case M100_HALF:
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
break;
|
|
case M100_FULL:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
|
|
break;
|
|
}
|
|
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
mdelay(10);
|
|
|
|
phy_ctrl &= ~PhyCtrlReset;
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
mdelay(1);
|
|
|
|
_sc92031_mii_write(port_base, MII_JAB,
|
|
PHY_16_JAB_ENB | PHY_16_PORT_ENB);
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
netif_carrier_off(dev);
|
|
netif_stop_queue(dev);
|
|
}
|
|
|
|
static void _sc92031_reset(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
/* disable PM */
|
|
iowrite32(0, port_base + PMConfig);
|
|
|
|
/* soft reset the chip */
|
|
iowrite32(Cfg0_Reset, port_base + Config0);
|
|
mdelay(200);
|
|
|
|
iowrite32(0, port_base + Config0);
|
|
mdelay(10);
|
|
|
|
/* disable interrupts */
|
|
iowrite32(0, port_base + IntrMask);
|
|
|
|
/* clear multicast address */
|
|
iowrite32(0, port_base + MAR0);
|
|
iowrite32(0, port_base + MAR0 + 4);
|
|
|
|
/* init rx ring */
|
|
iowrite32(priv->rx_ring_dma_addr, port_base + RxbufAddr);
|
|
priv->rx_ring_tail = priv->rx_ring_dma_addr;
|
|
|
|
/* init tx ring */
|
|
_sc92031_tx_clear(dev);
|
|
|
|
/* clear old register values */
|
|
priv->intr_status = 0;
|
|
atomic_set(&priv->intr_mask, 0);
|
|
priv->rx_config = 0;
|
|
priv->tx_config = 0;
|
|
priv->mc_flags = 0;
|
|
|
|
/* configure rx buffer size */
|
|
/* NOTE: vendor driver had dead code here to enable early tx/rx */
|
|
iowrite32(Cfg1_Rcv64K, port_base + Config1);
|
|
|
|
_sc92031_phy_reset(dev);
|
|
_sc92031_check_media(dev);
|
|
|
|
/* calculate rx fifo overflow */
|
|
priv->rx_value = 0;
|
|
|
|
/* enable PM */
|
|
iowrite32(priv->pm_config, port_base + PMConfig);
|
|
|
|
/* clear intr register */
|
|
ioread32(port_base + IntrStatus);
|
|
}
|
|
|
|
static void _sc92031_tx_tasklet(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
unsigned old_tx_tail;
|
|
unsigned entry;
|
|
u32 tx_status;
|
|
|
|
old_tx_tail = priv->tx_tail;
|
|
while (priv->tx_head - priv->tx_tail > 0) {
|
|
entry = priv->tx_tail % NUM_TX_DESC;
|
|
tx_status = ioread32(port_base + TxStatus0 + entry * 4);
|
|
|
|
if (!(tx_status & (TxStatOK | TxUnderrun | TxAborted)))
|
|
break;
|
|
|
|
priv->tx_tail++;
|
|
|
|
if (tx_status & TxStatOK) {
|
|
dev->stats.tx_bytes += tx_status & 0x1fff;
|
|
dev->stats.tx_packets++;
|
|
/* Note: TxCarrierLost is always asserted at 100mbps. */
|
|
dev->stats.collisions += (tx_status >> 22) & 0xf;
|
|
}
|
|
|
|
if (tx_status & (TxOutOfWindow | TxAborted)) {
|
|
dev->stats.tx_errors++;
|
|
|
|
if (tx_status & TxAborted)
|
|
dev->stats.tx_aborted_errors++;
|
|
|
|
if (tx_status & TxCarrierLost)
|
|
dev->stats.tx_carrier_errors++;
|
|
|
|
