keremet/mkimage-profiles
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e1721ddec7
mkimage-profiles/conf.d/regular.mk

264 lines
11 KiB
Makefile
Raw Normal View History

initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
# regular build/usage images
ifeq (distro,$(IMAGE_CLASS))
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
# common ground (really lowlevel)
distro/.regular-bare: distro/.base +net-eth use/kernel/net
regular.mk: introduced regular-rescue This one was just asking to be built for quite a long time; http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs specifically accenting use of smartmontools 6.0 has finally persuaded me to roll out yet another rescue livecd, that is on the regular basis.
2013-03-03 23:54:53 +04:00
@$(call try,SAVE_PROFILE,yes)
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
# base target (for most images)
regular.mk: shuffle +wireless along It's all started with glebfm@ wondering why kernel-modules-v4l-std-def ends up installed with altlinux-p7-server-ovz.iso; this has been tossed in by kernel-modules-staging-std-def which has been requested by +wireless. WiFi support is nice to have handy when one hits a wifi-only device and no means to bring networking up (the infamous "unzip.zip" situation) but it's a bit too much to force a bunch of extra drivers specifically known for sub-par or unknown quality onto everyone installing an ALT Linux based server. So let's contain that feature to desktop/rescue images and exclude it from their common base with server ones.
2015-05-31 17:49:11 +03:00
distro/.regular-base: distro/.regular-bare use/memtest +efi; @:
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
x11: driver and purpose related refactoring This has had several goals: - a target suitable for x86 and armh providing a rather minimal set of base xorg packages and generic drivers; - task-oriented targets for graphics use cases: + "desktop" means rather 2D focus with 3D being welcome or even essential but not performance critical, thus "a slower driver is fine as long as it does work"; + "3d" means specific 3D performance being critical, that is "no 3D means no use at all". Regarding the free and proprietary 3D-capable drivers: the previous idea was to split out some common ground and then add the contenders on top of that; the current approach is based on the observation that the live images requiring proprietary NVIDIA/AMD drivers *by default* are usually of not much use with hardware that lacks proper 3D acceleration (like Tseng cards) or the driver support for that (like Matrox these days). Intel videodriver makes for a special case though: it is both free and top-notch performer. Thanks sem@ and boyarsh@ for discussion. PS: xorg-drv-{keyboard,mouse,void} dropped; those who need these can usually help themselves.
2013-05-30 21:06:39 +04:00
# graphical target (not enforcing xorg drivers or blobs)
regular.mk: shuffle +wireless along It's all started with glebfm@ wondering why kernel-modules-v4l-std-def ends up installed with altlinux-p7-server-ovz.iso; this has been tossed in by kernel-modules-staging-std-def which has been requested by +wireless. WiFi support is nice to have handy when one hits a wifi-only device and no means to bring networking up (the infamous "unzip.zip" situation) but it's a bit too much to force a bunch of extra drivers specifically known for sub-par or unknown quality onto everyone installing an ALT Linux based server. So let's contain that feature to desktop/rescue images and exclude it from their common base with server ones.
2015-05-31 17:49:11 +03:00
distro/.regular-x11: distro/.regular-base +vmguest +wireless \
regular.mk: make use of ACPI suspend support There's no excuse to miss it now that it's there.
2015-03-29 20:01:31 +03:00
use/live/x11 use/live/install use/live/suspend \
use/live/repo use/live/rw use/luks use/x11/wacom \
use/branding use/browser/firefox/live use/browser/firefox/i18n
regular.mk: pull desktop+regular in too Whoops, and I was mildly wondering where are alterator modules... thanks Speccyfighter again for bringing attention to the issue which has turned out to be ultimately caused by an overlooked bit being missing.
2013-03-13 02:37:33 +04:00
@$(call add,LIVE_LISTS,$(call tags,(base || desktop) && regular))
regular.mk: reduced rescue participation somewhat The regular images became a bit too fat and rescueish with all the good stuff going into rescue+extra pkglist; that stuff does belong to dedicated rescue images but not to each and every one. The base+rescue pkglist has been tailored to take this into account so we can now make regular-*.iso more fit too.
2013-04-22 23:29:41 +04:00
@$(call add,LIVE_LISTS,$(call tags,base rescue))
regular.mk: added livecd-install-apt-cache Carrying over metadata and packages downloaded by apt while being run off a LiveCD is implemented as suggested in #29192.
2013-09-27 20:15:02 +04:00
@$(call add,LIVE_PACKAGES,gpm livecd-install-apt-cache)
regular.mk: enable ntpd for desktops ...if any (and there should be some now).
2015-11-03 03:11:48 +03:00
@$(call add,DEFAULT_SERVICES_ENABLE,gpm ntpd)
regular.mk: allow EFI boot to make/use RW overlay propagator-20150306-alt1 and make-initrd-propagator-0.25-alt1 have made it actually possible to use resulting LiveCD images along with USB flash media to achieve data persistence that's been long available for BIOS boot mode (see also #28289). This isn't perfect but let's try flipping the switch: all desktop regular builds are now "live_rw" by default in EFI mode. This requires mkimage >= 0.2.17.
2015-03-09 21:23:22 +03:00
@$(call add,EFI_BOOTARGS,live_rw)
x11: driver and purpose related refactoring This has had several goals: - a target suitable for x86 and armh providing a rather minimal set of base xorg packages and generic drivers; - task-oriented targets for graphics use cases: + "desktop" means rather 2D focus with 3D being welcome or even essential but not performance critical, thus "a slower driver is fine as long as it does work"; + "3d" means specific 3D performance being critical, that is "no 3D means no use at all". Regarding the free and proprietary 3D-capable drivers: the previous idea was to split out some common ground and then add the contenders on top of that; the current approach is based on the observation that the live images requiring proprietary NVIDIA/AMD drivers *by default* are usually of not much use with hardware that lacks proper 3D acceleration (like Tseng cards) or the driver support for that (like Matrox these days). Intel videodriver makes for a special case though: it is both free and top-notch performer. Thanks sem@ and boyarsh@ for discussion. PS: xorg-drv-{keyboard,mouse,void} dropped; those who need these can usually help themselves.
2013-05-30 21:06:39 +04:00
regular.mk: split out a mixin Parts common to both livecd and installer images factored out to avoid duplication.
2013-11-13 20:38:57 +04:00
# common WM live/installer bits
mixin/regular-desktop: use/x11/xorg use/sound use/xdg-user-dirs
@$(call add,THE_PACKAGES,installer-feature-desktop-other-fs-stage2)
@$(call add,THE_PACKAGES,alterator-notes)
@$(call add,THE_BRANDING,alterator graphics indexhtml notes)
x11: driver and purpose related refactoring This has had several goals: - a target suitable for x86 and armh providing a rather minimal set of base xorg packages and generic drivers; - task-oriented targets for graphics use cases: + "desktop" means rather 2D focus with 3D being welcome or even essential but not performance critical, thus "a slower driver is fine as long as it does work"; + "3d" means specific 3D performance being critical, that is "no 3D means no use at all". Regarding the free and proprietary 3D-capable drivers: the previous idea was to split out some common ground and then add the contenders on top of that; the current approach is based on the observation that the live images requiring proprietary NVIDIA/AMD drivers *by default* are usually of not much use with hardware that lacks proper 3D acceleration (like Tseng cards) or the driver support for that (like Matrox these days). Intel videodriver makes for a special case though: it is both free and top-notch performer. Thanks sem@ and boyarsh@ for discussion. PS: xorg-drv-{keyboard,mouse,void} dropped; those who need these can usually help themselves.
