iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Sergio Aguirre fcbcea93ab omap3: zoom 2/3: Change debugboard serial port id 
This is now changed to PLAT8250_DEV_PLATFORM (= 0), because
it's the only port that's going to be initialized in
Zoom 2/3 boards.

So, it doesn't make sense to keep the hardcoded 3 value anymore.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:20 -05:00
..
include/mach
AM35xx: Introduce am35xx.h file
2010-02-15 10:03:35 -08:00
board-2430sdp.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-3430sdp.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-3630sdp.c
omap3: 3630sdp: Explicitly enable all UARTs
2010-03-15 16:34:19 -05:00
board-4430sdp.c
omap4: Fix build break by moving omap_smc1 into a separate .S
2010-03-11 09:38:53 -08:00
board-am3517evm.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-apollon.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-cm-t35.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-devkit8000.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-generic.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-h4.c
omap: convert boards to use physmap-flash
2010-02-15 10:03:32 -08:00
board-igep0020.c
omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board
2010-03-11 14:50:00 -08:00
board-ldp.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-n8x0.c
omap2: add USB initialization for tusb6010
2010-03-11 10:22:39 -08:00
board-omap3beagle.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-omap3evm.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-omap3pandora.c
omap3: pandora: add missing i2c3 board_info
2010-03-11 15:55:43 -08:00
board-omap3touchbook.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-overo.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-rx51-peripherals.c
omap: RX51: Remux to pull eMMC lines down when powering off
2010-02-15 10:03:34 -08:00
board-rx51-sdram.c
omap3: rx51: Add SDRAM init
2009-11-22 10:24:33 -08:00
board-rx51.c
Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-02-23 19:22:48 -08:00
board-sdp-flash.c
omap3: SDP: Introducing 'board-sdp-flash.c' for flash init
2010-02-15 10:03:33 -08:00
board-zoom2.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-zoom3.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
board-zoom-debugboard.c
omap3: zoom 2/3: Change debugboard serial port id
2010-03-15 16:34:20 -05:00
board-zoom-peripherals.c
omap3: zoom2/3 / 3630sdp: Don't init always all uarts
2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clkt2xxx_dpllcore.c
OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c
2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c
OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c
2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c
OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c
2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c
2010-01-26 20:13:06 -07:00
clkt34xx_dpll3m2.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clkt_clksel.c
OMAP clock: drop RATE_FIXED clock flag
2010-02-24 12:29:43 -07:00
clkt_dpll.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3xxx_data.c
OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
2010-02-24 12:29:43 -07:00
clock3xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP4: clock: Add dummy clock nodes for interface clocks
2010-02-24 17:45:17 -07:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
omap2: add USB initialization for tusb6010
2010-03-11 10:22:39 -08:00
clock2430_data.c
OMAP clock: drop RATE_FIXED clock flag
2010-02-24 12:29:43 -07:00
clock2430.c
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3517.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP3 clock: convert clock34xx.h to clock34xx_data.c
2009-12-11 16:12:15 -07:00
clock.c
OMAP2+ clock: revise omap2_clk_{disable,enable}()
2010-02-24 17:45:16 -07:00
clock.h
OMAP4: clock: Add dummy clock nodes for interface clocks
2010-02-24 17:45:17 -07:00
clockdomain.c
OMAP2+ clock: revise omap2_clk_{disable,enable}()
2010-02-24 17:45:16 -07:00
clockdomains44xx.h
ARM: OMAP4 clock domains : Add the missing Clock Domain Structure
2010-01-26 20:12:58 -07:00
clockdomains.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
cm4xxx.c
omap: Fix 44xx compile
2009-09-24 16:23:07 -07:00
cm44xx.h
ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4
2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h
[ARM] OMAP2 PRCM: clean up CM_IDLEST bits
2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h
OMAP3 clock: add support for 192Mhz DPLL4M2 output
2010-02-24 12:15:03 -07:00
cm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
cm.c
OMAP clock/hwmod: fix off-by-one errors
2009-12-11 17:00:43 -07:00
cm.h
OMAP2/3 clock: Extend find_idlest() to pass back idle state value
2010-02-24 12:05:54 -07:00
control.c
omap2/3/4: ioremap omap_globals module
2010-02-23 10:57:40 -08:00
cpuidle34xx.c
OMAP3: cpuidle: Add valid field into C-state parameter passing
