259b93b21a
Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
362 lines
9.2 KiB
C
362 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Voltage regulation driver for active-semi ACT8945A PMIC
|
|
*
|
|
* Copyright (C) 2015 Atmel Corporation
|
|
*
|
|
* Author: Wenyou Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
|
|
|
|
/*
|
|
* ACT8945A Global Register Map.
|
|
*/
|
|
#define ACT8945A_SYS_MODE 0x00
|
|
#define ACT8945A_SYS_CTRL 0x01
|
|
#define ACT8945A_SYS_UNLK_REGS 0x0b
|
|
#define ACT8945A_DCDC1_VSET1 0x20
|
|
#define ACT8945A_DCDC1_VSET2 0x21
|
|
#define ACT8945A_DCDC1_CTRL 0x22
|
|
#define ACT8945A_DCDC1_SUS 0x24
|
|
#define ACT8945A_DCDC2_VSET1 0x30
|
|
#define ACT8945A_DCDC2_VSET2 0x31
|
|
#define ACT8945A_DCDC2_CTRL 0x32
|
|
#define ACT8945A_DCDC2_SUS 0x34
|
|
#define ACT8945A_DCDC3_VSET1 0x40
|
|
#define ACT8945A_DCDC3_VSET2 0x41
|
|
#define ACT8945A_DCDC3_CTRL 0x42
|
|
#define ACT8945A_DCDC3_SUS 0x44
|
|
#define ACT8945A_LDO1_VSET 0x50
|
|
#define ACT8945A_LDO1_CTRL 0x51
|
|
#define ACT8945A_LDO1_SUS 0x52
|
|
#define ACT8945A_LDO2_VSET 0x54
|
|
#define ACT8945A_LDO2_CTRL 0x55
|
|
#define ACT8945A_LDO2_SUS 0x56
|
|
#define ACT8945A_LDO3_VSET 0x60
|
|
#define ACT8945A_LDO3_CTRL 0x61
|
|
#define ACT8945A_LDO3_SUS 0x62
|
|
#define ACT8945A_LDO4_VSET 0x64
|
|
#define ACT8945A_LDO4_CTRL 0x65
|
|
#define ACT8945A_LDO4_SUS 0x66
|
|
|
|
/*
|
|
* Field Definitions.
|
|
*/
|
|
#define ACT8945A_ENA 0x80 /* ON - [7] */
|
|
#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */
|
|
|
|
/*
|
|
* ACT8945A Voltage Number
|
|
*/
|
|
#define ACT8945A_VOLTAGE_NUM 64
|
|
|
|
enum {
|
|
ACT8945A_ID_DCDC1,
|
|
ACT8945A_ID_DCDC2,
|
|
ACT8945A_ID_DCDC3,
|
|
ACT8945A_ID_LDO1,
|
|
ACT8945A_ID_LDO2,
|
|
ACT8945A_ID_LDO3,
|
|
ACT8945A_ID_LDO4,
|
|
ACT8945A_ID_MAX,
|
|
};
|
|
|
|
struct act8945a_pmic {
|
|
struct regmap *regmap;
|
|
u32 op_mode[ACT8945A_ID_MAX];
|
|
};
|
|
|
|
static const struct linear_range act8945a_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
|
|
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
|
|
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
|
};
|
|
|
|
static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
|
|
{
|
|
struct regmap *regmap = rdev->regmap;
|
|
int id = rdev_get_id(rdev);
|
|
int reg, val;
|
|
|
|
switch (id) {
|
|
case ACT8945A_ID_DCDC1:
|
|
reg = ACT8945A_DCDC1_SUS;
|
|
val = 0xa8;
|
|
break;
|
|
case ACT8945A_ID_DCDC2:
|
|
reg = ACT8945A_DCDC2_SUS;
|
|
val = 0xa8;
|
|
break;
|
|
case ACT8945A_ID_DCDC3:
|
|
reg = ACT8945A_DCDC3_SUS;
|
|
val = 0xa8;
|
|
break;
|
|
case ACT8945A_ID_LDO1:
|
|
reg = ACT8945A_LDO1_SUS;
|
|
val = 0xe8;
|
|
break;
|
|
case ACT8945A_ID_LDO2:
|
|
reg = ACT8945A_LDO2_SUS;
|
|
val = 0xe8;
|
|
break;
|
|
case ACT8945A_ID_LDO3:
|
|
reg = ACT8945A_LDO3_SUS;
|
|
val = 0xe8;
|
|
break;
|
|
case ACT8945A_ID_LDO4:
|
|
reg = ACT8945A_LDO4_SUS;
|
|
val = 0xe8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (enable)
|
|
val |= BIT(4);
|
|
|
|
/*
|
|
* Ask the PMIC to enable/disable this output when entering hibernate
|
|
* mode.
