keremet/mkimage-profiles
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3bf51ea7e6
mkimage-profiles/image.in/Makefile

121 lines
3.9 KiB
Makefile
Raw Normal View History

image.in: cosmetic fix Bring the stage/step prefix into line for those greppin' through.
2016-02-08 20:10:14 +03:00
# step 4: dive into mkimage
assorted fixups - more thorough build stages inline doc - quieter BUILDDIR instantiation - branding-altlinux-sisyphus by default - prettify installer selection somewhat - mkimage #24669 fixed upstream - sub.in/stage1/modules: +drm (as in m-p-d, for KMS) - tags2lists: generalize a bit
2010-12-03 17:53:02 +03:00
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
GLOBAL_BUILDDIR ?= $(shell pwd)
downstream postprocessing symlinks tweaked The bigger goal was being able to set up build in a way that would allow for images (with configs and logs) be deposited in per-IMAGE_NAME subdirectories of IMAGEDIR; that's not done yet but a part of it is ready. NB: in BUILDDIR, symlinking the just-built image is now replaced with symlinking the IMAGEDIR since its location is then predictable thus .gitignore-able for further work on a generated profile, and more documentable as well. It's not a hard change though, if you miss the image link just drop me a note (or a commit).
2011-11-05 13:03:48 +04:00
CURRENT_LINK := mkimage-profiles
OUT_LINK := out
kernel and BUILDDIR fixes - image.in/functions.mk: rework kpackage() + it takes two arguments explicitly now: this adds some noise for "generic" invocations but is rather less messy with recently introduced STAGE1_KFLAVOUR (which in its turn is rather cleaner than messing with KFLAVOURS, especially since soemthing changed in presumably apt and we can't rely on kernel packages being installed in the order formed). - BUILDDIR/DEBUG related fixes + Makefile: BUILDDIR initialization moved to distro.mk - build.log += git info
2011-06-12 19:06:36 +04:00
image.in/Makefile: mkimage version check There's a recommended version (0.2.0+ currently) and also the minimal version, 0.1.7, which received the important fixes. It was proposed by nice antique@ folks IIRC. Unfortunately the "suboptimal version" warning is pretty modest, and "minimal version" error will be apparent with DEBUG enabled; still the latter will terminate the downstream build and leave a clear message in build.log at any rate.
2011-11-08 02:07:38 +04:00
# there were mkimage fixes induced by mkimage-profile development
efi: employ mkimage The initial approach required some quite involved postprocessing as described in http://www.altlinux.org/UEFI#HOWTO; after having ironed out the kinks so that initial EFI support could be merged into mkimage proper we're better off just using it, eh?
2012-12-12 00:00:35 +04:00
# - minimal version is bumped for critical bugfixes/features
# - optimal one relates to the less universally relevant bits
image.in/Makefile: mkimage version check There's a recommended version (0.2.0+ currently) and also the minimal version, 0.1.7, which received the important fixes. It was proposed by nice antique@ folks IIRC. Unfortunately the "suboptimal version" warning is pretty modest, and "minimal version" error will be apparent with DEBUG enabled; still the latter will terminate the downstream build and leave a clear message in build.log at any rate.
2011-11-08 02:07:38 +04:00
MKI_VER_MINIMAL = 0.1.7
image.in: bump optimal mkimage version 0.2.6 has fixes for xorriso and support for refind.
2013-01-21 15:08:35 +04:00
MKI_VER_OPTIMAL = 0.2.6
image.in/Makefile: mkimage version check There's a recommended version (0.2.0+ currently) and also the minimal version, 0.1.7, which received the important fixes. It was proposed by nice antique@ folks IIRC. Unfortunately the "suboptimal version" warning is pretty modest, and "minimal version" error will be apparent with DEBUG enabled; still the latter will terminate the downstream build and leave a clear message in build.log at any rate.