2013-05-30 21:06:39 +04:00
# WM base target
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/.regular-wm: distro/.regular-x11 mixin/regular-desktop
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
# DE base target
# TODO: use/plymouth/live when luks+plymouth is done, see also #28255
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/.regular-desktop: distro/.regular-wm \
initial init feature This one is finally there and should help reduce the systemd-induced mess in package lists and specifications.
2013-06-03 12:03:23 +04:00
use/syslinux/ui/gfxboot use/firmware/laptop use/efi/refind +systemd
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
@$(call add,LIVE_LISTS,domain-client)
@$(call add,THE_BRANDING,bootloader)
regular.mk: added upower, bluez to desktops It's been noted by aris@ that the experimental regular-leechcraft.iso lacks both upower and bluez; let's try and add those missing to all of regular desktop images.
2015-05-27 20:12:43 +03:00
@$(call add,THE_PACKAGES,upower bluez)
regular.mk: tweak desktop services systemd-214 has major problems with starting these services, and KDC should definitely not even try to start up before setup (which is not feasible given that these are LiveCDs). domain-client pkglist inhabitants and net-usershares feature are nasty enough to bring a lot of extra garbage in unfortunately (alterator-auth, alterator-kdc, alterator-net-shares involved).
2014-06-30 23:42:49 +04:00
@$(call add,DEFAULT_SERVICES_DISABLE,gssd idmapd krb5kdc rpcbind)
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
@$(call set,KFLAVOURS,std-def)
regular.mk: switch from gdm2.20 to lightdm/gtk "regular-gtk" based images moved from the (unsupported) gdm2.20 to the (supported) lightdm with gtk greeter; while a couple of gdm2 forks have emerged it's still unclear whether mate or mint one will be actually alive, even short/mid-term.
2013-02-05 14:51:36 +04:00
distro/.regular-gtk: distro/.regular-desktop use/x11/lightdm/gtk +plymouth; @:
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/.regular-sysv: distro/.regular-wm +sysvinit; @:
regular.mk: tweaked .regular-sysv-gtk Looking as how every .regular-sysv-gtk descendant ended up using use/syslinux/ui/gfxboot by now it seems better to just stick it there.
2014-03-10 22:26:16 +04:00
distro/.regular-sysv-gtk: distro/.regular-sysv use/syslinux/ui/gfxboot \
regular.mk: use gdm2.20 for sysv-gtk based images It has dawned on me that gdm2.20 is more widely useful within sysvinit based builds: lightdm with gtk greeter would fail to poweroff/reboot while this one would not.
2014-03-28 13:45:09 +04:00
use/x11/gdm2.20; @:
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
regular.mk: .regular-bare -> .regular-base ...so base is base and bare is freed for a leaner entity...
2015-02-17 19:57:58 +03:00
distro/.regular-install: distro/.regular-base +installer +sysvinit +power \
regular.mk: use/install2/vnc This addition enables installation over VNC as suggested by frbrgeorge@. Maybe live images should carry x11vnc too, not sure yet.
2014-06-03 22:04:53 +04:00
use/branding use/bootloader/grub use/luks \
regular.mk: use/install2/repo within installers This has been requested by Matt Lewandowsky for hyperv server, I think it's just reasonable in other installers as well.
2014-06-04 16:40:11 +04:00
use/install2/fs use/install2/vnc use/install2/repo
regular.mk: pick up regular lists for installers A lot of packages that should be in the classic installable images got missed during initial effort; start merging the difference.
2013-11-28 17:38:17 +04:00
@$(call add,THE_LISTS,$(call tags,base regular))
regular.mk: regular-server refactoring distro/.regular-install is now factored out to be reused in tde based installer (and potentially more images later on). This implies sysvinit at the moment which might change too but looks just fine right now.
2013-11-13 17:42:01 +04:00
@$(call add,INSTALL2_BRANDING,alterator notes)
@$(call add,THE_BRANDING,alterator)
regular.mk: split out a mixin Parts common to both livecd and installer images factored out to avoid duplication.
2013-11-13 20:38:57 +04:00
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
# NB:
# - no +power or even use/power/acpi/button on intent
# - stock cleanup is not enough (or installer-common-stage3 deps soaring)
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
distro/regular-jeos: distro/.regular-bare use/isohybrid +sysvinit \
regular.mk: extend virtual guest support in jeos KVM and VirtualBox support packages are pretty tiny but essential when these images get deployed within virtual environments for any reason, let's add 'em.
2014-03-01 23:41:26 +04:00
use/branding use/bootloader/lilo use/syslinux/lateboot.cfg \
regular.mk: setup repo for jeos too It's a bit sad to hit a minimalistic environment with apt knowing no repositories at all...
2015-03-02 19:18:43 +03:00
use/install2/vmguest use/vmguest/base \
use/install2/repo use/install2/packages \
regular.mk: strip jeos further down It's still a GUI installer but pretty much barebone one by now... in particular, it needs no xorg-drv-$hardware being mostly targeted at VMs and demo appliances where fbdev is rather enough. Cleanup extra kernel drivers too.
2014-03-22 22:48:01 +04:00
use/install2/cleanup/everything use/install2/cleanup/kernel/everything \
net, net-eth, regular.mk: introduce use/net/etcnet This has been simply use/net but it looks like we've got some people who would like to cope without etcnet, even: http://lists.altlinux.org/pipermail/devel/2015-February/199506.html Adjust its usage accordingly.
2015-02-24 23:47:39 +03:00
use/cleanup/x11-alterator use/net/etcnet use/power/acpi/button
regular.mk: add vmware support to jeos flavour This should provide the fix for #30024 (thanks ildar@): vmware relies on mptspi.ko by default and that's been split out into scsi and not guest subpackage for led-ws. BTW use/install2/vmguest instead of a bunch.
2014-04-23 11:45:25 +04:00
@$(call add,BASE_KMODULES,guest scsi vboxguest)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
@$(call set,INSTALLER,altlinux-generic)
regular.mk: switch jeos to its own volumes-profile This image has been cleaned up somewhat thoroughly regarding its installed package base but partitioning has remained poorly generic with swap etc; it's now been set to use 3/4 Gb as a minimum (to fit 1Gb VMs or USB sticks just fine) with the only partition created being root one; those wishing something else are welcome to go ahead and partition by hand anyways. See also https://bugzilla.altlinux.org/30024
2015-03-10 13:28:10 +03:00
@$(call add,INSTALL2_PACKAGES,volumes-profile-jeos)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
@$(call add,INSTALL2_BRANDING,alterator notes)
@$(call add,THE_BRANDING,alterator) # just to be cleaned up later on
regular.mk: added dhcpcd, powerbutton handling to jeos A virtual machine lacking DHCP client seems much less useful, and being able to shut one down via emulated ACPI button press seems like no luxury either.