if (tx_status & TxOutOfWindow)
|
|
dev->stats.tx_window_errors++;
|
|
}
|
|
|
|
if (tx_status & TxUnderrun)
|
|
dev->stats.tx_fifo_errors++;
|
|
}
|
|
|
|
if (priv->tx_tail != old_tx_tail)
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void _sc92031_rx_tasklet_error(struct net_device *dev,
|
|
u32 rx_status, unsigned rx_size)
|
|
{
|
|
if(rx_size > (MAX_ETH_FRAME_SIZE + 4) || rx_size < 16) {
|
|
dev->stats.rx_errors++;
|
|
dev->stats.rx_length_errors++;
|
|
}
|
|
|
|
if (!(rx_status & RxStatesOK)) {
|
|
dev->stats.rx_errors++;
|
|
|
|
if (rx_status & (RxHugeFrame | RxSmallFrame))
|
|
dev->stats.rx_length_errors++;
|
|
|
|
if (rx_status & RxBadAlign)
|
|
dev->stats.rx_frame_errors++;
|
|
|
|
if (!(rx_status & RxCRCOK))
|
|
dev->stats.rx_crc_errors++;
|
|
} else {
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
priv->rx_loss++;
|
|
}
|
|
}
|
|
|
|
static void _sc92031_rx_tasklet(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
dma_addr_t rx_ring_head;
|
|
unsigned rx_len;
|
|
unsigned rx_ring_offset;
|
|
void *rx_ring = priv->rx_ring;
|
|
|
|
rx_ring_head = ioread32(port_base + RxBufWPtr);
|
|
rmb();
|
|
|
|
/* rx_ring_head is only 17 bits in the RxBufWPtr register.
|
|
* we need to change it to 32 bits physical address
|
|
*/
|
|
rx_ring_head &= (dma_addr_t)(RX_BUF_LEN - 1);
|
|
rx_ring_head |= priv->rx_ring_dma_addr & ~(dma_addr_t)(RX_BUF_LEN - 1);
|
|
if (rx_ring_head < priv->rx_ring_dma_addr)
|
|
rx_ring_head += RX_BUF_LEN;
|
|
|
|
if (rx_ring_head >= priv->rx_ring_tail)
|
|
rx_len = rx_ring_head - priv->rx_ring_tail;
|
|
else
|
|
rx_len = RX_BUF_LEN - (priv->rx_ring_tail - rx_ring_head);
|
|
|
|
if (!rx_len)
|
|
return;
|
|
|
|
if (unlikely(rx_len > RX_BUF_LEN)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: rx packets length > rx buffer\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
|
|
rx_ring_offset = (priv->rx_ring_tail - priv->rx_ring_dma_addr) % RX_BUF_LEN;
|
|
|
|
while (rx_len) {
|
|
u32 rx_status;
|
|
unsigned rx_size, rx_size_align, pkt_size;
|
|
struct sk_buff *skb;
|
|
|
|
rx_status = le32_to_cpup((__le32 *)(rx_ring + rx_ring_offset));
|
|
rmb();
|
|
|
|
rx_size = rx_status >> 20;
|
|
rx_size_align = (rx_size + 3) & ~3; // for 4 bytes aligned
|
|
pkt_size = rx_size - 4; // Omit the four octet CRC from the length.
|
|
|
|
rx_ring_offset = (rx_ring_offset + 4) % RX_BUF_LEN;
|
|
|
|
if (unlikely(rx_status == 0 ||
|
|
rx_size > (MAX_ETH_FRAME_SIZE + 4) ||
|
|
rx_size < 16 ||
|
|
!(rx_status & RxStatesOK))) {
|
|
_sc92031_rx_tasklet_error(dev, rx_status, rx_size);
|
|
break;
|
|
}
|
|
|
|
if (unlikely(rx_size_align + 4 > rx_len)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
|
|
break;
|
|
}
|
|
|
|
rx_len -= rx_size_align + 4;
|
|
|
|
skb = netdev_alloc_skb_ip_align(dev, pkt_size);