2011-11-08 02:07:38 +04:00
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
include distcfg.mk
working installer iso image - s/stage2/install2/g - added pkg/lists - initial README (ru_RU.KOI8-R) - mkimage topdir is in image.in/, really (off-tree build) + initial bin/mktmpdir + BUILDDIR (works) - s/cd/iso/ - drop --with-distro (considered harmful)
2010-08-28 20:28:42 +04:00
include functions.mk
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
# check the build environment
check vigorously for installed mkimage It was briefly mentioned in QUICKSTART but somehow managed to evade the commandlines provided. And while at it, let's make errors like this more explicit to avoid extra lookups. Oh, and fix QUICKSTART so that readers miss the hassle. :) Thanks Vladimir Karpinsky for pointing this problem out.
2012-01-05 00:30:56 +04:00
ifeq (,$(realpath $(MKIMAGE_PREFIX)/config.mk))
$(error please apt-get install mkimage and have a look at QUICKSTART as well)
endif
image.in/Makefile: fixed thinko regression MKI_VERSION was tested against even before the config.mk that defines it got included. Ouch.
2012-01-21 23:39:28 +04:00
include $(MKIMAGE_PREFIX)/config.mk
image.in/Makefile: mkimage version check There's a recommended version (0.2.0+ currently) and also the minimal version, 0.1.7, which received the important fixes. It was proposed by nice antique@ folks IIRC. Unfortunately the "suboptimal version" warning is pretty modest, and "minimal version" error will be apparent with DEBUG enabled; still the latter will terminate the downstream build and leave a clear message in build.log at any rate.
2011-11-08 02:07:38 +04:00
ifeq (-,$(shell rpmvercmp $(MKI_VERSION) $(MKI_VER_MINIMAL) | tr -d [0-9]))
$(info error: mkimage-$(MKI_VERSION) is too old, please upgrade)
$(error mkimage is too old, $(MKI_VER_MINIMAL) is minimal supported version)
endif
ifeq (-,$(shell rpmvercmp $(MKI_VERSION) $(MKI_VER_OPTIMAL) | tr -d [0-9]))
$(info warning: mkimage-$(MKI_VERSION) is suboptimal, consider upgrading)
$(warning consider upgrading mkimage to $(MKI_VER_OPTIMAL) or better)
endif
ensure that IMAGEDIR exists (thus globbable) It appears that manually specified IMAGEDIR, e.g. by adding IMAGEDIR = ~/out/$(shell date +%Y%m%d) to ~/.mkimage/profiles.mk, might be problematic due to missing globbing. Let's make sure the paths are globbed and directories are created -- since make's wildcard() returns an empty string when there's nothing there [yet].
2013-02-04 19:18:06 +04:00
# glob it just in case
IMAGEDIR := $(wildcard $(IMAGEDIR))
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
# additional means to reduce havoc in IMAGEDIR
ensure that IMAGEDIR exists (thus globbable) It appears that manually specified IMAGEDIR, e.g. by adding IMAGEDIR = ~/out/$(shell date +%Y%m%d) to ~/.mkimage/profiles.mk, might be problematic due to missing globbing. Let's make sure the paths are globbed and directories are created -- since make's wildcard() returns an empty string when there's nothing there [yet].
2013-02-04 19:18:06 +04:00
IMAGE_SORTDIR := $(wildcard $(SORTDIR))
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
image: Add DISTRO_VERSION variable support Use it in the image filename, so we'll know what version of a distro it is.