2014-05-12 00:28:23 +04:00
@$(call add,THE_PACKAGES,apt basesystem dhcpcd openssh vim-console)
regular.mk: added bash-completion to jeos It's half a megabyte but useful enough.
2015-03-02 19:24:46 +03:00
@$(call add,THE_PACKAGES,bash-completion)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
@# a *lot* of stray things get pulled in by alterator modules
regular.mk: dedup jeos a bit use/cleanup/x11 has been extended with commit 122c305, a few manually specified items can be dropped now.
2015-03-01 23:26:28 +03:00
@$(call add,CLEANUP_PACKAGES,libfreetype fontconfig)
@$(call add,CLEANUP_PACKAGES,'glib2*' libffi 'libltdl*')
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
@$(call add,CLEANUP_PACKAGES,liblcms libjpeg 'libpng*' 'libtiff*')
@$(call add,CLEANUP_PACKAGES,avahi-autoipd bridge-utils) # i-c-stage3
@$(call add,CLEANUP_PACKAGES,iw wpa_supplicant)
@$(call add,CLEANUP_PACKAGES,openssl libpcsclite)
@# fully fledged interactivesystem isn't needed here either
@$(call add,CLEANUP_PACKAGES,interactivesystem 'groff*' man stmpclean)
@$(call add,CLEANUP_PACKAGES,glibc-gconv-modules gettext)
@$(call add,CLEANUP_PACKAGES,console-scripts console-vt-tools 'kbd*')
@$(call add,CLEANUP_PACKAGES,libsystemd-journal libsystemd-login)
@$(call add,CLEANUP_PACKAGES,dbus libdbus libcap-ng)
regular.mk: "quiet" down jeos flavour This image doesn't deign to waste one's time by presenting them with a bootloader menu and a few other things; make it even less verbose where not neccessary.
2015-03-09 21:17:18 +03:00
@$(call add,STAGE2_BOOTARGS,quiet)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
regular.mk: add vmguest support to graphical installers Another fork place: live branch used to depend on +vmguest, installable one omitted that for some reason.
2013-12-25 02:52:00 +04:00
distro/.regular-install-x11: distro/.regular-install \
regular.mk: shuffle +wireless along It's all started with glebfm@ wondering why kernel-modules-v4l-std-def ends up installed with altlinux-p7-server-ovz.iso; this has been tossed in by kernel-modules-staging-std-def which has been requested by +wireless. WiFi support is nice to have handy when one hits a wifi-only device and no means to bring networking up (the infamous "unzip.zip" situation) but it's a bit too much to force a bunch of extra drivers specifically known for sub-par or unknown quality onto everyone installing an ALT Linux based server. So let's contain that feature to desktop/rescue images and exclude it from their common base with server ones.
2015-05-31 17:49:11 +03:00
use/install2/suspend mixin/regular-desktop +vmguest +wireless
regular.mk: use installer-distro-altlinux-desktop ...instead of installer-distro-desktop which pulls in alterator-auth which breaks things big time for sysv-tde installer image due to avahi-daemon lazy to run. Of course it's the last step of installation that has to fail. And I've been considering this for several months already anyways.
2013-12-23 22:49:15 +04:00
@$(call set,INSTALLER,altlinux-desktop)
regular.mk: pick up regular lists for installers A lot of packages that should be in the classic installable images got missed during initial effort; start merging the difference.
2013-11-28 17:38:17 +04:00
@$(call add,THE_LISTS,$(call tags,regular desktop))
regular.mk: regular-server refactoring distro/.regular-install is now factored out to be reused in tde based installer (and potentially more images later on). This implies sysvinit at the moment which might change too but looks just fine right now.
2013-11-13 17:42:01 +04:00
regular.mk: icewm += liberation Those URW fonts are scarey by today's standards :-( Unfortunately these are pulled in by seamonkey & co...
2014-10-14 22:11:55 +04:00
distro/regular-icewm: distro/.regular-sysv-gtk +icewm \
use/browser/seamonkey/i18n use/fonts/ttf/redhat
regular.mk: move -icewm packages to a pkglist There happened to be quite a few of those added while working with forum feedback but let's keep the makefile rather clean :-)
2013-03-24 22:11:27 +04:00
@$(call add,LIVE_LISTS,$(call tags,regular icewm))
regular.mk: added xpra and winswitch to icewm xpra.org and winswitch.org are wonderful applications helping one working with X11 apps all over the place, running those on local and remote desktops and servers with persistent sessions. These aren't exactly trivial to plan and use but icewm isn't for newbies either; thus these seem like nice match for an "X11 thin client" image. Size addition is ca. 50 Mb as of today which is a lot but worth it.
2015-03-09 16:06:40 +03:00
@$(call add,LIVE_PACKAGES,gparted mnt winswitch xpra)
regular.mk: use various kernels again un-def got unsuitable due to initial ramdisk migrating from initramfs to tmpfs by default in newer kernels, and propagator was using pretty kludgy way to determine that /dev has been mounted already; led-ws (and supposedly lks-wks) have stumbled upon this earlier. 20130822 version has been fixed regarding that.
2013-12-24 14:51:13 +04:00
@$(call set,KFLAVOURS,un-def)
regular.mk: added xxkb to regular-icewm Thanks aen@ for suggesting this.
2013-01-16 23:05:35 +04:00
regular.mk: move fonts from gnustep mixin to wmaker one Shame on me, gnustep mixin is only used in gnustep flavour while wmaker one is used in both gnustep and wmaker flavours. So the default serif fonts in regular-wmaker.iso were still ugly.
2015-03-12 02:22:14 +03:00
mixin/regular-wmaker: use/efi/refind use/syslinux/ui/gfxboot \
use/fonts/ttf/redhat use/x11/wmaker
regular.mk: added wmaker livecd-install button The setup has to be livecd-only thus made as a service, not a hook.
2013-03-11 22:21:31 +04:00
@$(call add,LIVE_PACKAGES,livecd-install-wmaker)
regular.mk: use plain autologin for wmaker lightdm isn't going to turn off the system properly with no systemd-logind around ("for no good reason", that is); good ol' wdm for installed system and the similarly ol' autologin just work though. nodm is not gonna cut it since user PATH is weird within the session breaking livecd-install by putting /usr/sbin before /usr/bin while it shouldn't be there in the first place.
2014-03-18 20:15:28 +04:00
@$(call add,LIVE_PACKAGES,installer-feature-no-xconsole-stage3)
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
@$(call add,MAIN_PACKAGES,wmgtemp wmhdaps wmpomme wmxkbru xxkb)
# wdm can't do autologin so add standalone one for livecd
distro/regular-wmaker: distro/.regular-sysv \
regular.mk: use/browser The logic is pretty much the same as with live.mk, even somewhat extended as this has actually been the driver of this change: some images like icewm or lxqt-based ones might show off other browsers explicitly (in addition to zerg@'s request).