|
|
if (unlikely(!skb)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
|
|
dev->name, pkt_size);
|
|
goto next;
|
|
}
|
|
|
|
if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
|
|
skb_put_data(skb, rx_ring + rx_ring_offset,
|
|
RX_BUF_LEN - rx_ring_offset);
|
|
skb_put_data(skb, rx_ring,
|
|
pkt_size - (RX_BUF_LEN - rx_ring_offset));
|
|
} else {
|
|
skb_put_data(skb, rx_ring + rx_ring_offset, pkt_size);
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
|
|
dev->stats.rx_bytes += pkt_size;
|
|
dev->stats.rx_packets++;
|
|
|
|
if (rx_status & Rx_Multicast)
|
|
dev->stats.multicast++;
|
|
|
|
next:
|
|
rx_ring_offset = (rx_ring_offset + rx_size_align) % RX_BUF_LEN;
|
|
}
|
|
mb();
|
|
|
|
priv->rx_ring_tail = rx_ring_head;
|
|
iowrite32(priv->rx_ring_tail, port_base + RxBufRPtr);
|
|
}
|
|
|
|
static void _sc92031_link_tasklet(struct net_device *dev)
|
|
{
|
|
if (_sc92031_check_media(dev))
|
|
netif_wake_queue(dev);
|
|
else {
|
|
netif_stop_queue(dev);
|
|
dev->stats.tx_carrier_errors++;
|
|
}
|
|
}
|
|
|
|
static void sc92031_tasklet(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 intr_status, intr_mask;
|
|
|
|
intr_status = priv->intr_status;
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
if (unlikely(!netif_running(dev)))
|
|
goto out;
|
|
|
|
if (intr_status & TxOK)
|
|
_sc92031_tx_tasklet(dev);
|
|
|
|
if (intr_status & RxOK)
|
|
_sc92031_rx_tasklet(dev);
|
|
|
|
if (intr_status & RxOverflow)
|
|
dev->stats.rx_errors++;
|
|
|
|
if (intr_status & TimeOut) {
|
|
dev->stats.rx_errors++;
|
|
dev->stats.rx_length_errors++;
|
|
}
|
|
|
|
if (intr_status & (LinkFail | LinkOK))
|
|
_sc92031_link_tasklet(dev);
|
|
|
|
out:
|
|
intr_mask = atomic_read(&priv->intr_mask);
|
|
rmb();
|
|
|
|
iowrite32(intr_mask, port_base + IntrMask);
|
|
|
|
spin_unlock(&priv->lock);
|
|
}
|
|
|
|
static irqreturn_t sc92031_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 intr_status, intr_mask;
|
|
|
|
/* mask interrupts before clearing IntrStatus */
|
|
iowrite32(0, port_base + IntrMask);
|
|
_sc92031_dummy_read(port_base);
|
|
|
|
intr_status = ioread32(port_base + IntrStatus);
|
|
if (unlikely(intr_status == 0xffffffff))
|
|
return IRQ_NONE; // hardware has gone missing
|
|
|
|
intr_status &= IntrBits;
|
|
if (!intr_status)
|
|
goto out_none;
|
|
|
|
priv->intr_status = intr_status;
|
|
tasklet_schedule(&priv->tasklet);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
out_none:
|
|
intr_mask = atomic_read(&priv->intr_mask);
|
|
rmb();
|
|
|
|
iowrite32(intr_mask, port_base + IntrMask);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct net_device_stats *sc92031_get_stats(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
// FIXME I do not understand what is this trying to do.
