mkimage-profiles/features.in/syslinux/config.mk

# default is plain text prompt
# NB: might be usbflash-ready hybrid iso
ifeq (,$(filter-out i586 x86_64,$(ARCH)))
use/syslinux: sub/stage1 $(ISOHYBRID:%=use/isohybrid)
	@$(call add_feature)
	@$(call add,STAGE1_PACKAGES,syslinux)
	@$(call try,META_SYSTEM_ID,SYSLINUX)
	@$(call try,BOOTVGA,normal)
	@$(call set,RELNAME,ALT ($(IMAGE_NAME)))
	@$(call set,IMAGE_PACKTYPE,boot)
else
use/syslinux: ; @:
endif

# UI is overwritten
use/syslinux/ui/%: use/syslinux
	@$(call set,SYSLINUX_UI,$*)
ifeq (,$(filter-out i586 x86_64,$(ARCH)))
	@if [ "$*" == gfxboot ]; then \
		$(call add,STAGE1_PACKAGES,gfxboot); \
		$(call add,STAGE1_BRANDING,bootloader); \
	fi
endif

# modules and config snippets just add up
use/syslinux/%.com use/syslinux/%.c32: use/syslinux
	@$(call add,SYSLINUX_MODULES,$*)

use/syslinux/%.cfg: use/syslinux
	@$(call add,SYSLINUX_CFG,$*)