2014-05-26 15:45:29 +04:00
mixin/regular-wmaker use/live/autologin use/browser/seamonkey/i18n
regular.mk: added wmxkbru to wmaker This one has been suggested by YYY: https://forum.altlinux.org/index.php?topic=35623.msg268496#msg268496
2015-10-29 17:57:44 +03:00
@$(call add,LIVE_PACKAGES,wdm wmxkbru)
regular.mk: initial regular-{wmaker,gnustep} Thanks aen@ for the whole pkglist and vast amounts of advice and inspiration; thanks real@ and kostyalamer for the packages themselves.
2013-03-01 21:08:33 +04:00
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
# gdm2.20 can reboot/halt with both sysvinit and systemd, and is slim
regular.mk: use/browser The logic is pretty much the same as with live.mk, even somewhat extended as this has actually been the driver of this change: some images like icewm or lxqt-based ones might show off other browsers explicitly (in addition to zerg@'s request).
2014-05-26 15:45:29 +04:00
mixin/regular-gnustep: use/x11/gnustep use/x11/gdm2.20 use/mediacheck \
live.mk, regular.mk: move plymouth to test mediacheck It was observed in regular-gnustep-20150916-*.iso that mediacheck boot target sort of starts plymouth bootsplash when not intended to; let's plug this by moving +plymouth away to a test image *but* there are couple things with it: 1) supporting plymouth in mediacheck *might* be a good thing for distros proper -- this will likely require some support on bootsplash theme side either; 2) it's not enough to just drop @bootargs@ from syslinux.cfg snippet as the extra payload will still go in to no avail.
2015-09-17 12:10:26 +03:00
use/browser/firefox/classic
regular.mk: initial regular-{wmaker,gnustep} Thanks aen@ for the whole pkglist and vast amounts of advice and inspiration; thanks real@ and kostyalamer for the packages themselves.
2013-03-01 21:08:33 +04:00
@$(call add,THE_BRANDING,graphics)
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
distro/regular-gnustep: distro/.regular-sysv \
mixin/regular-wmaker mixin/regular-gnustep; @:
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/regular-gnustep-systemd: distro/.regular-wm +systemd \
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
mixin/regular-wmaker mixin/regular-gnustep; @:
regular.mk: use/domain-client/full in "rich" images This is actually downplaying: the net effect is that a few images continue to carry krb5-ticket-watcher and have avahi service enabled by default while most of the images have one "weird" item less on their menus and a few hundred kilobytes less in total RSS. These are not really needed by default in lightweight distros sporting reduced application and services set, and the heavier ones will take relatively less hit by default while being more ready as ALT Domain clients (which was the whole motivation behind adding the feature and the corresponding pkglist).
2014-05-13 16:57:33 +04:00
distro/regular-xfce: distro/.regular-gtk \
regular.mk: kludge to ensure nm-applet is around Commit 78f2158 left those images which required NM but not its applet explicitly broken (as in "no applet at all"); this should probably be redone alike to browser feature but let's provide a 20140612 band-aid at least.
2014-06-12 17:57:53 +04:00
use/x11/xfce use/domain-client/full use/browser/firefox/classic \
regular.mk: added liberation fonts to xfce* Both Xfce-based images have been falling back to a completely wrong Monospace font alias implementation at least for ASCII part which resulted in hard to read Serif font in Terminal (even if e.g. Cyrillics are OK); adding Liberation seems to work around this. Too bad this commit didn't hit the recent starterkits.
2015-06-16 14:25:32 +03:00
use/fonts/ttf/redhat use/x11/gtk/nm +nm; @:
regular.mk: added fontconfig-infinality to lxde ...and refactored its use in cinnamon image too; this isn't a permanent solution though, slated to move into fonts feature. Thanks gns@ for suggestion.
2013-02-26 20:43:24 +04:00
regular.mk: font tweaks for test images Both kde5 and xfce-sysv have received their fair share of criticism for substandard fonts; zerg@ has proposed adding droid fonts to the former and someone expressed their frustration with Terminal fonts in the latter: http://www.opennet.ru/openforum/vsluhforumID3/104750.html#70 Let's try to make some difference between Xfce based flavours as well by changing the kernel to a bit more "bleeding" one as proposed either.
2015-09-18 21:12:24 +03:00
distro/regular-xfce-sysv: distro/.regular-sysv-gtk \
use/init/sysv/polkit use/x11/xfce \
use/fonts/ttf/redhat use/fonts/otf/adobe use/fonts/otf/mozilla
@$(call set,KFLAVOURS,un-def)
regular.mk: added a few packages to xfce-sysv These have been asked for by Speccyfighter: http://forum.altlinux.org/index.php/topic,34428.msg256990.html#msg256990
2015-06-16 12:43:37 +03:00
@$(call add,LIVE_PACKAGES,xfce4-mixer pm-utils bc elinks mpg123)
regular.mk, p7.mk: initial xfce-sysv flavour This one has been requested by a user over at #altlinux and seems working, at least when built on p7/branch.
2015-03-29 17:57:16 +03:00
regular.mk: kludge to ensure nm-applet is around Commit 78f2158 left those images which required NM but not its applet explicitly broken (as in "no applet at all"); this should probably be redone alike to browser feature but let's provide a 20140612 band-aid at least.
2014-06-12 17:57:53 +04:00
distro/regular-lxde: distro/.regular-gtk use/x11/lxde use/fonts/infinality \
regular.mk: add IM support to some desktop images Wish this was done before starterkits alpha but still; here are the preliminary (unqualified) test results: - cinnamon: OK (vi_VN, zh_CN, ko_KR) - gnome3: no way to change the hotkey; menu font troubles - kde4: OK but lacks corresponding localization subpackages - lxde: OK (vi_VN, zh_CN, ko_KR) - lxqt: imsettings-xfce somehow gets in (unrequested!) - mate: unable to change hotkey, applet complains to stderr - tde: native apps don't recognize ibus input
2015-09-02 16:34:58 +03:00
use/x11/gtk/nm use/im +nm
regular.mk: get gvfs back into lxde flavour aen@ has suggested that gvfs support be present in regular-lxde as pcmanfm2 can make use of it; let's factor it back in here.
2013-08-13 22:21:26 +04:00
@$(call add,LIVE_LISTS,$(call tags,desktop gvfs))
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
xmonad: add livecd-regular-xmonad
2013-02-27 01:32:50 +04:00
distro/regular-xmonad: distro/.regular-gtk use/x11/xmonad
@$(call add,LIVE_PACKAGES,livecd-regular-xmonad)
regular.mk: add regular-xmonad
2013-02-18 01:53:06 +04:00
regular.mk: added google fonts to regular-mate This aims to work around URW fonts deficiencies combined with the relatively high position of their standard ones in default /etc/fonts/conf.avail/60-alt-post-user.conf; see also #30293, #30294.
2014-09-12 19:51:55 +04:00
distro/regular-mate: distro/.regular-gtk +nm \
use/x11/mate use/fonts/ttf/google use/domain-client/full
x11: added use/x11/mate target It was implemented in a pretty quick-and-dirty way for regular-mate back then, clean things up a bit. Package lists should be deduplicated either but that's another story.