|
|
if (netif_running(dev)) {
|
|
int temp;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
/* Update the error count. */
|
|
temp = (ioread32(port_base + RxStatus0) >> 16) & 0xffff;
|
|
|
|
if (temp == 0xffff) {
|
|
priv->rx_value += temp;
|
|
dev->stats.rx_fifo_errors = priv->rx_value;
|
|
} else
|
|
dev->stats.rx_fifo_errors = temp + priv->rx_value;
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
return &dev->stats;
|
|
}
|
|
|
|
static netdev_tx_t sc92031_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
unsigned len;
|
|
unsigned entry;
|
|
u32 tx_status;
|
|
|
|
if (unlikely(skb->len > TX_BUF_SIZE)) {
|
|
dev->stats.tx_dropped++;
|
|
goto out;
|
|
}
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
if (unlikely(!netif_carrier_ok(dev))) {
|
|
dev->stats.tx_dropped++;
|
|
goto out_unlock;
|
|
}
|
|
|
|
BUG_ON(priv->tx_head - priv->tx_tail >= NUM_TX_DESC);
|
|
|
|
entry = priv->tx_head++ % NUM_TX_DESC;
|
|
|
|
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
|
|
|
|
len = skb->len;
|
|
if (len < ETH_ZLEN) {
|
|
memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
|
|
0, ETH_ZLEN - len);
|
|
len = ETH_ZLEN;
|
|
}
|
|
|
|
wmb();
|
|
|
|
if (len < 100)
|
|
tx_status = len;
|
|
else if (len < 300)
|
|
tx_status = 0x30000 | len;
|
|
else
|
|
tx_status = 0x50000 | len;
|
|
|
|
iowrite32(priv->tx_bufs_dma_addr + entry * TX_BUF_SIZE,
|
|
port_base + TxAddr0 + entry * 4);
|
|
iowrite32(tx_status, port_base + TxStatus0 + entry * 4);
|
|
|
|
if (priv->tx_head - priv->tx_tail >= NUM_TX_DESC)
|
|
netif_stop_queue(dev);
|
|
|
|
out_unlock:
|
|
spin_unlock(&priv->lock);
|
|
|
|
out:
|
|
dev_consume_skb_any(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int sc92031_open(struct net_device *dev)
|
|
{
|
|
int err;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
struct pci_dev *pdev = priv->pdev;
|
|
|
|
priv->rx_ring = pci_alloc_consistent(pdev, RX_BUF_LEN,
|
|
&priv->rx_ring_dma_addr);
|
|
if (unlikely(!priv->rx_ring)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_rx_ring;
|
|
}
|
|
|
|
priv->tx_bufs = pci_alloc_consistent(pdev, TX_BUF_TOT_LEN,
|
|
&priv->tx_bufs_dma_addr);
|
|
if (unlikely(!priv->tx_bufs)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_tx_bufs;
|
|
}
|
|
priv->tx_head = priv->tx_tail = 0;
|
|
|
|
err = request_irq(pdev->irq, sc92031_interrupt,
|
|
IRQF_SHARED, dev->name, dev);
|
|
if (unlikely(err < 0))
|
|
goto out_request_irq;
|
|
|
|
priv->pm_config = 0;
|
|
|
|
/* Interrupts already disabled by sc92031_stop or sc92031_probe */
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_reset(dev);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_start_queue(dev);
|
|
else
|
|
netif_tx_disable(dev);
|
|
|
|
return 0;
|
|
|
|
out_request_irq:
|
|
pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
|
|
priv->tx_bufs_dma_addr);
|
|
out_alloc_tx_bufs:
|
|
pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
|
|
priv->rx_ring_dma_addr);
|
|
out_alloc_rx_ring:
|
|
return err;
|
|
}
|
|
|
|
static int sc92031_stop(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
struct pci_dev *pdev = priv->pdev;
|
|
|
|
netif_tx_disable(dev);
|
|
|
|
/* Disable interrupts, stop Tx and Rx. */
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
_sc92031_tx_clear(dev);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
free_irq(pdev->irq, dev);
|
|
pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
|
|
priv->tx_bufs_dma_addr);
|
|
pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
|
|
priv->rx_ring_dma_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sc92031_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_set_mar(dev);
|
|
_sc92031_set_rx_config(dev);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
static void sc92031_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask.*/
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
priv->tx_timeouts++;
|
|
|
|
_sc92031_reset(dev);
|
|
|
|
spin_unlock(&priv->lock);
|
|
|
|
/* enable interrupts */