2010-02-23 11:05:02 -08:00
devices.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
dpll3xxx.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpmc-nand.c
omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init
2010-02-15 10:03:33 -08:00
gpmc-onenand.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
gpmc-smc91x.c
omap: use smc91x_platdata to setup smc91x
2009-12-11 16:16:33 -08:00
gpmc.c
omap2/3/4: gpmc: kill compile warning
2010-02-15 10:03:33 -08:00
hsmmc.c
omap_hsmmc: Allow for a shared VccQ
2010-02-15 10:03:34 -08:00
hsmmc.h
omap_hsmmc: Allow for a shared VccQ
2010-02-15 10:03:34 -08:00
i2c.c
omap: i2c: Fix muxing for command line enabled bus
2010-02-25 14:45:08 -08:00
id.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
io.c
OMAP4: fix temporary hacks that break multi-omap PM
2010-03-11 15:55:43 -08:00
iommu2.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
irq.c
OMAP2/3: IRQ: ensure valid base address
2010-02-03 08:48:06 -08:00
Kconfig
Add minimal support for DevKit8000
2010-02-19 15:22:17 -08:00
mailbox.c
omap2/3/4: mailbox: remove compiler warning
2010-03-11 14:50:00 -08:00
Makefile
omap4: Fix build break by moving omap_smc1 into a separate .S
2010-03-11 09:38:53 -08:00
Makefile.boot
[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx
2005-11-10 14:26:51 +00:00
mcbsp.c
McBSP: OMAP3: Add sidetone feature
2010-02-23 10:57:39 -08:00
mux34xx.c
omap: Fix 3630 mux errors
2010-02-03 08:48:06 -08:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux.c
Merge branch 'omap-fixes-for-linus' into omap-for-linus
2010-02-17 14:08:58 -08:00
mux.h
omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3
2010-02-15 09:27:02 -08:00
omap3-iommu.c
omap: iommu: reorganize
2009-11-22 10:24:32 -08:00
omap44xx-smc.S
omap4: Fix build break by moving omap_smc1 into a separate .S
2010-03-11 09:38:53 -08:00
omap_hwmod_3xxx_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_2420_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_2430_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap-headsmp.S
OMAP4: AuxCoreBoot registers only accessible in secure mode
2009-12-11 16:16:35 -08:00
omap-smp.c
OMAP4: Remove the secondary wait loop
2009-12-11 16:16:35 -08:00
opp2xxx.h
omap2/3: Multiboot compile fixes to compile in omap2 and omap3
2010-02-15 09:26:55 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
pm24xx.c
OMAP clockdomains: add usecounting for wakeup and sleep dependencies
2010-01-26 20:13:01 -07:00
pm34xx.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
pm-debug.c
OMAP3 PM: Adding counters for power domain logic off and mem off during retention.
2010-02-24 12:05:50 -07:00
pm.h
OMAP3: cpuidle: Add valid field into C-state parameter passing
2010-02-23 11:05:02 -08:00
powerdomain.c
OMAP3 PM: Adding counters for power domain logic off and mem off during retention.
2010-02-24 12:05:50 -07:00
powerdomains24xx.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
powerdomains34xx.h
OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure
2010-02-24 12:05:50 -07:00
powerdomains44xx.h
ARM: OMAP4: PM: Add the Autogenerated OMAP4 specific power domain framework.
2010-01-26 20:12:52 -07:00
powerdomains.h
OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs
2010-01-29 10:14:23 -07:00
prcm-common.h
ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.
2010-01-26 20:12:51 -07:00
prcm.c
omap: pass the reboot command to the boot loader
2010-03-11 14:50:00 -08:00
prm44xx.h
OMAP4: PRCM: Fix the base address for CHIRONSS reg defines
2010-01-20 13:35:27 -07:00
prm-regbits-24xx.h
ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains
2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h
OMAP3: PM: Enable IO-CHAIN wakeup
2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
prm.h
ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.
2010-01-26 20:12:51 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc.c
omap2/3/4: ioremap omap_globals module
2010-02-23 10:57:40 -08:00
sdrc.h
OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
2009-12-11 16:16:00 -07:00
serial.c
omap2/3/4: serial: Remove condition for getting uart4_phys
2010-03-15 16:34:16 -05:00
sleep24xx.S
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sleep34xx.S
OMAP3: PM: Added support for L2 aux ctrl register save and restore
2010-02-23 11:05:07 -08:00
sram34xx.S
OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
2009-12-11 17:00:42 -07:00
sram242x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
sram243x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
timer-gp.c
OMAP4: clock: Remove clock hacks from timer-gp.c
2010-02-24 17:45:17 -07:00
timer-mpu.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-ehci.c
omap2/3/4: ehci: avoid compiler error with touchbook
2010-03-11 09:32:03 -08:00
usb-musb.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-tusb6010.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00