2013-06-11 19:24:29 +04:00
@$(call add,LIVE_LISTS,$(call tags,mobile mate))
live.mk, regular.mk: use desktop+sane I decided that it's worth the added size to sprinkle more hardware-related packages like SANE throughout the regular crop so that compatibility tests are easier to do; there's sane usage in there already, let's port live-gimp over too.
2015-07-03 12:59:03 +03:00
@$(call add,LIVE_LISTS,$(call tags,desktop sane))
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
regular.mk: added regular-e18-sysv.iso It's preliminary but rather working by now; one of the main woes is #29497 so far. xterm has been overduplicated, moved to pkglists for clarity.
2014-03-10 21:48:54 +04:00
distro/regular-e17: distro/.regular-gtk use/x11/e17 use/fonts/infinality; @:
regular.mk: e19 -> enlightenment The packages have been renamed quite some time ago indeed, and dancing image URLs don't help a lot.
2015-10-29 16:56:47 +03:00
distro/regular-enlightenment: distro/.regular-gtk \
use/x11/enlightenment use/fonts/infinality; @:
distro/regular-enlightenment-sysv: distro/.regular-sysv-gtk \
use/x11/enlightenment; @:
regular.mk: added regular-e18.iso Thanks aris@ there are now e18 packages available; everything is almost the same distribution-wise.
2013-12-09 22:46:19 +04:00
regular.mk: use lightdm instead of gdm3 for cinnamon ...and switch to cinnamon-regular metapackage in general: the remaining blocker being gdm required by that and not actually going to work (it used to start gnome-shell which wouldn't work in that configuration either) is now fixed, thanks cow@. PS: plymouth is moved upstream, drop the dup.
2013-05-28 13:04:03 +04:00
distro/regular-cinnamon: distro/.regular-gtk \
regular.mk: add IM support to some desktop images Wish this was done before starterkits alpha but still; here are the preliminary (unqualified) test results: - cinnamon: OK (vi_VN, zh_CN, ko_KR) - gnome3: no way to change the hotkey; menu font troubles - kde4: OK but lacks corresponding localization subpackages - lxde: OK (vi_VN, zh_CN, ko_KR) - lxqt: imsettings-xfce somehow gets in (unrequested!) - mate: unable to change hotkey, applet complains to stderr - tde: native apps don't recognize ibus input
2015-09-02 16:34:58 +03:00
use/x11/cinnamon use/fonts/infinality use/net/nm/mmgui use/im
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
@$(call set,META_VOL_ID,ALT Linux $(IMAGE_NAME)) # see also #28271
regular.mk: cinnamon to use un-def Current Sisyphus' xorg-drv-intel works somewhat better with recent kernel drivers on my HD4000 GPU, and icewm is not compositing at all; providing another test/backup image fitted with newer kernel should do no harm.
2014-03-19 01:15:12 +04:00
@$(call set,KFLAVOURS,un-def)
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
regular.mk: explicitly add NM to a few images As it happens regular-rc testing has shown that cinnamon, gnome3 and kde4 flavours included NM via their pkglists and dependencies (which used to result in live feature enabling NetworkManager service wholesale when found); now when handling default services has become more strict it became apparent that these images have got their LiveCD mode running without network by default (installation does set that up though). It looks like an easy way to just stick +nm into .regular-desktop dependencies but then razorqt, sugar, xmonad would get NM which is not what they're gonna handle; e17/e18 too.
2014-03-18 13:52:44 +04:00
# not .regular-gtk due to gdm vs lightdm
regular.mk: add liberation fonts to gnome3 epiphany (or fontconfig?) insists on URW fonts for rendering webpages like http://opennet.ru which hurts my eyes; looks like /etc/fonts/conf.d/60-alt-post-user.conf would override these with e.g. Liberation or Dejavu (with the latter being inferior to the former, IMHO).
2015-02-18 18:44:51 +03:00
distro/regular-gnome3: distro/.regular-desktop +plymouth +nm \
use/x11/gnome3 use/browser/epiphany use/fonts/ttf/redhat
regular.mk: update package name There's no more livecd-gnome3-nosetup, it's been renamed to setup-gnome3-done with no P:/O: to reduce repo spam. Should have cherry-picked this into master back then :-/
2014-11-28 23:16:32 +03:00
@$(call add,LIVE_PACKAGES_REGEXP,^setup-gnome3-done.*)
regular.mk: added templates to gnome3 This has been proposed and largely implemented by antohami@, see also #30851.
2015-09-06 14:45:28 +03:00
@$(call add,LIVE_PACKAGES,gnome3-regular xcalib templates)
regular.mk: added flashback session to gnome3 This one adds a "classic" GNOME2-like session; one needs to select it by hand though, and gdm won't bother them with a selector "gear" widget unless there's a password set for the user. Thus no autologin without explicit session specification seems possible so far. Note that there's no way to have gdm without gnome-shell currently.
2015-10-29 16:11:35 +03:00
@$(call add,LIVE_PACKAGES,gnome-flashback)
regular.mk: initial regular-gnome3 It would be great to have #28289 fixed either so that aris@ could approve the image as usable (I totally agree that it's a major piece of real world functionality currently missing) looks like there's sense to prepare a starter iso for tests.
2013-01-15 19:00:59 +04:00
regular.mk: sync regular-tde{,-sysv} as in extras I considered these two to be either close forks differing in init system used (and things involved too much like NM at the moment), or to bring some more choice along; this commit sticks with the former approach, namely "let's only toggle the init system and let the rest be the same" so that choosing the particular implementation can be based on this very difference and not any other ones added along with it.
2013-10-30 15:29:18 +04:00
# reusable bits
regular.mk: removed plymouth from tde/sysv images It's been both somewhat problematic as of plymouth-0.9.x due to broken rendering and explicitly asked for by asy@ regarding sysv-tde starterkit which makes sense for an image targeting low-resource systems as well.
2015-05-31 15:17:03 +03:00
mixin/regular-tde: +tde \
regular.mk: better fonts for gnustep/tde flavours The problem is URW again (just as in commit ab44f80), and the workaround is the same either.
2015-03-05 20:39:12 +03:00
use/syslinux/ui/gfxboot use/browser/firefox/classic use/fonts/ttf/redhat
regular.mk: dropped kdegames from tde mixin mixin/regular-tde is used in sysv-tde flavour which has hit 700M limit for CD-R as Speccyfighter has noted; we can do without games probably, or at least let's try to. http://lists.altlinux.org/pipermail/community/2014-January/681534.html
2014-01-30 19:30:29 +04:00
@$(call add,THE_PACKAGES,kdeedu)
regular.mk: disable upower, bluez for tde images These make no sense as kdebluetooth is officially broken in TDE 3.5.13 and hal is used for power management.
2015-05-31 15:25:50 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,upower bluez)
regular-tde: added NetworkManager Suggested by rom_as@; see also #25713 at the moment.
2013-01-08 02:44:40 +04:00
regular.mk: removed plymouth from tde/sysv images It's been both somewhat problematic as of plymouth-0.9.x due to broken rendering and explicitly asked for by asy@ regarding sysv-tde starterkit which makes sense for an image targeting low-resource systems as well.
