Anurag Kumar Vulisha fe8365bbf8 ata: ceva: Move sata port phy oob settings to device-tree ...

In SATA Speed negotiation happens with  OOB(Out of Band) signals. These OOB
signal timing values are configured through vendor specific registers in the
SATA controller. These OOB timings depends on the generator and detector clock
frequency, which varies from board to board (ex: ep108 and zc1751 has different
clock frequencies).
To avoid maintaing these OOB settings in the driver, it is better to move these
settings to the device-tree node and read from the device-tree.

This patch does the same.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

2017-10-23 07:09:26 -07:00

..

acard-ahci.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

ahci_brcm.c

ata: ahci_brcm: Avoid writing to read-only registers

2017-06-22 16:13:00 -04:00

ahci_ceva.c

ata: ceva: Move sata port phy oob settings to device-tree

2017-10-23 07:09:26 -07:00

ahci_da850.c

sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'

2017-08-16 07:38:27 -07:00

ahci_dm816.c

ata: ahci: add support for DaVinci DM816 SATA controller

2017-03-24 11:40:03 -04:00

ahci_imx.c

ahci: imx: fix building without hwmon or thermal

2017-01-15 18:51:12 -05:00

ahci_mtk.c

ata: mediatek: add support for MediaTek SATA controller

2017-08-28 10:54:42 -07:00

ahci_mvebu.c

ata: ahci_mvebu: add support for Armada 3700 variant

2016-02-18 12:41:17 -05:00

ahci_octeon.c

Delete redundant return value check of platform_get_resource()

2017-03-06 15:40:59 -05:00

ahci_platform.c

ata: ahci_platform: Add shutdown handler

2017-08-04 13:34:14 -07:00

ahci_qoriq.c

ahci: qoriq: add ls1088a platforms support

2017-06-02 09:49:33 -04:00

ahci_seattle.c

ata: fix return value check in ahci_seattle_get_port_info()

2016-06-15 14:26:41 -04:00

ahci_st.c

ahci: st: Add ports-implemented property in support

2016-08-10 12:16:49 -04:00

ahci_sunxi.c

ata: ahci_platform: fix owner module reference mismatch for scsi host

2015-01-28 18:45:23 -05:00

ahci_tegra.c

ata: ahci_platform: fix owner module reference mismatch for scsi host

2015-01-28 18:45:23 -05:00

ahci_xgene.c

ata: ahci_xgene: free structure returned by acpi_get_object_info()

2017-01-06 11:39:14 -05:00

ahci.c

ahci: Add support for Cavium's fifth generation SATA controller

2017-10-11 07:08:13 -07:00

ahci.h

libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag

2017-06-22 16:12:59 -04:00

ata_generic.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

ata_piix.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

Kconfig

Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-09-06 22:41:21 -07:00

libahci_platform.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

libahci.c

libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag

2017-06-22 16:12:59 -04:00

libata-acpi.c

ACPI and power management updates for 3.15-rc1

2014-04-01 12:48:54 -07:00

libata-core.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

libata-eh.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

libata-pmp.c

ata: pmp: add quirk for Marvell 4140 SATA PMP

2015-07-14 17:46:38 -04:00

libata-scsi.c

libata: make static arrays const, reduces object code size

2017-09-19 11:53:11 -07:00

libata-sff.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

libata-trace.c

libata: NCQ encapsulation for ZAC MANAGEMENT OUT

2016-05-09 12:36:46 -04:00

libata-transport.c

libata: transport: Remove circular dependency at free time

2017-03-06 15:24:48 -05:00

libata-transport.h

…

libata-zpodd.c

libata: zpodd: make arrays cdb static, reduces object code size

2017-09-06 07:40:28 -07:00

libata.h

libata: make ata_port_type const

2017-10-02 09:57:55 -07:00

Makefile

ata: mediatek: add support for MediaTek SATA controller

2017-08-28 10:54:42 -07:00

pata_acpi.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ali.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_amd.c

cs5536: add support for IDE controller variant

2017-08-11 10:35:07 -07:00

pata_arasan_cf.c

drivers: ata: pata_arasan_cf: use the same name for the same lock

2016-06-28 12:49:40 -04:00

pata_artop.c

ata: pata_artop: remove redundant initialization of pio

2017-09-18 20:24:21 -07:00

pata_at32.c

ata: drop owner assignment from platform_drivers

2014-10-20 16:20:17 +02:00

pata_atiixp.c

Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"

2017-03-27 13:52:00 -04:00

pata_atp867x.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

pata_bf54x.c

ata: bf54x: cut drvdata assignment

2017-05-30 11:54:36 -04:00

pata_bk3710.c

pata_bk3710: clear status bits of BMISP on chipset initialization

2017-03-30 16:13:04 +05:30

pata_cmd64x.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_cmd640.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_cs5520.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_cs5530.c

ata: Delete unnecessary checks before the function call "pci_dev_put"