2017-03-27 18:32:09 +03:00
# use distro version in image name if defined
ifdef DISTRO_VERSION
IMAGE_VERSION := -$(DISTRO_VERSION)
IMAGE_VER_LINK := $(IMAGE_NAME)$(IMAGE_VERSION)-latest-$(ARCH).$(IMAGE_TYPE)
endif
IMAGE_OUTFILE := \
$(IMAGE_NAME)$(IMAGE_VERSION)-$(STATUS)$(DATE)-$(ARCH).$(IMAGE_TYPE)
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
IMAGE_OUTDIR := $(IMAGEDIR)$(IMAGE_SORTDIR:%=/%)
IMAGE_OUTPATH := $(IMAGE_OUTDIR)/$(IMAGE_OUTFILE)
IMAGE_RELPATH := $(IMAGE_SORTDIR:%=%/)$(IMAGE_OUTFILE)
IMAGE_RELDIR := $(IMAGE_OUTDIR:$(GLOBAL_BUILDDIR)/%=%)
Change link to the image format. $(IMAGE_NAME).$(IMAGE_TYPE) -> $(IMAGE_NAME)-latest-$(ARCH).$(IMAGE_TYPE)
2012-06-18 17:16:52 +04:00
IMAGE_LINK := $(IMAGE_NAME)-latest-$(ARCH).$(IMAGE_TYPE)
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
IMAGE_LINKPATH := $(IMAGEDIR)/$(IMAGE_LINK)
### multi-pack can be useful (think netinst iso/tree)
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
MKI_PACK_RESULTS = $(IMAGE_PACKTYPE):$(IMAGE_OUTFILE)
working installer iso image - s/stage2/install2/g - added pkg/lists - initial README (ru_RU.KOI8-R) - mkimage topdir is in image.in/, really (off-tree build) + initial bin/mktmpdir + BUILDDIR (works) - s/cd/iso/ - drop --with-distro (considered harmful)
2010-08-28 20:28:42 +04:00
image.in, branding: comment fixups (rather cosmetic changes)
2015-08-07 12:50:49 +03:00
# these get copied over as is
syslinux and features - syslinux: menu.c32 works - features: initial draft + memtest - mv pkg/ pkg.in/ + server-base: include openssh-blacklist by default - mv isodata/ copy/ - README: changed to utf8, added an URL
2010-09-09 13:50:29 +04:00
COPY_TREE = ./files
working installer iso image - s/stage2/install2/g - added pkg/lists - initial README (ru_RU.KOI8-R) - mkimage topdir is in image.in/, really (off-tree build) + initial bin/mktmpdir + BUILDDIR (works) - s/cd/iso/ - drop --with-distro (considered harmful)
2010-08-28 20:28:42 +04:00
initial logging subsystem Now we don't dump all the gory details onto thee but rather log them handsomely and present only the most important details by default; use DEBUG=1 and/or BUILDLOG=/path/to/file to tweak. Also introduced IMAGEDIR and IMAGENAME. The rest: - ovz-smp is no more - base-l10n pkglist (suggested by Alexander Kuprin) - clean.mk: + fixed an oversight: the test result erroneously applied only to the first command of several ones that should be run iff build/ is a symlink + drop implicit rules (it's no C code) - Makefile: more reasonable iso names - image.in/Makefile: .disk/date too
2011-05-11 23:40:47 +04:00
# outdir shouldn't be wiped clean before use
pass squashfs options from stage1 test to install2 This looks a bit weird (two subprofiles become a bit more tightly coupled) but in fact install2 does depend on stage1, and if stage1 doesn't create squashcfg.mk then install2 is just fine with defaults (provided they fit the installer kernel used). A proper mkimage test infrastructure might be handy though. Also there: - 01-initfs: partial cleanup (bootsplash is obsolete anyways) - regarding 03-test-kernel's errorlevel test: if 0, 1 and 2 need to be distinguished, "!" MUST NOT be used as it negates so that 0 becomes 1 and the rest becomes 0
2011-06-14 18:25:55 +04:00
CLEANUP_OUTDIR ?=
initial logging subsystem Now we don't dump all the gory details onto thee but rather log them handsomely and present only the most important details by default; use DEBUG=1 and/or BUILDLOG=/path/to/file to tweak. Also introduced IMAGEDIR and IMAGENAME. The rest: - ovz-smp is no more - base-l10n pkglist (suggested by Alexander Kuprin) - clean.mk: + fixed an oversight: the test result erroneously applied only to the first command of several ones that should be run iff build/ is a symlink + drop implicit rules (it's no C code) - Makefile: more reasonable iso names - image.in/Makefile: .disk/date too
2011-05-11 23:40:47 +04:00
non-native ARM support via qemu mkimage and hasher can make use of qemu to run non-native binaries while working on the chroots; thanks kas@, manowar@ and sbolshakov@ for implementing this functionality as well as providing nice examples through mkimage-profiles-arm and mkimage-profile-armrootfs. This required the architecture check to be added since baking a tarball with "arm" as its specified arch and x86_64 inside isn't particularly good thing to let slip through; however the implementation is quite fragile, bugreports and patches are seriously welcome. NB: APTCONF evaluation order between lazy make and nimble shell turned out to be quite a delicate issue in this particular case.