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void sc92031_poll_controller(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
const int irq = priv->pdev->irq;
|
|
|
|
disable_irq(irq);
|
|
if (sc92031_interrupt(irq, dev) != IRQ_NONE)
|
|
sc92031_tasklet((unsigned long)dev);
|
|
enable_irq(irq);
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
sc92031_ethtool_get_link_ksettings(struct net_device *dev,
|
|
struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u8 phy_address;
|
|
u32 phy_ctrl;
|
|
u16 output_status;
|
|
u32 supported, advertising;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
phy_address = ioread32(port_base + Miicmd1) >> 27;
|
|
phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
|
|
output_status = _sc92031_mii_read(port_base, MII_OutputStatus);
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
|
|
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
|
|
| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII;
|
|
|
|
advertising = ADVERTISED_TP | ADVERTISED_MII;
|
|
|
|
if ((phy_ctrl & (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
|
|
== (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
|
|
advertising |= ADVERTISED_Autoneg;
|
|
|
|
if ((phy_ctrl & PhyCtrlSpd10) == PhyCtrlSpd10)
|
|
advertising |= ADVERTISED_10baseT_Half;
|
|
|
|
if ((phy_ctrl & (PhyCtrlSpd10 | PhyCtrlDux))
|
|
== (PhyCtrlSpd10 | PhyCtrlDux))
|
|
advertising |= ADVERTISED_10baseT_Full;
|
|
|
|
if ((phy_ctrl & PhyCtrlSpd100) == PhyCtrlSpd100)
|
|
advertising |= ADVERTISED_100baseT_Half;
|
|
|
|
if ((phy_ctrl & (PhyCtrlSpd100 | PhyCtrlDux))
|
|
== (PhyCtrlSpd100 | PhyCtrlDux))
|
|
advertising |= ADVERTISED_100baseT_Full;
|
|
|
|
if (phy_ctrl & PhyCtrlAne)
|
|
advertising |= ADVERTISED_Autoneg;
|
|
|
|
cmd->base.speed = (output_status & 0x2) ? SPEED_100 : SPEED_10;
|
|
cmd->base.duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
cmd->base.port = PORT_MII;
|
|
cmd->base.phy_address = phy_address;
|
|
cmd->base.autoneg = (phy_ctrl & PhyCtrlAne) ?
|
|
AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
|
|
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
|
|
supported);
|
|
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
|
|
advertising);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sc92031_ethtool_set_link_ksettings(struct net_device *dev,
|
|
const struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 speed = cmd->base.speed;
|
|
u32 phy_ctrl;
|
|
u32 old_phy_ctrl;
|
|
u32 advertising;
|
|
|
|
ethtool_convert_link_mode_to_legacy_u32(&advertising,
|
|
cmd->link_modes.advertising);
|
|
|
|
if (!(speed == SPEED_10 || speed == SPEED_100))
|
|
return -EINVAL;
|
|
if (!(cmd->base.duplex == DUPLEX_HALF ||
|
|
cmd->base.duplex == DUPLEX_FULL))
|
|
return -EINVAL;
|
|
if (!(cmd->base.port == PORT_MII))
|
|
return -EINVAL;
|
|
if (!(cmd->base.phy_address == 0x1f))
|
|
return -EINVAL;
|
|
if (!(cmd->base.autoneg == AUTONEG_DISABLE ||
|
|
cmd->base.autoneg == AUTONEG_ENABLE))
|
|
return -EINVAL;
|
|
|
|
if (cmd->base.autoneg == AUTONEG_ENABLE) {
|
|
if (!(advertising & (ADVERTISED_Autoneg
|
|
| ADVERTISED_100baseT_Full
|
|
| ADVERTISED_100baseT_Half
|
|
| ADVERTISED_10baseT_Full
|
|
| ADVERTISED_10baseT_Half)))
|
|
return -EINVAL;
|
|
|
|
phy_ctrl = PhyCtrlAne;
|
|
|
|
// FIXME: I'm not sure what the original code was trying to do
|
|
if (advertising & ADVERTISED_Autoneg)
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
|
|
if (advertising & ADVERTISED_100baseT_Full)
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
|
|
if (advertising & ADVERTISED_100baseT_Half)
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
if (advertising & ADVERTISED_10baseT_Full)
|
|
phy_ctrl |= PhyCtrlSpd10 | PhyCtrlDux;
|
|
if (advertising & ADVERTISED_10baseT_Half)
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
} else {
|
|
// FIXME: Whole branch guessed
|
|
phy_ctrl = 0;
|
|
|
|
if (speed == SPEED_10)
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
else /* cmd->speed == SPEED_100 */
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
|
|
if (cmd->base.duplex == DUPLEX_FULL)
|