2015-05-31 15:17:03 +03:00
distro/regular-tde: distro/.regular-desktop mixin/regular-tde +plymouth \
regular.mk: moved openscada to regular-tde It's been added to al of tde-based images but it looks like LiveCDs make more sense, and it's the regular-tde.iso that hits both regular builds and starterkits; let's put it there and hope it gets spotted appropriately.
2015-05-31 16:52:40 +03:00
use/x11/gtk/nm use/net/nm/mmgui
@$(call add,THE_LISTS,openscada)
regular.mk: sync regular-tde{,-sysv} as in extras I considered these two to be either close forks differing in init system used (and things involved too much like NM at the moment), or to bring some more choice along; this commit sticks with the former approach, namely "let's only toggle the init system and let the rest be the same" so that choosing the particular implementation can be based on this very difference and not any other ones added along with it.
2013-10-30 15:29:18 +04:00
regular.mk: tde bits: move to mixin distro/.regular-tde-extras is now mixin/regular-tde which pulls in several extra bits in addition to just the lists.
2013-11-13 17:30:44 +04:00
distro/regular-tde-sysv: distro/.regular-sysv mixin/regular-tde \
use/net-eth/dhcp use/efi/refind; @:
regular.mk: more sysvinit-based images distro/.regular-sysv{,-gtk} intermediate targets are factored out to form the base for more image targets as at least e17, icewm, tde and wmaker are fine without systemd-logind. These represent both GTK and Qt based environments hence the two footholds.
2013-10-14 20:59:05 +04:00
regular.mk: use/x11/kde4/nm instead of pkglist This was the only user of that branch-specific pkglist.
2014-06-09 20:18:29 +04:00
distro/regular-kde4: distro/.regular-desktop use/x11/kde4/nm use/x11/kdm4 \
regular.mk: use/browser The logic is pretty much the same as with live.mk, even somewhat extended as this has actually been the driver of this change: some images like icewm or lxqt-based ones might show off other browsers explicitly (in addition to zerg@'s request).
2014-05-26 15:45:29 +04:00
use/browser/konqueror4 use/fonts/zerg use/domain-client/full \
regular.mk: use/net/nm/mmgui in a few images Namely cinnamon, tde and kde4 flavours for the starters.
2014-08-20 17:29:37 +04:00
use/net/nm/mmgui +pulse +plymouth
regular.mk, regular+kde4: move to pkglist A few more additions proposed by Sluggard: http://www.opennet.ru/openforum/vsluhforumID3/101671.html#182 ...and it seems like LIVE_PACKAGES are asking for a pkglist; let's switch to THE_PACKAGES for remainder while at that.
2015-03-11 13:41:27 +03:00
@$(call add,THE_LISTS,$(call tags,regular kde4))
@$(call add,THE_PACKAGES,volumes-profile-lite gparted)
regular.mk: ensure prefdm startup for kdm4 This hasn't been tweaked for systemd-214 yet, and regular-kde4.iso should yield GUI at least.
2014-07-01 21:19:28 +04:00
@$(call add,DEFAULT_SERVICES_ENABLE,prefdm)
regular.mk: added NM plasmoid to regular-kde4 Suggested by zerg@, aen@ and myself upon testing. Happens to work these days, hooray!
2013-01-17 19:22:43 +04:00
regular.mk: move lxqt to sddm lxqt-lightdm-greeter is finally *really* deprecated, LXQt's build system has changed enough to warrant its FTBFS without the same changes. Note that this won't cut it for p7 starterkits anymore.
2015-11-03 02:20:12 +03:00
mixin/regular-lxqt: use/x11/lxqt use/x11/sddm \
regular.mk: switched lxqt to connman It used to run NM without any kind of applet which is not exactly usable unless it's DHCP over Ethernet there; provide connman and qconnman-ui (applets on the road).
2015-03-11 00:52:54 +03:00
use/net/connman use/browser/qupzilla +plymouth
@$(call add,THE_PACKAGES,qconnman-ui)
regular.mk: initial regular-lxqt-sysv This has been asked for by lewellyn@freenode, why not. NB: distro/.regular-sysv doesn't include use/net-eth/dhcp (as it looks like asking for) since there's still hope to get NM cooperating with sysvinit again.
2014-10-29 18:09:43 +03:00
regular.mk: switched lxqt to connman It used to run NM without any kind of applet which is not exactly usable unless it's DHCP over Ethernet there; provide connman and qconnman-ui (applets on the road).
2015-03-11 00:52:54 +03:00
distro/regular-lxqt: distro/.regular-desktop mixin/regular-lxqt; @:
regular.mk: initial regular-lxqt-sysv This has been asked for by lewellyn@freenode, why not. NB: distro/.regular-sysv doesn't include use/net-eth/dhcp (as it looks like asking for) since there's still hope to get NM cooperating with sysvinit again.
2014-10-29 18:09:43 +03:00
distro/regular-lxqt-sysv: distro/.regular-sysv mixin/regular-lxqt \
use/net-eth/dhcp use/efi/refind; @:
regular.mk: initial regular-lxqt Seems working already.
2014-05-13 22:23:21 +04:00
x11: added generic sugar ...and introduced regular-sugar flavour immediately, it's rather working by now.
2013-03-17 00:20:50 +04:00
distro/regular-sugar: distro/.regular-gtk use/x11/sugar; @:
regular.mk: added regular-leechcraft An initial draft.
2015-05-02 15:57:18 +03:00
distro/regular-leechcraft: distro/.regular-desktop \
regular.mk: added PA to LCDE LiveCD would hang with "Initializing Azoth: first stage" during startup otherwise; see ~/.leechcraft/warning.log
2015-05-27 19:45:19 +03:00
use/x11/leechcraft use/x11/lightdm/lxqt +pulse; @:
regular.mk: added regular-leechcraft An initial draft.
2015-05-02 15:57:18 +03:00
regular.mk: initial kde5 flavour This is known to work using 5.2.2/5.3.0 packages but is still pretty basic regarding functionality.
2015-04-20 22:06:44 +03:00
distro/regular-kde5: distro/.regular-desktop \
regular.mk: font tweaks for test images Both kde5 and xfce-sysv have received their fair share of criticism for substandard fonts; zerg@ has proposed adding droid fonts to the former and someone expressed their frustration with Terminal fonts in the latter: http://www.opennet.ru/openforum/vsluhforumID3/104750.html#70 Let's try to make some difference between Xfce based flavours as well by changing the kernel to a bit more "bleeding" one as proposed either.
2015-09-18 21:12:24 +03:00
use/x11/kde5 use/x11/sddm \
use/fonts/ttf/google use/fonts/ttf/redhat use/fonts/zerg \
+nm +pulse +plymouth
regular.mk: added kde5-telepathy to kde5 flavour This one conflicts with kde4 so isn't included into kde5-big metapackage [yet]; just add by hand.
2015-07-23 17:41:16 +03:00
@$(call add,THE_PACKAGES,kde5-telepathy)
regular.mk: initial kde5 flavour This is known to work using 5.2.2/5.3.0 packages but is still pretty basic regarding functionality.