2015-02-03 07:04:44 -05:00

pata_cs5535.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_cs5536.c

cs5536: add support for IDE controller variant

2017-08-11 10:35:07 -07:00

pata_cypress.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_efar.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ep93xx.c

ata: ep93xx: cut drvdata assignment

2017-05-30 11:54:36 -04:00

pata_falcon.c

Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-02-21 17:21:32 -08:00

pata_ftide010.c

ata: ftide010: fix resource printing

2017-06-21 18:06:18 -04:00

pata_hpt3x2n.c

ata: delete non-required instances of include <linux/init.h>

2014-02-13 16:40:56 -05:00

pata_hpt3x3.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_hpt37x.c

ata: delete non-required instances of include <linux/init.h>

2014-02-13 16:40:56 -05:00

pata_hpt366.c

ata: hpt366: fix incorrect mask when checking at cmd_high_time

2016-07-12 11:02:05 -04:00

pata_icside.c

scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS

2016-04-15 16:53:14 -04:00

pata_imx.c

pata: imx: support controller modes up to PIO4

2016-11-09 11:48:58 -05:00

pata_isapnp.c

PNP: ata/pata_isapnp: Use module_pnp_driver to register driver

2015-03-18 22:39:17 +01:00

pata_it821x.c

pata_it821x: use "const char *" for string literals

2015-10-15 10:58:53 -04:00

pata_it8213.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ixp4xx_cf.c

ata: pass queued command to ->sff_data_xfer method

2017-01-10 11:11:17 -05:00

pata_jmicron.c

PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

2015-08-24 15:27:11 -05:00

pata_legacy.c

ata: pass queued command to ->sff_data_xfer method

2017-01-10 11:11:17 -05:00

pata_macio.c

ata: constify of_device_id structures

2017-03-06 15:18:01 -05:00

pata_marvell.c

ata: Use IS_ENABLED() instead of checking for built-in or module

2016-05-27 11:27:23 -04:00

pata_mpc52xx.c

ata: constify of_device_id structures

2017-03-06 15:18:01 -05:00

pata_mpiix.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_netcell.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ninja32.c

pata_ninja32: Avoid corrupting status flags

2016-08-30 11:59:47 -04:00

pata_ns87410.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_ns87415.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_octeon_cf.c

pata_octeon_cf: use of_property_read_{bool|u32}()

2017-08-28 10:44:24 -07:00

pata_of_platform.c

ata: constify of_device_id structures

2017-03-06 15:18:01 -05:00

pata_oldpiix.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_opti.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_optidma.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_palmld.c

ata: drop owner assignment from platform_drivers

2014-10-20 16:20:17 +02:00

pata_pcmcia.c

ata: pass queued command to ->sff_data_xfer method

2017-01-10 11:11:17 -05:00

pata_pdc202xx_old.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_pdc2027x.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

pata_piccolo.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_platform.c

ata: pata_platform: fix owner module reference mismatch for scsi host

2015-01-28 18:45:23 -05:00

pata_pxa.c

ata: pata_pxa: dmaengine conversion

2015-09-10 17:02:04 -04:00

pata_radisys.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_rb532_cf.c

ata: rb532_cf: cut drvdata assignment

2017-05-30 11:54:37 -04:00

pata_rdc.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

pata_rz1000.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_samsung_cf.c

ata: samsung_cf: cut drvdata assignment

2017-05-30 11:54:37 -04:00

pata_sc1200.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_sch.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

pata_serverworks.c

pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller

2014-10-07 17:10:14 -04:00

pata_sil680.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

pata_sis.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_sl82c105.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_triflex.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pata_via.c

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-09 22:37:49 -04:00

pdc_adma.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_dwc_460ex.c

ata: dwc_460ex: cut drvdata assignment

2017-05-30 11:54:37 -04:00

sata_fsl.c

ata: sata_fsl: cut drvdata assignment

2017-05-30 11:54:37 -04:00

sata_gemini.c

ata: sata_gemini: Introduce explicit IDE pin control

2017-08-11 10:32:09 -07:00

sata_gemini.h

ata: Add driver for Faraday Technology FTIDE010

2017-06-12 12:02:51 -04:00

sata_highbank.c

remove lots of IS_ERR_VALUE abuses

2016-05-27 15:26:11 -07:00

sata_inic162x.c

ata: declare ata_port_info structures as const

2017-06-12 14:06:34 -04:00

sata_mv.c

ata: mark expected switch fall-throughs

2017-10-23 07:06:09 -07:00

sata_nv.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_promise.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_promise.h

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_qstor.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_rcar.c

ata: sata_rcar: Use of_device_get_match_data() helper

2017-10-04 07:18:29 -07:00

sata_sil24.c

ata: remove deprecated use of pci api

2015-04-08 10:55:05 -04:00

sata_sil.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_sis.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_svw.c

ata: Convert to using %pOF instead of full_name

2017-07-18 18:02:36 -04:00

sata_sx4.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_uli.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sata_via.c

sata_via: Enable optional hotplug on VT6420

2017-06-26 16:54:53 -04:00

sata_vsc.c

ata: update references for libata documentation

2017-05-16 11:25:59 -04:00

sis.h

…