iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/usb/serial
History
Lech Perczak 306f780bf6 USB: serial: option: don't claim interface 4 for ZTE MF290 
commit 8771127e25d6c20d458ad27cf32f7fcfc1755e05 upstream.

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Free the interface up, to rebind it to
qmi_wwan driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-03 07:33:10 +01:00
..
aircable.c
…
ark3116.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
belkin_sa.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
belkin_sa.h
…
bus.c
USB: mark all struct bus_type as const
2023-03-23 13:22:00 +01:00
ch341.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
console.c
tty: Cleanup tty_port_set_initialized() bool parameter
2023-01-19 16:04:34 +01:00
cp210x.c
USB: serial: cp210x: disable break signalling on CP2105 SCI
2023-06-07 17:00:23 +02:00
cyberjack.c
USB: serial: make usb_serial_driver::write_room return uint
2021-05-19 10:56:40 +02:00
cypress_m8.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
cypress_m8.h
…
digi_acceleport.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
empeg.c
…
ezusb_convert.pl
…
f81232.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
f81534.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
ftdi_sio_ids.h
USB: serial: ftdi_sio: add support for HP and HA devices
2022-09-15 08:06:06 +02:00
ftdi_sio.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
ftdi_sio.h
USB: serial: ftdi_sio: rename channel index
2022-09-15 08:05:53 +02:00
garmin_gps.c
treewide: Convert del_timer*() to timer_shutdown*()
2022-12-25 13:38:09 -08:00
generic.c
USB: serial: make usb_serial_driver::chars_in_buffer return uint
2021-05-19 10:56:41 +02:00
io_16654.h
…
io_edgeport.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
io_edgeport.h
…
io_ionsp.h
…
io_ti.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
io_ti.h
…
io_usbvend.h
USB: serial: io_ti: add Agilent E5805A support
2022-06-09 14:13:28 +02:00
ipaq.c
USB: serial: replace symbolic permissions by octal permissions
2021-08-26 09:38:27 +02:00
ipw.c
…
ir-usb.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
iuu_phoenix.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
iuu_phoenix.h
…
Kconfig
USB: serial: simple: add Nokia phone driver
2022-03-03 09:27:36 +01:00
keyspan_pda.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
keyspan_usa26msg.h
…
keyspan_usa28msg.h
…
keyspan_usa49msg.h
…
keyspan_usa67msg.h
…
keyspan_usa90msg.h
…
keyspan.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
kl5kusb105.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
kl5kusb105.h
…
kobil_sct.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
kobil_sct.h
…
Makefile
…
Makefile-keyspan_pda_fw
…
mct_u232.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
mct_u232.h
…
metro-usb.c
USB: serial: drop irq-flags initialisations
2021-05-21 15:46:25 +02:00
mos7720.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
mos7840.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
mxuport.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
navman.c
…
omninet.c
USB: serial: omninet: update driver description
2021-05-25 08:59:17 +02:00
opticon.c
USB: serial: use kmemdup instead of kmalloc + memcpy
2022-06-22 08:56:52 +02:00
option.c
USB: serial: option: don't claim interface 4 for ZTE MF290
2023-12-03 07:33:10 +01:00
oti6858.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
oti6858.h
…
pl2303.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
pl2303.h
USB: serial: pl2303: add device id for HP LM930 Display
2022-05-05 13:31:03 +02:00
qcaux.c
…
qcserial.c
USB: serial: qcserial: add new usb-id for Dell branded EM7455
2022-09-27 09:04:28 +02:00
quatech2.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
safe_serial.c
…
sierra.c
USB: serial: fix tty-port initialized comments
2022-07-25 11:01:40 +02:00
spcp8x5.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
ssu100.c
usb: serial: Make ->set_termios() old ktermios const
2022-08-30 14:22:35 +02:00
symbolserial.c
…
ti_usb_3410_5052.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
upd78f0730.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
usb_debug.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
usb_wwan.c
USB-serial updates for 5.20-rc1
2022-07-25 11:28:52 +02:00
usb-serial-simple.c
USB: serial: simple: sort driver entries
2023-07-20 15:59:25 +02:00
usb-serial.c
tty: make tty_operations::write()'s count size_t
2023-08-11 21:12:46 +02:00
usb-wwan.h
USB: serial: make usb_serial_driver::chars_in_buffer return uint
2021-05-19 10:56:41 +02:00
visor.c
…
visor.h
…
whiteheat.c
USB: serial: return errors from break handling
2023-06-07 17:00:23 +02:00
whiteheat.h
…
wishbone-serial.c
…
xr_serial.c
USB: serial: xr: add TIOCGRS485 and TIOCSRS485 ioctls
2023-07-20 15:37:03 +02:00
xsens_mt.c
…