use/syslinux/timeout/%: use/syslinux
	@$(call set,SYSLINUX_TIMEOUT,$*)
docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`# default is plain text prompt`
rework isoboot support beyond x86 Every .iso was assumed to be bootable since the very beginning[], and isoboot images were deemed to be x86 isolinux ones; this didn't change with basic ppc/armh support as I never ran into hardware that would _boot_ those ISOs, not only run the code, and it was only e2k isodata project that finally forced this refactoring. It's still not perfect: pack and syslinux features still end up somewhat interwoven, and too much places care for architecture the image is being built for (instead of archdep features tossing their appropriate bits and pieces in). Should help: - any-arch regarding isodata images; - {x86,aarch64}/efi by decoupling isoboot and isolinux; - ppc{,64} as introducing yaboot support will be easier now; - mipsel{,64} too, hopefully. I knew of school addon images baked with mkimage-profiles-desktop but postponed and then neglected the whole problem for years... 2018-07-25 15:40:56 +03:00			`# NB: might be usbflash-ready hybrid iso`
syslinux: X86 only 2019-07-02 21:59:32 +03:00			`ifeq (,$(filter-out i586 x86_64,$(ARCH)))`
rework isoboot support beyond x86 Every .iso was assumed to be bootable since the very beginning[], and isoboot images were deemed to be x86 isolinux ones; this didn't change with basic ppc/armh support as I never ran into hardware that would _boot_ those ISOs, not only run the code, and it was only e2k isodata project that finally forced this refactoring. It's still not perfect: pack and syslinux features still end up somewhat interwoven, and too much places care for architecture the image is being built for (instead of archdep features tossing their appropriate bits and pieces in). Should help: - any-arch regarding isodata images; - {x86,aarch64}/efi by decoupling isoboot and isolinux; - ppc{,64} as introducing yaboot support will be easier now; - mipsel{,64} too, hopefully. I knew of school addon images baked with mkimage-profiles-desktop but postponed and then neglected the whole problem for years... 2018-07-25 15:40:56 +03:00			`use/syslinux: sub/stage1 $(ISOHYBRID:%=use/isohybrid)`
introduced add_feature function The features might get copy-pasted (or even copied-and-pruned) when initialized; there's an unneccessary duplication of the function name in the line adding it to FEATURES list, thus prone to being forgotten and causing some havoc later on. It was wrong in the first place but tackling this with some double-colon rules ran into terminality issues, and further tortures were considered unneccessary. The current solution isn't perfect (no completely transparent function name registration upon corresponding target being called) but at least it is an improvement... 2011-11-16 19:58:42 +04:00			`@$(call add_feature)`
gfxboot brought to reasonable shape Also included: - reworked syslinux feature inclusion - syslinux: s/textprompt/prompt/ - README++ 2010-09-18 18:46:32 +04:00			`@$(call add,STAGE1_PACKAGES,syslinux)`
initial ISO9660 metadata support As was noted by Alexey Shabalin in libosinfo context, current ALT Linux images tend to lack ISO9660 metadata -- which they did have back in the day of Master 2.4. Please note that the data collection occurs this way due to mkimage's config.mk resetting the values to be empty; this was worked around by using another config file, $(BUILDDIR)lib/iso.mk, and including it later but that would require a separate target with per-target CONFIG variable which isn't elegant at all given the need to actually build up the metadata set. So the variables were changed (to be more readable anyways) and then proxied back to BOOT_*. This might be cleaned up some day after the inclusion order is tweaked or mkimage defaults get set-if-unset-yet (?=). 2012-03-26 23:23:28 +04:00			`@$(call try,META_SYSTEM_ID,SYSLINUX)`
syslinux: Use vga=normal This is more appropriate default value nowaday. 2017-10-13 17:10:05 +03:00			`@$(call try,BOOTVGA,normal)`
syslinux: update branding defaults s/ALT Linux/ALT/g as per s/ALT Linux/BaseALT/g Ltd 2016-12-26 16:11:21 +03:00			`@$(call set,RELNAME,ALT ($(IMAGE_NAME)))`
rework isoboot support beyond x86 Every .iso was assumed to be bootable since the very beginning[], and isoboot images were deemed to be x86 isolinux ones; this didn't change with basic ppc/armh support as I never ran into hardware that would _boot_ those ISOs, not only run the code, and it was only e2k isodata project that finally forced this refactoring. It's still not perfect: pack and syslinux features still end up somewhat interwoven, and too much places care for architecture the image is being built for (instead of archdep features tossing their appropriate bits and pieces in). Should help: - any-arch regarding isodata images; - {x86,aarch64}/efi by decoupling isoboot and isolinux; - ppc{,64} as introducing yaboot support will be easier now; - mipsel{,64} too, hopefully. I knew of school addon images baked with mkimage-profiles-desktop but postponed and then neglected the whole problem for years... 2018-07-25 15:40:56 +03:00			`@$(call set,IMAGE_PACKTYPE,boot)`
syslinux: X86 only 2019-07-02 21:59:32 +03:00			`else`
			`use/syslinux: ; @:`
			`endif`
proofreading of the merged commits File contents should be correct. 2012-09-12 20:34:17 +04:00
docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`# UI is overwritten`
syslinux configuration revisited - incompatible change (to fix the rather broken early style): use/syslinux/ui-% is now use/syslinux/ui/%; - default timeout changed to 9 seconds (long enough and keeps the countdown in a single figure); - added totaltimeout of 300 seconds; - provided live kiosk images with almost-instant boot by default; ...and some other assorted tweaks here and there, sorry. 2012-03-30 23:41:19 +04:00			`use/syslinux/ui/%: use/syslinux`
docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`@$(call set,SYSLINUX_UI,$*)`
syslinux: X86 only 2019-07-02 21:59:32 +03:00			`ifeq (,$(filter-out i586 x86_64,$(ARCH)))`
docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`@if [ "$*" == gfxboot ]; then \`
gfxboot brought to reasonable shape Also included: - reworked syslinux feature inclusion - syslinux: s/textprompt/prompt/ - README++ 2010-09-18 18:46:32 +04:00			`$(call add,STAGE1_PACKAGES,gfxboot); \`
initial branding feature As duly noted by glebfm@, branding issues need more attention by now since only stage1/install2 got some of it so far in this regard. Hence the dedicated feature comes to the rescue (well no, it doesn't actually mess with rescue!). 2012-04-25 15:18:23 +04:00			`$(call add,STAGE1_BRANDING,bootloader); \`
gfxboot brought to reasonable shape Also included: - reworked syslinux feature inclusion - syslinux: s/textprompt/prompt/ - README++ 2010-09-18 18:46:32 +04:00			`fi`
syslinux: X86 only 2019-07-02 21:59:32 +03:00			`endif`
features' day - get rid of $dest - work on features.in/syslinux - README++ 2010-09-14 14:18:53 +04:00
docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`# modules and config snippets just add up`
			`use/syslinux/%.com use/syslinux/%.c32: use/syslinux`
gfxboot brought to reasonable shape Also included: - reworked syslinux feature inclusion - syslinux: s/textprompt/prompt/ - README++ 2010-09-18 18:46:32 +04:00			`@$(call add,SYSLINUX_MODULES,$*)`

docs day ToC: - introduced doc/ - features.in/00example/ - READMEs and TODO for more - code comments clarified Some unrelated minor fixes bundled either. 2010-09-22 01:58:24 +04:00			`use/syslinux/%.cfg: use/syslinux`
gfxboot brought to reasonable shape Also included: - reworked syslinux feature inclusion - syslinux: s/textprompt/prompt/ - README++ 2010-09-18 18:46:32 +04:00			`@$(call add,SYSLINUX_CFG,$*)`
syslinux configuration revisited - incompatible change (to fix the rather broken early style): use/syslinux/ui-% is now use/syslinux/ui/%; - default timeout changed to 9 seconds (long enough and keeps the countdown in a single figure); - added totaltimeout of 300 seconds; - provided live kiosk images with almost-instant boot by default; ...and some other assorted tweaks here and there, sorry. 2012-03-30 23:41:19 +04:00
			`use/syslinux/timeout/%: use/syslinux`
			`@$(call set,SYSLINUX_TIMEOUT,$*)`