2015-04-20 22:06:44 +03:00
regular.mk: regular-rescue gfxboot warning This should better lurk here unless someone (including myself) either forgets or doesn't realize the inobvious chain of the assumptions made for the read-only warranty to actually work.
2014-05-19 13:42:44 +04:00
# NB: never ever use/syslinux/ui/gfxboot here as gfxboot mangles
# kernel cmdline resulting in method:disk instead of method:cdrom
# which will change propagator's behaviour to probe additional
# filesystems (ro but no loop) thus potentially writing to
# an unrecovered filesystem's journal
regular.mk: .regular-bare -> .regular-base ...so base is base and bare is freed for a leaner entity...
2015-02-17 19:57:58 +03:00
distro/regular-rescue: distro/.regular-base use/rescue/rw use/luks \
regular.mk: rescue should use branding Well actually it shouldn't -- except for rEFInd the boot manager: branding graphics within the build environment are used to add a single background image to EFI/refind/icons/ thus the change. Wonder how this got lost though as this screenshot: http://en.altlinux.org/File:Altlinux-rescue-uefi-memtest86.jpg clearly illustrates it was working back in December indeed!
2014-03-14 00:06:11 +04:00
use/branding use/efi/refind use/efi/shell use/efi/memtest86 \
regular.mk: rescue with remote access and a minute The goal of implementing rescue_remote was regular-rescue.iso indeed; so let's both add it and bump the default boot timeout to 600 deciseconds, that is, a minute: 20 seconds might be way too low for some slow IP-KVM/iKVM use cases.
2015-06-01 15:26:14 +03:00
use/hdt use/syslinux/ui/menu use/syslinux/timeout/600 \
use/syslinux/rescue_fm.cfg use/syslinux/rescue_remote.cfg \
regular.mk: rescue uses sysvinit ...now explicitly. The problem started with systemd being tossed in but was ignored for some time -- until systemd-221-alt1 gained X11 dependency through /etc/X11/xinit.d/ script and triggered the libX11 test that breaks regular-rescue.iso build. pam_systemd and systemd-services still get in (and can be removed by hand with nothing else requiring those).
2015-06-29 17:24:15 +03:00
use/mediacheck test/rescue/no-x11 +wireless +sysvinit
regular.mk: use various kernels again un-def got unsuitable due to initial ramdisk migrating from initramfs to tmpfs by default in newer kernels, and propagator was using pretty kludgy way to determine that /dev has been mounted already; led-ws (and supposedly lks-wks) have stumbled upon this earlier. 20130822 version has been fixed regarding that.
2013-12-24 14:51:13 +04:00
@$(call set,KFLAVOURS,un-def)
regular.mk: rescue with remote access and a minute The goal of implementing rescue_remote was regular-rescue.iso indeed; so let's both add it and bump the default boot timeout to 600 deciseconds, that is, a minute: 20 seconds might be way too low for some slow IP-KVM/iKVM use cases.
2015-06-01 15:26:14 +03:00
@$(call add,RESCUE_PACKAGES,gpm livecd-net-eth)
regular.mk: added smartcard support This has been an old TODO item either.
2015-09-08 12:03:54 +03:00
@$(call add,RESCUE_LISTS,$(call tags,base smartcard))
regular.mk: introduced regular-rescue This one was just asking to be built for quite a long time; http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs specifically accenting use of smartmontools 6.0 has finally persuaded me to roll out yet another rescue livecd, that is on the regular basis.
2013-03-03 23:54:53 +04:00
regular.mk, p7.mk: initial sysvinit tde installer I've been considering a way to avoid confusion between: - a tde based livecd with systemd; - a tde based livecd with sysvinit; - a tde based installer with sysvinit and finally came to conclusion that regular-sysv prefix will be common for installers with sysvinit within regular.mk and p7.mk; this might be not perfect but should be good enough. Note that while regular-sysv-tde.iso is buildable and installs just fine at the moment I don't plan to publish Sisyphus based installer builds as a rule since these require extra knowledge regarding daily use (starting with http://altlinux.org/changes and/or https://lists.altlinux.org/mailman/listinfo/sisyphus ML subscription). Sisyphus-based rescue image is fine as well as LiveCDs are; installable LiveCDs (most of regular-*.iso) are actually risky in case user actually installs *and* updates those having ignored the red "unstable" status in the branding, and that's the line I'm not going to cross that often.
2013-11-13 17:42:30 +04:00
distro/regular-sysv-tde: distro/.regular-install-x11 \
regular.mk: extend FS support for sysv-tde This is a somewhat "advanced" flavour, extra filesystems seem reasonable.
2014-12-16 17:11:13 +03:00
mixin/desktop-installer mixin/regular-tde use/install2/fs \
regular.mk: once-only slideshow for sysv-tde TDE images are pretty modest regarding resource consumption thus suitable for older hardware; a slower flash drive can stall indefinitely showing slideshow and not going any further with actual package installation so let's put a cap on that.
2014-03-10 21:46:38 +04:00
use/branding/complete use/branding/slideshow/once \
regular.mk: oops, sysv-tde needs better fonts too This has missed 20140912 starterkits unfortunately, nightly builds excluding installers didn't catch it and beta testing hasn't uncovered this either.
2014-09-12 18:20:30 +04:00
use/net-eth/dhcp use/efi/refind use/efi/shell use/rescue/base \
use/fonts/otf/adobe use/fonts/otf/mozilla
regular.mk: beef up sysv-tde a bit Suddenly got lots of extra space to wa^H^Hfill due to led-ws thus a few more FRs by Speccyfighter can go in ;-)
2013-12-25 02:14:26 +04:00
@$(call add,RESCUE_LISTS,$(call tags,rescue misc))
regular.mk: regular-sysv-tde tweaks It lacked base desktop packages indeed; thanks Speccyfighter for naming rsync and wget (as well as mc).
2014-01-30 19:22:58 +04:00
@$(call add,THE_LISTS,$(call tags,base desktop))
regular.mk: moved bits to regular+tde This is a no-op commit to clean up the mess a bit.
2014-05-26 23:25:17 +04:00
@$(call add,THE_LISTS,$(call tags,regular tde))
regular.mk, regular+tde: be careful with kpowersave I don't know of [k]powersave interactions with systemd and the rest of that ilk, let's be cautious and only provide it for sysv-tde images which have been actually tested by Speccyfighter who asked for this package. Can't tell for sure but something seems to break suspend menu option (hibernate isn't supported in all of the regular builds/starterkits just yet).
2015-03-12 01:26:05 +03:00
@$(call add,THE_PACKAGES,kpowersave)
regular.mk: added anacron to regular-sysv-tde It's been asked for by asy@ and added to available packages, not to base installation.