|
|
*/
|
|
return regmap_write(regmap, reg, val);
|
|
}
|
|
|
|
static int act8945a_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
return act8945a_set_suspend_state(rdev, true);
|
|
}
|
|
|
|
static int act8945a_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
return act8945a_set_suspend_state(rdev, false);
|
|
}
|
|
|
|
static unsigned int act8945a_of_map_mode(unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case ACT8945A_REGULATOR_MODE_FIXED:
|
|
case ACT8945A_REGULATOR_MODE_NORMAL:
|
|
return REGULATOR_MODE_NORMAL;
|
|
case ACT8945A_REGULATOR_MODE_LOWPOWER:
|
|
return REGULATOR_MODE_STANDBY;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
|
|
struct regmap *regmap = rdev->regmap;
|
|
int id = rdev_get_id(rdev);
|
|
int reg, ret, val = 0;
|
|
|
|
switch (id) {
|
|
case ACT8945A_ID_DCDC1:
|
|
reg = ACT8945A_DCDC1_CTRL;
|
|
break;
|
|
case ACT8945A_ID_DCDC2:
|
|
reg = ACT8945A_DCDC2_CTRL;
|
|
break;
|
|
case ACT8945A_ID_DCDC3:
|
|
reg = ACT8945A_DCDC3_CTRL;
|
|
break;
|
|
case ACT8945A_ID_LDO1:
|
|
reg = ACT8945A_LDO1_CTRL;
|
|
break;
|
|
case ACT8945A_ID_LDO2:
|
|
reg = ACT8945A_LDO2_CTRL;
|
|
break;
|
|
case ACT8945A_ID_LDO3:
|
|
reg = ACT8945A_LDO3_CTRL;
|
|
break;
|
|
case ACT8945A_ID_LDO4:
|
|
reg = ACT8945A_LDO4_CTRL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_STANDBY:
|
|
if (id > ACT8945A_ID_DCDC3)
|
|
val = BIT(5);
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
if (id <= ACT8945A_ID_DCDC3)
|
|
val = BIT(5);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(regmap, reg, BIT(5), val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
act8945a->op_mode[id] = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
|
|
int id = rdev_get_id(rdev);
|
|
|
|
if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
|
|
return -EINVAL;
|
|
|
|
return act8945a->op_mode[id];
|
|
}
|
|
|
|
static const struct regulator_ops act8945a_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.set_mode = act8945a_set_mode,
|
|
.get_mode = act8945a_get_mode,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_enable = act8945a_set_suspend_enable,
|
|
.set_suspend_disable = act8945a_set_suspend_disable,
|
|
};
|
|
|
|
#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
|
|
[_family##_ID_##_id] = { \
|
|
.name = _name, \
|
|
.supply_name = _supply, \
|
|
.of_match = of_match_ptr("REG_"#_id), \
|
|
.of_map_mode = act8945a_of_map_mode, \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.id = _family##_ID_##_id, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.ops = &act8945a_ops, \
|
|
.n_voltages = ACT8945A_VOLTAGE_NUM, \
|
|
.linear_ranges = act8945a_voltage_ranges, \
|
|
.n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \
|
|
.vsel_reg = _family##_##_id##_##_vsel_reg, \
|
|
.vsel_mask = ACT8945A_VSEL_MASK, \
|
|
.enable_reg = _family##_##_id##_CTRL, \
|
|
.enable_mask = ACT8945A_ENA, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
static const struct regulator_desc act8945a_regulators[] = {
|
|
ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"),
|
|
ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"),
|
|
ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"),
|
|
ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
|
|
ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
|
|
ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
|
|
ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
|
|
};
|
|
|
|
static const struct regulator_desc act8945a_alt_regulators[] = {
|
|
ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"),
|
|
ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"),
|
|
ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"),
|
|
ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
|
|
ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
|
|
ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
|
|
ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
|
|
};
|
|
|
|
static int act8945a_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct regulator_config config = { };
|
|
const struct regulator_desc *regulators;
|
|
struct act8945a_pmic *act8945a;
|
|
struct regulator_dev *rdev;
|
|
int i, num_regulators;
|
|
bool voltage_select;
|
|
|
|
act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL);
|
|
if (!act8945a)
|
|
return -ENOMEM;
|
|
|
|
act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!act8945a->regmap) {
|
|
dev_err(&pdev->dev,
|
|
"could not retrieve regmap from parent device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
voltage_select = of_property_read_bool(pdev->dev.parent->of_node,
|
|
"active-semi,vsel-high");
|
|
|
|
if (voltage_select) {
|
|
regulators = act8945a_alt_regulators;
|
|
num_regulators = ARRAY_SIZE(act8945a_alt_regulators);
|
|
} else {
|
|
regulators = act8945a_regulators;
|
|
num_regulators = ARRAY_SIZE(act8945a_regulators);
|
|
}
|
|
|
|
config.dev = &pdev->dev;
|
|
config.dev->of_node = pdev->dev.parent->of_node;
|
|
config.driver_data = act8945a;
|
|
for (i = 0; i < num_regulators; i++) {
|
|
rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register %s regulator\n",
|
|
regulators[i].name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, act8945a);
|
|
|
|
/* Unlock expert registers. */
|
|
return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
|
|
}
|
|
|
|
static int __maybe_unused act8945a_suspend(struct device *pdev)
|
|
{
|
|
struct act8945a_pmic *act8945a = dev_get_drvdata(pdev);
|
|
|
|
/*
|
|
* Ask the PMIC to enter the suspend mode on the next PWRHLD
|
|
* transition.
|
|
*/
|
|
return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL);
|
|
|
|
static void act8945a_pmic_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct act8945a_pmic *act8945a = platform_get_drvdata(pdev);
|
|
|
|
/*
|
|
* Ask the PMIC to shutdown everything on the next PWRHLD transition.
|
|
*/
|
|
regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x0);
|
|
}
|
|
|
|
static struct platform_driver act8945a_pmic_driver = {
|
|
.driver = {
|
|
.name = "act8945a-regulator",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.pm = &act8945a_pm,
|
|
},
|
|
.probe = act8945a_pmic_probe,
|
|
.shutdown = act8945a_pmic_shutdown,
|
|
};
|
|
module_platform_driver(act8945a_pmic_driver);
|
|
|
|
MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver");
|
|
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
|
|
MODULE_LICENSE("GPL");
|