iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/phy
History
Michael Grzeschik 86ffe920e6 net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset 
According to the Datasheet this bit should be 0 (Normal operation) in
default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
link. This patch sets FORCE_LINK_GOOD to the default value after
resetting the phy.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17 11:36:18 +01:00
..
adin.c
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
2019-09-16 22:02:45 +02:00
amd.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
aquantia_hwmon.c
net: phy: aquantia: add hwmon support
2019-02-25 14:16:22 -08:00
aquantia_main.c
net: phy: aquantia: add suspend / resume ops for AQR105
2019-12-26 15:14:53 -08:00
aquantia.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
at803x.c
net: phy: at803x: remove config_init for AR9331
2019-11-06 21:42:06 -08:00
ax88796b.c
net: phy: rename Asix Electronics PHY driver
2019-06-09 13:24:17 -07:00
bcm7xxx.c
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
2019-10-18 10:00:07 -07:00
bcm63xx.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm87xx.c
net: phy: bcm87xx: improve bcm87xx_config_init and feature detection
2019-05-26 21:56:41 -07:00
bcm-cygnus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
bcm-phy-lib.c
net: phy: Prepare for moving Omega out of bcm7xxx
2019-03-21 13:41:26 -07:00
bcm-phy-lib.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
broadcom.c
net: phy: broadcom: add 1000Base-X support for BCM54616S
2019-10-23 20:42:52 -07:00
cicada.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
cortina.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
davicom.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
dp83tc811.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83640_reg.h
…
dp83640.c
dp83640: Reject requests to enable time stamping on both edges.
2019-11-15 12:48:32 -08:00
dp83822.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83848.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
dp83867.c
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
2020-01-17 11:36:18 +01:00
dp83869.c
net: phy: dp83869: Fix return paths to return proper values
2019-11-26 14:42:55 -08:00
et1011c.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
fixed_phy.c
net: phy: fixed_phy: print gpio error only if gpio node is present
2019-07-30 09:54:45 -07:00
icplus.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
intel-xway.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
Kconfig
net: phy: DP83822: Update Kconfig with DP83825I support
2020-01-10 23:32:54 -08:00
lxt.c
net: phy: lxt: Add suspend/resume support to LXT971 and LXT973.
2019-05-23 09:19:21 -07:00
Makefile
net: phy: dp83869: Add TI dp83869 phy
2019-11-14 17:42:43 -08:00
marvell10g.c
net: phy: marvell10g: add SFP+ support
2019-11-18 16:56:13 -08:00
marvell.c
net: phy: marvell: add downshift support for 88E1145
2019-10-30 17:35:56 -07:00
mdio_bus.c
mdio_bus: don't use managed reset-controller
2019-11-25 10:43:40 -08:00
mdio_device.c
net: phy: allow for reset line to be tied to a sleepy GPIO controller
2019-10-04 18:07:45 -07:00
mdio-aspeed.c
net: phy: Add mdio-aspeed
2019-08-02 17:56:28 -07:00
mdio-bcm-iproc.c
phy: mdio-bcm-iproc: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-bcm-unimac.c
net: phy: mdio-bcm-unimac: remove redundant !timeout check
2019-03-27 14:27:30 -07:00
mdio-bitbang.c
…
mdio-boardinfo.c
…
mdio-boardinfo.h
…
mdio-cavium.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-cavium.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
mdio-gpio.c
…
mdio-hisi-femac.c
phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-i2c.c
…
mdio-i2c.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
mdio-moxart.c
phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-mscc-miim.c
…
mdio-mux-bcm-iproc.c
…
mdio-mux-gpio.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-mux-meson-g12a.c
phy: mdio-mux-meson-g12a: use devm_platform_ioremap_resource() to simplify code
2019-08-28 14:51:00 -07:00
mdio-mux-mmioreg.c
…
mdio-mux-multiplexer.c
drivers: net: phy: mdio-mux: Add support for Generic Mux controls
2019-02-27 12:52:20 -08:00
mdio-mux.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-octeon.c
net: phy: Add SDPX tag based on COPYING file
2019-01-22 20:59:18 -08:00
mdio-sun4i.c
phy: mdio-sun4i: add missed regulator_disable in remove
2019-11-18 17:22:40 -08:00
mdio-thunder.c
phy: mdio-thunder: add missed pci_release_regions in remove
2019-12-06 12:05:06 -08:00
mdio-xgene.c
net: phy: xgene: use devm_platform_ioremap_resource() to simplify code
2019-08-01 13:10:34 -04:00
mdio-xgene.h
net: phy: Use the correct style for SPDX License Identifier
2019-11-27 11:25:48 -08:00
meson-gxl.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
micrel.c
net: phy: micrel: Update KSZ87xx PHY name
2019-10-17 16:31:52 -07:00
microchip_t1.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
microchip.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
mscc.c
mscc.c: fix semicolon.cocci warnings
2019-11-16 13:13:26 -08:00
national.c
net/phy: fix DP83865 10 Mbps HDX loopback disable function
2019-09-21 18:21:52 -07:00
nxp-tja11xx.c
net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO()
2019-05-29 22:02:18 -07:00
phy_device.c
net: phy: ensure that phy IDs are correctly typed
2019-12-20 21:48:06 -08:00
phy_led_triggers.c
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()
2019-07-31 18:56:11 -04:00
phy-c45.c
net: phy: Fix "link partner" information disappear issue
2019-10-16 13:17:01 -07:00
phy-core.c
net: phy: add helpers phy_(un)lock_mdio_bus
2019-11-25 10:47:00 -08:00
phy.c
net: phy: remove phy_ethtool_sset()
2019-11-23 10:46:26 -08:00
phylink.c
net: phylink: fix failure to register on x86 systems
2020-01-03 12:37:55 -08:00
qsemi.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
realtek.c
net: phy: realtek: fix using paged operations with RTL8105e / RTL8208
2019-12-01 13:14:21 -08:00
rockchip.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
sfp-bus.c
net: sfp: add some quirks for GPON modules
2019-11-20 22:28:52 -08:00
sfp.c
net: sfp: fix hwmon
2019-12-04 16:57:52 -08:00
sfp.h
net: sfp: do not probe SFP module before we're attached
2019-02-08 15:11:25 -08:00
smsc.c
net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag
2019-10-23 21:44:44 -07:00
spi_ks8995.c
spi: Micrel eth switch: declare missing of table
2019-04-23 10:44:44 -07:00
ste10Xp.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
swphy.c
net: phy: swphy: emulate register MII_ESTATUS
2019-08-15 11:43:48 -07:00
swphy.h
…
teranetics.c
net: phy: remove gen10g_no_soft_reset
2019-03-03 21:47:57 -08:00
uPD60620.c
net: phy: switch drivers to use dynamic feature detection
2019-04-15 17:19:54 -07:00
vitesse.c
net: phy: remove calls to genphy_config_init
2019-08-17 12:34:50 -07:00
xilinx_gmii2rgmii.c
net: phy: gmii2rgmii: Dont use priv field in phy device
2019-09-05 12:32:06 +02:00