2015-05-31 15:15:51 +03:00
@$(call add,MAIN_PACKAGES,anacron man-whatis usb-modeswitch)
regular.mk, p7.mk: initial sysvinit tde installer I've been considering a way to avoid confusion between: - a tde based livecd with systemd; - a tde based livecd with sysvinit; - a tde based installer with sysvinit and finally came to conclusion that regular-sysv prefix will be common for installers with sysvinit within regular.mk and p7.mk; this might be not perfect but should be good enough. Note that while regular-sysv-tde.iso is buildable and installs just fine at the moment I don't plan to publish Sisyphus based installer builds as a rule since these require extra knowledge regarding daily use (starting with http://altlinux.org/changes and/or https://lists.altlinux.org/mailman/listinfo/sisyphus ML subscription). Sisyphus-based rescue image is fine as well as LiveCDs are; installable LiveCDs (most of regular-*.iso) are actually risky in case user actually installs *and* updates those having ignored the red "unstable" status in the branding, and that's the line I'm not going to cross that often.
2013-11-13 17:42:30 +04:00
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/.regular-server: distro/.regular-install \
regular.mk: drop alterator GUI from server images The issue at hand is that some sneaky stage3 alterator modules seem to have tossed alterator-browser-qt (thus libqt4* and friends) into base server installations; while this must be solved in within package base and should be worked around by server feature probably let's start out with leaf targets.
2015-02-18 22:26:59 +03:00
use/server/mini use/rescue/base use/cleanup/x11
regular.mk: pick up regular lists for installers A lot of packages that should be in the classic installable images got missed during initial effort; start merging the difference.
2013-11-28 17:38:17 +04:00
@$(call add,THE_LISTS,$(call tags,regular server))
regular.mk: added aptitude to server image Dank Bagryantsev asked if it could be added to available packages at least; well it is there now but not in default install as aptitude is currently unsupported.
2013-12-30 20:40:44 +04:00
@$(call add,MAIN_PACKAGES,aptitude)
regular.mk: regular-server tweaks LUKS seems like a worthwile addition to this particular image; it's also switched to use installer-distro-altlinux-server for both LUKS support (until installer-steps are dynamic) and server-oriented partitioning presets.
2013-10-14 14:25:29 +04:00
@$(call set,INSTALLER,altlinux-server)
regular.mk: purge qt4 from installed server images It's not use/cleanup/x11-alterator in its entirety but qt4-core is really *really* not needed there.
2015-03-09 21:52:34 +03:00
@$(call add,CLEANUP_PACKAGES,qt4-common)
regular.mk: disable bridge service This has been proposed for server-hyperv by lewellyn@freenode last summer, looks like a reasonable default for all of the server images as those interersted in bridge setup are going to do a few more things anyways.
2015-03-10 13:46:59 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,bridge)
regular.mk: initial regular-server A simple server image has been a pretty popular request roughly always; thanks asy@ for specification draft.
2013-05-24 17:37:49 +04:00
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/regular-server: distro/.regular-server use/cleanup/x11-alterator; @:
regular.mk, p7.mk: added server-ovz This image is largely a rebase of server-ovz.iso onto regular-server; it's not feasible to provide a single image that would install either "mini" server or openvz/kvm one based on user choice during boot alas (even if both ovz-el and std-def kernels are provided within "ovz" ISO and vzctl&co could be stuffed into a package list/group). Maybe this is fixed some day...
2014-02-26 15:38:50 +04:00
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/.regular-server-managed: distro/.regular-server
regular.mk: minor server-hyperv tweaks Matt Lewandowsky suggested that alteratord be enabled but ahttpd be disabled so as to avoid extra port being listened to out-of-box but to be able to turn web GUI on when needed.
2014-06-11 22:21:41 +04:00
@$(call add,THE_PACKAGES,alterator-fbi)
regular.mk: added a few alterator modules to server-hyperv As proposed by Matt Lewandowsky.
2014-06-10 18:57:44 +04:00
@$(call add,THE_LISTS,$(call tags,server alterator))
regular.mk: disabled alteratord for server-hyperv Makes no sense without ahttpd anyways; thanks lewellyn@freenode again. Disable bridge service as well (gotta figure out what pulls it in).
2014-09-08 22:17:12 +04:00
@$(call add,DEFAULT_SERVICES_DISABLE,ahttpd alteratord)
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/regular-server-ovz: distro/.regular-server-managed \
use/server/ovz use/server/groups/base
regular.mk: added vzstats group to server-ovz This is our answer to this VZstats FAQ entry: Q: Why is it opt-out rather than opt-in? A: We just don't have a good place (such as installer or some GUI) to ask you for opt-in. Well ALT Linux got one. :)
2015-05-19 17:53:28 +03:00
@$(call add,MAIN_GROUPS,vzstats)
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/regular-server-hyperv: distro/.regular-server-managed
@$(call set,KFLAVOURS,un-def)
@$(call add,INSTALL2_PACKAGES,ntfs-3g)
@$(call add,THE_PACKAGES,hyperv-daemons)
regular.mk: disabled alteratord for server-hyperv Makes no sense without ahttpd anyways; thanks lewellyn@freenode again. Disable bridge service as well (gotta figure out what pulls it in).
2014-09-08 22:17:12 +04:00
@$(call add,DEFAULT_SERVICES_DISABLE,bridge cpufreq-simple)
regular.mk: add regular-server-un-def For lewellyn@freenode and his Hyper-V Generation 2 VM, regular-rescue happens to boot there.
2014-03-18 21:12:21 +04:00
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
distro/regular-builder: distro/.regular-bare \
use/dev/builder/full +sysvinit +efi +power \
regular.mk, p7.mk: builder image So ALT Linux has got decent build tools but no one even knows about those, right? And starting to use those is somewhat tedious as it requires ALT installation with a specially crafted user account? live-builder.iso has been useful enough to consider including its relative into starterkits skipping regular builds for roughly the same reasons as those for installers: we're better off helping users to get onto the stable platform bandwagon than having them excited with Sisyphus just to hit some wall down the road (even if we warn of these walls well in advance most of the time), and while packages tend to get into branches via sisyphus repo it's still better to stay on the safe side with what we make easily available.
2014-12-10 22:16:11 +03:00
use/live/base use/live/rw use/live/repo/online use/live/textinstall \
use/isohybrid use/syslinux/timeout/30 \
use/stage2/net-eth use/net-eth/dhcp
@$(call add,LIVE_PACKAGES,cifs-utils elinks lftp openssh wget)
@$(call add,LIVE_PACKAGES,bash-completion gpm screen tmux zsh)
@$(call add,LIVE_PACKAGES,ccache rpm-utils wodim)
@$(call add,DEFAULT_SERVICES_ENABLE,gpm)
regular.mk, p7.mk: server-samba4 flavour The configuration has rather settled down by now although the actual sisyphus/p7 builds still require adding custom repositories (this ought to change for sisyphus but not for p7): http://git.altlinux.org/tasks/138496/ for sisyphus http://git.altlinux.org/tasks/132256/ for p7
2014-09-30 17:36:01 +04:00
distro/regular-server-samba4: distro/regular-server
@$(call add,THE_LISTS,$(call tags,server && (sambaAD || alterator)))
@$(call add,THE_PACKAGES,alterator-fbi alterator-dhcp bind-utils)
@$(call add,DEFAULT_SERVICES_DISABLE,smbd nmbd)
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
endif
Reference in New Issue Copy Permalink