keremet/mkimage-profiles
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ef02d479f7
mkimage-profiles/doc/vm.txt

28 lines
1.6 KiB
Plaintext
Raw Normal View History

README update These have been proofread somewhat to correspond to the current state of affairs; a missing one was added for fonts feature.
2013-06-10 17:37:16 +04:00
== Сборка образов VM ==
added asciidoc support
2012-10-31 01:21:23 +04:00
*ВНИМАНИЕ:* заключительная операция создания образа жёсткого диска
initial build-vm feature Yes, mkimage-profiles is now able to build VM disk images. So far the support is pretty basic: - a single hard drive image with a single partition/FS - only stock root password is configurable - LILO is hardwired as a bootloader The resulting images tend to boot under qemu/kvm though. Please see doc/vm.txt for the warning regarding additional privileges and setup required. This was started back in February but I still hoped to avoid sudo/privileged helper (and libguestfs is almost as undistributable as can be)... Thanks: - http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html - Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen - led@, legion@, vitty@, aen@ for providing advice and inspiration
2012-06-18 22:00:32 +04:00
из архива с содержимым корневой файловой системы требует доступа
к sudo и разрешения на выполнение скрипта bin/tar2vm в корневом
minor documentation facelift A few more items were asking for some attention. In particular, build examples should start with the most basic, error-proof and quick targets.
2012-08-11 23:31:15 +04:00
каталоге метапрофиля при установке mkimage-profiles из пакета
(это в планах исправить, но подход к libguestfs пока успехом
не увенчался).
initial build-vm feature Yes, mkimage-profiles is now able to build VM disk images. So far the support is pretty basic: - a single hard drive image with a single partition/FS - only stock root password is configurable - LILO is hardwired as a bootloader The resulting images tend to boot under qemu/kvm though. Please see doc/vm.txt for the warning regarding additional privileges and setup required. This was started back in February but I still hoped to avoid sudo/privileged helper (and libguestfs is almost as undistributable as can be)... Thanks: - http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html - Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen - led@, legion@, vitty@, aen@ for providing advice and inspiration
2012-06-18 22:00:32 +04:00
Соответствующий фрагмент конфигурации sudo(8) может выглядеть как:
added asciidoc support
2012-10-31 01:21:23 +04:00
mike ALL=NOPASSWD: /usr/share/mkimage-profiles/bin/tar2vm
initial build-vm feature Yes, mkimage-profiles is now able to build VM disk images. So far the support is pretty basic: - a single hard drive image with a single partition/FS - only stock root password is configurable - LILO is hardwired as a bootloader The resulting images tend to boot under qemu/kvm though. Please see doc/vm.txt for the warning regarding additional privileges and setup required. This was started back in February but I still hoped to avoid sudo/privileged helper (and libguestfs is almost as undistributable as can be)... Thanks: - http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html - Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen - led@, legion@, vitty@, aen@ for providing advice and inspiration
2012-06-18 22:00:32 +04:00
minor documentation facelift A few more items were asking for some attention. In particular, build examples should start with the most basic, error-proof and quick targets.
2012-08-11 23:31:15 +04:00
При работе с локальной копией mkimage-profiles.git следует иметь
в виду, что предоставлять недоверенному пользователю право выполнять
от имени root доступный ему по записи скрипт равнозначно предоставлению
полных привилегий root.
initial build-vm feature Yes, mkimage-profiles is now able to build VM disk images. So far the support is pretty basic: - a single hard drive image with a single partition/FS - only stock root password is configurable - LILO is hardwired as a bootloader The resulting images tend to boot under qemu/kvm though. Please see doc/vm.txt for the warning regarding additional privileges and setup required. This was started back in February but I still hoped to avoid sudo/privileged helper (and libguestfs is almost as undistributable as can be)... Thanks: - http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html - Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen - led@, legion@, vitty@, aen@ for providing advice and inspiration
2012-06-18 22:00:32 +04:00
initial specific VM formats support Raw disk images are convenient and universal but there are custom formats like Qemu's qcow2 providing additional features, e.g. copy-on-write or space savings. All of this ultimately belongs to mkimage but in the mean time has been implemented here as well.
2012-06-19 17:51:56 +04:00
Для работы с более специфичными форматами, чем raw ("буквальный"
образ диска), потребуется утилита qemu-img из одноименного пакета;
см. тж. вывод команды make help/vm
initial build-vm feature Yes, mkimage-profiles is now able to build VM disk images. So far the support is pretty basic: - a single hard drive image with a single partition/FS - only stock root password is configurable - LILO is hardwired as a bootloader The resulting images tend to boot under qemu/kvm though. Please see doc/vm.txt for the warning regarding additional privileges and setup required. This was started back in February but I still hoped to avoid sudo/privileged helper (and libguestfs is almost as undistributable as can be)... Thanks: - http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html - Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen - led@, legion@, vitty@, aen@ for providing advice and inspiration
2012-06-18 22:00:32 +04:00
Также потребуется пакет multipath-tools (/sbin/kpartx).
Пример сборки и запуска VM:
added asciidoc support
2012-10-31 01:21:23 +04:00
$ make ROOTPW=reallysecret1 vm/bare.img && kvm -hda ~/out/bare.img
Reference in New Issue Copy Permalink