2012-07-09 22:50:57 +04:00
GLOBAL_TARGET := $(ARCH)
image.in: add INSTALL_LANGS variable to setup rpm _install_langs This option allows to make smallest images even smaller by reducing amount of installed locales.
2016-07-07 19:35:33 +03:00
GLOBAL_HSH_LANGS := $(INSTALL_LANGS)
dump sources.list to build.log The seemingly obvious feature was proposed by torabora@. APTCONF complicates things a bit of course... (and was slightly kludgy btw; fixed)
2011-11-04 02:14:18 +04:00
GLOBAL_HSH_APT_CONFIG := $(wildcard $(APTCONF))
drop autoconf, a few vars in .mk suffice A major change in approach largely thanks to discussions with Alexey Cheusov but also well aligned with my own findings: autoconf doesn't let the variables to form an inheritance. And data flow described at http://www.altlinux.org/WhiteLabel (which in its turn was born thanks to Gavin Henrick of Diva Telecom and to Alexander Bokovoy of SaM-Solutions) is really dependent on the existence of such an inheritance. Also: - distro.mk += try() - "hide" special targets - fixed wrt distro/.{base,init,metaconf}, thx gns@ - README updates + added metaconf.mk + clarifications - updated pci.ids location for hdt
2010-09-27 23:02:57 +04:00
image.in, build-*: generalize SUBDIRS This is a fix to previous failures of ve/vm + use/repo/main build attempts (in fact, any non-distro/ targets). SUBDIRS were just optimized away...
2018-02-15 16:57:50 +03:00
# take the latter part for complex-specified subprofiles like stage2@live;
# care to exclude non-directories holding no makefiles like rootfs
image.in/Makefile: Disable sort subprofiles Sorting profiles was a mistake. stage1 must run ahead of the stage2 subprofiles, as this is the stage where the squash compression settings are configured. See-also: commit da65dc2fd9686b02d17241b26ebf7364d946bff8 https://lists.altlinux.org/pipermail/devel-distro/2021-March/002319.html
2021-03-19 22:04:28 +03:00
SUBDIRS = $(dir $(wildcard $(addsuffix /Makefile,$(SUBPROFILE_DIRS))))
image.in, build-*: generalize SUBDIRS This is a fix to previous failures of ve/vm + use/repo/main build attempts (in fact, any non-distro/ targets). SUBDIRS were just optimized away...
2018-02-15 16:57:50 +03:00
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
# the lib/build-*.mk comes from features.in/build-*/lib
make-3.82 adaptation The issue actually hit image.in/Makefile: "metadata" target in features.in/metadata/lib/50-metadata.mk wasn't reached even if features.in/build-distro/lib/90-build-distro.mk would ACK that the "whatever" actions included "metadata"; thus Metadata/pkg-groups.tar wasn't created and the installer silently failed to install the .base system. Let's armour the rest of the cases where the order of inclusion might be important as well.
2012-10-10 17:18:32 +04:00
include $(sort $(wildcard lib/*.mk))
--as-needed for pkg/lists As not every package list is useful for every distro, only the needed lists should be copied for a particular one.
2010-09-08 16:47:06 +04:00
include $(MKIMAGE_PREFIX)/targets.mk
working installer iso image - s/stage2/install2/g - added pkg/lists - initial README (ru_RU.KOI8-R) - mkimage topdir is in image.in/, really (off-tree build) + initial bin/mktmpdir + BUILDDIR (works) - s/cd/iso/ - drop --with-distro (considered harmful)
2010-08-28 20:28:42 +04:00
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
# specified only for the final image (target-specific)
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
pack-image: OUTDIR = $(IMAGE_OUTDIR)
image.in/Makefile: phonytize targets It is a current convention to prefer clearly phony targets (see the wiki page) so let's follow it here too.
