Joakim Zhang 66ce8bfad6 can: flexcan: flexcan_remove(): disable wakeup completely ...

[ Upstream commit ab07ff1c92fa60f29438e655a1b4abab860ed0b6 ]

With below sequence, we can see wakeup default is enabled after re-load module,
if it was enabled before, so we need disable wakeup in flexcan_remove().

| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| disabled
| # echo enabled > /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled
| # rmmod flexcan
| # modprobe flexcan
| # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup
| enabled

Fixes: de3578c198c6 ("can: flexcan: add self wakeup support")
Fixes: 915f9666421c ("can: flexcan: add support for DT property 'wakeup-source'")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com
[mkl: streamlined commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

2020-11-18 19:20:20 +01:00

..

c_can

can: c_can: C_CAN: add bus recovery events

2019-11-04 21:47:21 +01:00

cc770

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495

2019-06-19 17:09:52 +02:00

ifi_canfd

…

m_can

can: m_can_platform: don't call m_can_class_suspend in runtime suspend

2020-10-29 09:57:24 +01:00

mscan

can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode

2020-01-14 20:08:27 +01:00

peak_canfd

can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on

2020-11-18 19:20:20 +01:00

rcar

can: rcar_can: Remove unused platform data support

2019-08-20 13:41:25 +02:00

sja1000

can: peak_pci: Make structure peak_pciec_i2c_bit_ops constant

2019-08-20 13:41:25 +02:00

softing

net/can: using dev_get_drvdata directly

2019-07-05 15:24:41 -07:00

spi

can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race condition

2019-11-05 12:44:22 +01:00

usb

can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping

2020-11-18 19:20:20 +01:00

at91_can.c

can: mark expected switch fall-throughs

2019-07-25 20:09:42 -05:00

dev.c

can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames

2020-11-18 19:20:19 +01:00

flexcan.c

can: flexcan: flexcan_remove(): disable wakeup completely

2020-11-18 19:20:20 +01:00

grcan.c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30 11:26:32 -07:00

janz-ican3.c

net: Remove dev_err() usage after platform_get_irq()

2019-07-30 14:37:35 -07:00

Kconfig

can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices

2019-07-24 10:31:53 +02:00

kvaser_pciefd.c

can: kvaser_pciefd: the PWM generator is running at the bus frequency of the system.

2019-09-03 10:23:57 +02:00

led.c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19 17:09:55 +02:00

Makefile

can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices

2019-07-24 10:31:53 +02:00

pch_can.c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 340

2019-06-05 17:37:07 +02:00

rx-offload.c

can: rx-offload: don't call kfree_skb() from IRQ context

2020-11-18 19:20:18 +01:00

slcan.c

slcan: Don't transmit uninitialized stack data in padding

2020-04-13 10:48:05 +02:00

sun4i_can.c

net: Remove dev_err() usage after platform_get_irq()

2019-07-30 14:37:35 -07:00

ti_hecc.c

can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path

2020-11-18 19:20:19 +01:00

vcan.c

can: make use of preallocated can_ml_priv for per device struct can_dev_rcv_lists

2019-09-04 13:29:15 +02:00

vxcan.c

can: make use of preallocated can_ml_priv for per device struct can_dev_rcv_lists

2019-09-04 13:29:15 +02:00

xilinx_can.c

can: xilinx_can: handle failure cases of pm_runtime_get_sync

2020-11-18 19:20:19 +01:00