|
phy_ctrl |= PhyCtrlDux;
|
|
}
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
old_phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
phy_ctrl |= old_phy_ctrl & ~(PhyCtrlAne | PhyCtrlDux
|
|
| PhyCtrlSpd100 | PhyCtrlSpd10);
|
|
if (phy_ctrl != old_phy_ctrl)
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sc92031_ethtool_get_wol(struct net_device *dev,
|
|
struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 pm_config;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
pm_config = ioread32(port_base + PMConfig);
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
// FIXME: Guessed
|
|
wolinfo->supported = WAKE_PHY | WAKE_MAGIC
|
|
| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
|
|
wolinfo->wolopts = 0;
|
|
|
|
if (pm_config & PM_LinkUp)
|
|
wolinfo->wolopts |= WAKE_PHY;
|
|
|
|
if (pm_config & PM_Magic)
|
|
wolinfo->wolopts |= WAKE_MAGIC;
|
|
|
|
if (pm_config & PM_WakeUp)
|
|
// FIXME: Guessed
|
|
wolinfo->wolopts |= WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
|
|
}
|
|
|
|
static int sc92031_ethtool_set_wol(struct net_device *dev,
|
|
struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 pm_config;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
pm_config = ioread32(port_base + PMConfig)
|
|
& ~(PM_LinkUp | PM_Magic | PM_WakeUp);
|
|
|
|
if (wolinfo->wolopts & WAKE_PHY)
|
|
pm_config |= PM_LinkUp;
|
|
|
|
if (wolinfo->wolopts & WAKE_MAGIC)
|
|
pm_config |= PM_Magic;
|
|
|
|
// FIXME: Guessed
|
|
if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
|
|
pm_config |= PM_WakeUp;
|
|
|
|
priv->pm_config = pm_config;
|
|
iowrite32(pm_config, port_base + PMConfig);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc92031_ethtool_nway_reset(struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u16 bmcr;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
bmcr = _sc92031_mii_read(port_base, MII_BMCR);
|
|
if (!(bmcr & BMCR_ANENABLE)) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
_sc92031_mii_write(port_base, MII_BMCR, bmcr | BMCR_ANRESTART);
|
|
|
|
out:
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const char sc92031_ethtool_stats_strings[SILAN_STATS_NUM][ETH_GSTRING_LEN] = {
|
|
"tx_timeout",
|
|
"rx_loss",
|
|
};
|
|
|
|
static void sc92031_ethtool_get_strings(struct net_device *dev,
|
|
u32 stringset, u8 *data)
|
|
{
|
|
if (stringset == ETH_SS_STATS)
|
|
memcpy(data, sc92031_ethtool_stats_strings,
|
|
SILAN_STATS_NUM * ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static int sc92031_ethtool_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return SILAN_STATS_NUM;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void sc92031_ethtool_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
data[0] = priv->tx_timeouts;
|
|
data[1] = priv->rx_loss;
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
static const struct ethtool_ops sc92031_ethtool_ops = {
|
|
.get_wol = sc92031_ethtool_get_wol,
|
|
.set_wol = sc92031_ethtool_set_wol,
|
|
.nway_reset = sc92031_ethtool_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_strings = sc92031_ethtool_get_strings,
|
|
.get_sset_count = sc92031_ethtool_get_sset_count,
|
|
.get_ethtool_stats = sc92031_ethtool_get_ethtool_stats,
|
|
.get_link_ksettings = sc92031_ethtool_get_link_ksettings,
|
|
.set_link_ksettings = sc92031_ethtool_set_link_ksettings,
|
|
};
|
|
|
|
|
|
static const struct net_device_ops sc92031_netdev_ops = {
|
|
.ndo_get_stats = sc92031_get_stats,
|
|
.ndo_start_xmit = sc92031_start_xmit,
|
|
.ndo_open = sc92031_open,
|
|
.ndo_stop = sc92031_stop,
|
|
.ndo_set_rx_mode = sc92031_set_multicast_list,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_tx_timeout = sc92031_tx_timeout,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = sc92031_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
static int sc92031_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
int err;
|
|
void __iomem* port_base;
|
|
struct net_device *dev;
|
|
struct sc92031_priv *priv;
|
|
u32 mac0, mac1;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (unlikely(err < 0))