2011-11-09 23:14:22 +04:00
pack-image: imagedir
.base rehashed, DISK_LISTS renamed, etc In particular: - .base is now generated from pieces (see image.in/Makefile) - s/DISTROS/IMAGES/g; s/CONFIGS/DISTROS/g (for clarity) - s/DISK_LISTS/MAIN_LISTS/g ("disk" was early m-p-d legacy) - introduced BASE_PACKAGES to complement BASE_LISTS - minor tweaks to Makefile (ARCH and DATE moved elsewhere) - libdistro.mk: dropped overlooked IMAGE_INIT_LIST copy - clean.mk: silly cleanup
2011-07-15 01:00:46 +04:00
image.in/Makefile: introduced save-profile From now on, non-empty SAVE_PROFILE variable will indicate the need to carry the particular generated profile inside the image built from it. Thanks gns@ for this feature in liveflash.eeepc.
2012-02-08 00:21:33 +04:00
copy-tree: $(SAVE_PROFILE:%=save-profile)
save-profile:
@mkdir -p files/.disk; \
git archive --prefix=mkimage-profile/ HEAD \
| gzip -9 > files/.disk/profile.tgz
image.in/Makefile: phonytize targets It is a current convention to prefer clearly phony targets (see the wiki page) so let's follow it here too.
2011-11-09 23:14:22 +04:00
.PHONY: imagedir postprocess debug
prep optimization There was some extra duplication, just clean it up.
2012-07-10 20:08:01 +04:00
prep: imagedir
image.in/Makefile: phonytize targets It is a current convention to prefer clearly phony targets (see the wiki page) so let's follow it here too.
2011-11-09 23:14:22 +04:00
imagedir:
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
@mkdir -p "$(IMAGE_OUTDIR)"
initial logging subsystem Now we don't dump all the gory details onto thee but rather log them handsomely and present only the most important details by default; use DEBUG=1 and/or BUILDLOG=/path/to/file to tweak. Also introduced IMAGEDIR and IMAGENAME. The rest: - ovz-smp is no more - base-l10n pkglist (suggested by Alexander Kuprin) - clean.mk: + fixed an oversight: the test result erroneously applied only to the first command of several ones that should be run iff build/ is a symlink + drop implicit rules (it's no C code) - Makefile: more reasonable iso names - image.in/Makefile: .disk/date too
2011-05-11 23:40:47 +04:00
initial isohybrid support Here we go with postprocessing priorities along the way as ISO hybridization has to occur before implanting final MD5 sum (which must happen earlier than e.g. some external MD5SUM file generation). Unfortunately proper dependencies aren't applicable here (though I'd like to be proved wrong on this one). Please note that this needs propagator > 20101130-alt9 for automatic mode to work (has also been worked around in gfxboot case with design-bootloader-source-6.0-alt1). Thanks rom_as@ for asking about the hybrid image status and helping out with testing.
2011-12-12 19:34:00 +04:00
postprocess: | $(addprefix postprocess-,$(sort $(POSTPROCESS_TARGETS)))
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
@OUTSIZE="`ls -lh "$(IMAGE_OUTPATH)" | cut -f5 -d' '`"; \
image.in, build-vm: handle qemu-img absence properly This isn't a warning cause, this is a error cause!
2017-12-04 19:41:17 +03:00
if [ ! -n "$$OUTSIZE" ]; then \
echo "** error: $(IMAGE_OUTPATH) missing" >&2; \
exit 1; \
fi; \
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
echo "** image: $(IMAGE_OUTPATH) [$$OUTSIZE]" >&2 && \
echo "IMAGE_OUTPATH = $(IMAGE_OUTPATH)" && \
Add LIBDIR variable. Allow to put the log files and reports in a custom directory instead of IMIGEDIR.
