8714c0cecf
Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.
Also, add helper functions to convert from display timings to a generic videomode
structure.
The struct display_timing specifies all needed parameters to describe the signal
properties of a display in one mode. This includes
- ranges for signals that may have min-, max- and typical values
- single integers for signals that can be on, off or are ignored
- booleans for signals that are either on or off
As a display may support multiple modes like this, a struct display_timings is
added, that holds all given struct display_timing pointers and declares the
native mode of the display.
Although a display may state that a signal can be in a range, it is driven with
fixed values that indicate a videomode. Therefore graphic drivers don't need all
the information of struct display_timing, but would generate a videomode from
the given set of supported signal timings and work with that.
The video subsystems all define their own structs that describe a mode and work
with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those
various structures and allow code reuse across those subsystems, add struct
videomode as a generic description.
This patch only includes the most basic fields in struct videomode. All missing
fields that are needed to have a really generic video mode description can be
added at a later stage.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
125 lines
3.5 KiB
C
125 lines
3.5 KiB
C
/*
|
|
* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
|
|
*
|
|
* description of display timings
|
|
*
|
|
* This file is released under the GPLv2
|
|
*/
|
|
|
|
#ifndef __LINUX_DISPLAY_TIMING_H
|
|
#define __LINUX_DISPLAY_TIMING_H
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/types.h>
|
|
|
|
/* VESA display monitor timing parameters */
|
|
#define VESA_DMT_HSYNC_LOW BIT(0)
|
|
#define VESA_DMT_HSYNC_HIGH BIT(1)
|
|
#define VESA_DMT_VSYNC_LOW BIT(2)
|
|
#define VESA_DMT_VSYNC_HIGH BIT(3)
|
|
|
|
/* display specific flags */
|
|
#define DISPLAY_FLAGS_DE_LOW BIT(0) /* data enable flag */
|
|
#define DISPLAY_FLAGS_DE_HIGH BIT(1)
|
|
#define DISPLAY_FLAGS_PIXDATA_POSEDGE BIT(2) /* drive data on pos. edge */
|
|
#define DISPLAY_FLAGS_PIXDATA_NEGEDGE BIT(3) /* drive data on neg. edge */
|
|
#define DISPLAY_FLAGS_INTERLACED BIT(4)
|
|
#define DISPLAY_FLAGS_DOUBLESCAN BIT(5)
|
|
|
|
/*
|
|
* A single signal can be specified via a range of minimal and maximal values
|
|
* with a typical value, that lies somewhere inbetween.
|
|
*/
|
|
struct timing_entry {
|
|
u32 min;
|
|
u32 typ;
|
|
u32 max;
|
|
};
|
|
|
|
enum timing_entry_index {
|
|
TE_MIN = 0,
|
|
TE_TYP = 1,
|
|
TE_MAX = 2,
|
|
};
|
|
|
|
/*
|
|
* Single "mode" entry. This describes one set of signal timings a display can
|
|
* have in one setting. This struct can later be converted to struct videomode
|
|
* (see include/video/videomode.h). As each timing_entry can be defined as a
|
|
* range, one struct display_timing may become multiple struct videomodes.
|
|
*
|
|
* Example: hsync active high, vsync active low
|
|
*
|
|
* Active Video
|
|
* Video ______________________XXXXXXXXXXXXXXXXXXXXXX_____________________
|
|
* |<- sync ->|<- back ->|<----- active ----->|<- front ->|<- sync..
|
|
* | | porch | | porch |
|
|
*
|
|
* HSync _|¯¯¯¯¯¯¯¯¯¯|___________________________________________|¯¯¯¯¯¯¯¯¯
|
|
*
|
|
* VSync ¯|__________|¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯|_________
|
|
*/
|
|
struct display_timing {
|
|
struct timing_entry pixelclock;
|
|
|
|
struct timing_entry hactive; /* hor. active video */
|
|
struct timing_entry hfront_porch; /* hor. front porch */
|
|
struct timing_entry hback_porch; /* hor. back porch */
|
|
struct timing_entry hsync_len; /* hor. sync len */
|
|
|
|
struct timing_entry vactive; /* ver. active video */
|
|
struct timing_entry vfront_porch; /* ver. front porch */
|
|
struct timing_entry vback_porch; /* ver. back porch */
|
|
struct timing_entry vsync_len; /* ver. sync len */
|
|
|
|
unsigned int dmt_flags; /* VESA DMT flags */
|
|
unsigned int data_flags; /* video data flags */
|
|
};
|
|
|
|
/*
|
|
* This describes all timing settings a display provides.
|
|
* The native_mode is the default setting for this display.
|
|
* Drivers that can handle multiple videomodes should work with this struct and
|
|
* convert each entry to the desired end result.
|
|
*/
|
|
struct display_timings {
|
|
unsigned int num_timings;
|
|
unsigned int native_mode;
|
|
|
|
struct display_timing **timings;
|
|
};
|
|
|
|
/* get value specified by index from struct timing_entry */
|
|
static inline u32 display_timing_get_value(const struct timing_entry *te,
|
|
enum timing_entry_index index)
|
|
{
|
|
switch (index) {
|
|
case TE_MIN:
|
|
return te->min;
|
|
break;
|
|
case TE_TYP:
|
|
return te->typ;
|
|
break;
|
|
case TE_MAX:
|
|
return te->max;
|
|
break;
|
|
default:
|
|
return te->typ;
|
|
}
|
|
}
|
|
|
|
/* get one entry from struct display_timings */
|
|
static inline struct display_timing *display_timings_get(const struct
|
|
display_timings *disp,
|
|
unsigned int index)
|
|
{
|
|
if (disp->num_timings > index)
|
|
return disp->timings[index];
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
void display_timings_release(struct display_timings *disp);
|
|
|
|
#endif
|