|
|
goto out_enable_device;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (unlikely(err < 0))
|
|
goto out_set_dma_mask;
|
|
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (unlikely(err < 0))
|
|
goto out_set_dma_mask;
|
|
|
|
err = pci_request_regions(pdev, SC92031_NAME);
|
|
if (unlikely(err < 0))
|
|
goto out_request_regions;
|
|
|
|
port_base = pci_iomap(pdev, SC92031_USE_PIO, 0);
|
|
if (unlikely(!port_base)) {
|
|
err = -EIO;
|
|
goto out_iomap;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(struct sc92031_priv));
|
|
if (unlikely(!dev)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_etherdev;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* faked with skb_copy_and_csum_dev */
|
|
dev->features = NETIF_F_SG | NETIF_F_HIGHDMA |
|
|
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
|
|
|
|
dev->netdev_ops = &sc92031_netdev_ops;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->ethtool_ops = &sc92031_ethtool_ops;
|
|
|
|
priv = netdev_priv(dev);
|
|
spin_lock_init(&priv->lock);
|
|
priv->port_base = port_base;
|
|
priv->pdev = pdev;
|
|
tasklet_init(&priv->tasklet, sc92031_tasklet, (unsigned long)dev);
|
|
/* Fudge tasklet count so the call to sc92031_enable_interrupts at
|
|
* sc92031_open will work correctly */
|
|
tasklet_disable_nosync(&priv->tasklet);
|
|
|
|
/* PCI PM Wakeup */
|
|
iowrite32((~PM_LongWF & ~PM_LWPTN) | PM_Enable, port_base + PMConfig);
|
|
|
|
mac0 = ioread32(port_base + MAC0);
|
|
mac1 = ioread32(port_base + MAC0 + 4);
|
|
dev->dev_addr[0] = mac0 >> 24;
|
|
dev->dev_addr[1] = mac0 >> 16;
|
|
dev->dev_addr[2] = mac0 >> 8;
|
|
dev->dev_addr[3] = mac0;
|
|
dev->dev_addr[4] = mac1 >> 8;
|
|
dev->dev_addr[5] = mac1;
|
|
|
|
err = register_netdev(dev);
|
|
if (err < 0)
|
|
goto out_register_netdev;
|
|
|
|
printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
|
|
(long)pci_resource_start(pdev, SC92031_USE_PIO), dev->dev_addr,
|
|
pdev->irq);
|
|
|
|
return 0;
|
|
|
|
out_register_netdev:
|
|
free_netdev(dev);
|
|
out_alloc_etherdev:
|
|
pci_iounmap(pdev, port_base);
|
|
out_iomap:
|
|
pci_release_regions(pdev);
|
|
out_request_regions:
|
|
out_set_dma_mask:
|
|
pci_disable_device(pdev);
|
|
out_enable_device:
|
|
return err;
|
|
}
|
|
|
|
static void sc92031_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem* port_base = priv->port_base;
|
|
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
pci_iounmap(pdev, port_base);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int sc92031_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
pci_save_state(pdev);
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
netif_device_detach(dev);
|
|
|
|
/* Disable interrupts, stop Tx and Rx. */
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
_sc92031_tx_clear(dev);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
out:
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc92031_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
pci_restore_state(pdev);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
/* Interrupts already disabled by sc92031_suspend */
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_reset(dev);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
netif_device_attach(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_wake_queue(dev);
|
|
else
|
|
netif_tx_disable(dev);
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id sc92031_pci_device_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
|
|
{ PCI_DEVICE(0x1088, 0x2031) },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
|
|
|
|
static struct pci_driver sc92031_pci_driver = {
|
|
.name = SC92031_NAME,
|
|
.id_table = sc92031_pci_device_id_table,
|
|
.probe = sc92031_probe,
|
|
.remove = sc92031_remove,
|
|
.suspend = sc92031_suspend,
|
|
.resume = sc92031_resume,
|
|
};
|
|
|
|
module_pci_driver(sc92031_pci_driver);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Cesar Eduardo Barros <cesarb@cesarb.net>");
|
|
MODULE_DESCRIPTION("Silan SC92031 PCI Fast Ethernet Adapter driver");
|