2012-06-15 20:33:04 +04:00
echo "IMAGE_OUTFILE = $(IMAGE_OUTFILE)" && \
better output directory and results structuring Following m-p-d, a more involved default output directory structure is feasible now: ~/out/name/date/name-date-arch.type instead of plain ~/out/name-date-arch.type This particular behaviour can be achieved by passing SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes. Reports are also saved in this resulting structure albeit the place is still highly debatable.
2012-04-23 22:56:35 +04:00
ln -sf "$(IMAGE_RELPATH)" "$(IMAGE_LINKPATH)" && \
ln -sf "$(IMAGE_RELDIR)" "$(OUT_LINK)" && \
ln -sf "$(IMAGE_LINK)" "$(IMAGEDIR)/$(CURRENT_LINK).$(IMAGE_TYPE)"; \
image: Add DISTRO_VERSION variable support Use it in the image filename, so we'll know what version of a distro it is.
2017-03-27 18:32:09 +03:00
if [ -n "$(IMAGE_VER_LINK)" ]; then \
ln -sf "$(IMAGE_RELPATH)" "$(IMAGEDIR)/$(IMAGE_VER_LINK)"; \
fi; \
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
if [ -n "$(GLOBAL_DEBUG)" ]; then \
Add LIBDIR variable. Allow to put the log files and reports in a custom directory instead of IMIGEDIR.
2012-06-15 20:33:04 +04:00
mkdir -p "$(LOGDIR)"; \
cp -a build.log "$(LOGDIR)/$(IMAGE_OUTFILE).log"; \
cp -a distcfg.mk "$(LOGDIR)/$(IMAGE_OUTFILE).cfg"; \
official {distro,ve}/* support This is quite a large-scale change since mkimage-profiles got used to baking distributions over the last year, and virtual environments are quite different, so e.g. image.in/Makefile had to be split in two with the main part of it moved into features.in/iso/lib/. Short overview: - features.in/Makefile: lib/ support (supporting VE images requires dynamic modifications to image.in/Makefile before starting the build; the most natural way to achieve that seems to use features mechanism along with makefile include dir) - packaging format related part moved into features.in/pack (should be better prepared for diversity either) - features.in/iso renamed to features.in/build-distro - features.in/ve renamed to features.in/build-ve + NB: these could not be merged as e.g. features.in/build due to completely different script hooks - lib/image.mk renamed to lib/build.mk - image, config, log postprocessing moved downstream - added a sort of a topping in the form of lib/sugar.mk - assorted style fixups (like ifeq usage) - clean.mk: reliability fix (the problem was observed by Oleg Ivanov and me too but finally it did get the attention quantum) - reviewed, updated and extended docs + QUICKSTART: should be[come] a step-by-step guide (thanks Leo-sp50 for prodiving feedback)
2011-10-06 12:46:31 +04:00
fi
drop autoconf, a few vars in .mk suffice A major change in approach largely thanks to discussions with Alexey Cheusov but also well aligned with my own findings: autoconf doesn't let the variables to form an inheritance. And data flow described at http://www.altlinux.org/WhiteLabel (which in its turn was born thanks to Gavin Henrick of Diva Telecom and to Alexander Bokovoy of SaM-Solutions) is really dependent on the existence of such an inheritance. Also: - distro.mk += try() - "hide" special targets - fixed wrt distro/.{base,init,metaconf}, thx gns@ - README updates + added metaconf.mk + clarifications - updated pci.ids location for hdt
2010-09-27 23:02:57 +04:00
image.in, main.mk: align debug targets Weird but the last round of image builds on e2k started complaining: Makefile:95: *** target file `debug' has both : and :: entries. Stop. Looks like these should have been fixed indeed. But why didn't this surface before then?
2017-08-07 21:49:47 +03:00
debug::
pass squashfs options from stage1 test to install2 This looks a bit weird (two subprofiles become a bit more tightly coupled) but in fact install2 does depend on stage1, and if stage1 doesn't create squashcfg.mk then install2 is just fine with defaults (provided they fit the installer kernel used). A proper mkimage test infrastructure might be handy though. Also there: - 01-initfs: partial cleanup (bootsplash is obsolete anyways) - regarding 03-test-kernel's errorlevel test: if 0, 1 and 2 need to be distinguished, "!" MUST NOT be used as it negates so that 0 becomes 1 and the rest becomes 0
2011-06-14 18:25:55 +04:00
@echo "TOPDIR=$(TOPDIR)"
main.mk introduced, lib/*.mk partially rewritten The former toplevel Makefile is now toplevel main.mk; this change allows for multi-target, multi-arch processing in the current toplevel Makefile. As the "build" symlink semantics change quite considerably when one is doing bulk builds (several pruned builddirs might be useful for comparison), BUILDDIR is now much more likely to be recreated: the cases when it will persist are when it's either a single-image build or when the prefix hasn't changed. There are some more or less subtle bugfixes and enhancements all over the map as well. Done within 20111230..20120102 timeframe, actually...
2011-12-30 14:46:58 +04:00
@echo "IMAGEDIR=$(IMAGEDIR)"
pass squashfs options from stage1 test to install2 This looks a bit weird (two subprofiles become a bit more tightly coupled) but in fact install2 does depend on stage1, and if stage1 doesn't create squashcfg.mk then install2 is just fine with defaults (provided they fit the installer kernel used). A proper mkimage test infrastructure might be handy though. Also there: - 01-initfs: partial cleanup (bootsplash is obsolete anyways) - regarding 03-test-kernel's errorlevel test: if 0, 1 and 2 need to be distinguished, "!" MUST NOT be used as it negates so that 0 becomes 1 and the rest becomes 0
2011-06-14 18:25:55 +04:00
@echo "ARCH=$(ARCH)"
non-native ARM support via qemu mkimage and hasher can make use of qemu to run non-native binaries while working on the chroots; thanks kas@, manowar@ and sbolshakov@ for implementing this functionality as well as providing nice examples through mkimage-profiles-arm and mkimage-profile-armrootfs. This required the architecture check to be added since baking a tarball with "arm" as its specified arch and x86_64 inside isn't particularly good thing to let slip through; however the implementation is quite fragile, bugreports and patches are seriously welcome. NB: APTCONF evaluation order between lazy make and nimble shell turned out to be quite a delicate issue in this particular case.
2012-07-09 22:50:57 +04:00
@echo "GLOBAL_TARGET=$(GLOBAL_TARGET)"
image.in: add INSTALL_LANGS variable to setup rpm _install_langs This option allows to make smallest images even smaller by reducing amount of installed locales.
2016-07-07 19:35:33 +03:00
@echo "GLOBAL_HSH_LANGS=$(GLOBAL_HSH_LANGS)"
pass squashfs options from stage1 test to install2 This looks a bit weird (two subprofiles become a bit more tightly coupled) but in fact install2 does depend on stage1, and if stage1 doesn't create squashcfg.mk then install2 is just fine with defaults (provided they fit the installer kernel used). A proper mkimage test infrastructure might be handy though. Also there: - 01-initfs: partial cleanup (bootsplash is obsolete anyways) - regarding 03-test-kernel's errorlevel test: if 0, 1 and 2 need to be distinguished, "!" MUST NOT be used as it negates so that 0 becomes 1 and the rest becomes 0
2011-06-14 18:25:55 +04:00
@echo "GLOBAL_HSH_APT_CONFIG=$(GLOBAL_HSH_APT_CONFIG)"
non-native ARM support via qemu mkimage and hasher can make use of qemu to run non-native binaries while working on the chroots; thanks kas@, manowar@ and sbolshakov@ for implementing this functionality as well as providing nice examples through mkimage-profiles-arm and mkimage-profile-armrootfs. This required the architecture check to be added since baking a tarball with "arm" as its specified arch and x86_64 inside isn't particularly good thing to let slip through; however the implementation is quite fragile, bugreports and patches are seriously welcome. NB: APTCONF evaluation order between lazy make and nimble shell turned out to be quite a delicate issue in this particular case.
2012-07-09 22:50:57 +04:00
@echo "GLOBAL_HSH_USE_QEMU=$(GLOBAL_HSH_USE_QEMU)"
Reference in New Issue Copy Permalink