IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Few things:
- extend feature specification
+ SysVinit can be chosen explicitly via init feature,
no need to keep sysklogd in yet another pkglist;
+ power management should be included too
(both cpufreq setup and power button handling);
+ LILO seems to be heavily preferred among the
target audience :)
- use desktop installer for regular-server
+ the seeming controversy is explained easily:
installer-distro-altlinux-generic has very few
modules to the point of being inconvenient for
anything but quick rounds of basic testing,
and distributions rather do need network setup
along with a non-privileged user.
This bunch of commits was done so these can be
mixed and matched (or even reverted) later if needed;
it was tempting to just revamp things wholesale again
but coarse grained approach is worse to maintain.
This script hook used to lurk in live feature but was deemed needed
in cubox images too; thus it's time to move it into a standalone
feature (maybe a configurable one, even).
Thanks glebfm@ for initial shot and sem@ for discussion.
regular-xfce managed to lack NM somehow (so it even lacked
network after being installed since some build which wasn't
identified right away unfortunately); let's fix that either
during this small refactoring.
Some of those were long asking to be done but cubox project
managed to actually get them done at least to the extent
needed for it; so let's land those and prune things up a bit.
XFCE seems fine on that device while E17 has segfaulted on me so far
(specifically on Cubox and not on e.g. Nexus 7).
In a nutshell, cubox-xfce is an experiment into OEM-like flashware
while cubox-xfce-ru strives to become something more or less ready
for actual use.
lib/*.mk aren't going to be parsed for build targets
in the near future; and the early placement of those
targets was superseded by a dedicated configuration
snippet directory so just move these bits there.
Those based on x86 ones but pruned according to armh repo
presence; most notably, these are missing:
compiz compiz-gtk
java-1.6.0-sun mozilla-plugin-java-1.6.0-sun
libreoffice
remmina
xfcalendar
yagf
It was implemented in a pretty quick-and-dirty way
for regular-mate back then, clean things up a bit.
Package lists should be deduplicated either but
that's another story.
This has had several goals:
- a target suitable for x86 and armh providing a rather
minimal set of base xorg packages and generic drivers;
- task-oriented targets for graphics use cases:
+ "desktop" means rather 2D focus with 3D being welcome
or even essential but not performance critical, thus
"a slower driver is fine as long as it does work";
+ "3d" means specific 3D performance being critical,
that is "no 3D means no use at all".
Regarding the free and proprietary 3D-capable drivers:
the previous idea was to split out some common ground
and then add the contenders on top of that; the current
approach is based on the observation that the live images
requiring proprietary NVIDIA/AMD drivers *by default*
are usually of not much use with hardware that lacks
proper 3D acceleration (like Tseng cards) or the driver
support for that (like Matrox these days).
Intel videodriver makes for a special case though:
it is both free and top-notch performer.
Thanks sem@ and boyarsh@ for discussion.
PS: xorg-drv-{keyboard,mouse,void} dropped;
those who need these can usually help themselves.
These handle only VE-like products (think TWRP on Nexus 7);
the proper image support should be backported later on.
An experiment in layered configurations is still in its
early stages regarding ARM zoo...
The feature officially introduces the "engineering passwords"
including empty ones which have been around since forever but
weren't properly managed (and still are not, at least until
there are no stray passwd/chpasswd/usermod calls in both the
profile, installer-features and all the other related parts).
It is based on an m-p-d init3-users script by stanv@ but was
cleaned up and restructured in a pretty severe manner; thanks
glebfm@ for additional discussion.
This also cleans up the kludge previously stuck into build-vm.
Note that vm/icewm sports graphical autologin now as well as
the default root password (which can be overridden by passing
ROOTPW=... to make but it is a change from the previous state
of affairs indeed).
...and switch to cinnamon-regular metapackage in general:
the remaining blocker being gdm required by that and not
actually going to work (it used to start gnome-shell which
wouldn't work in that configuration either) is now fixed,
thanks cow@.
PS: plymouth is moved upstream, drop the dup.
This one is a part of a larger rewrite to move away from
distro-centric build-up to configuration-centric one with
the particular packaging being of secondary importance
compared to actual functionality.
The installed livecd would lack fstab entries for the filesystems
other than those mounted explicitly during partition step; while
this might be considered either bug or feature, let's try that
and see.
The regular images became a bit too fat and rescueish
with all the good stuff going into rescue+extra pkglist;
that stuff does belong to dedicated rescue images but not
to each and every one.
The base+rescue pkglist has been tailored to take this
into account so we can now make regular-*.iso more fit too.
It might benefit the existing users to be able to configure the
build node persistently across reboots; though the need for something
like NFS overlay or repo settings piggybacked over DHCP is still there
(just ask ildar@).
Thanks to Baurzhan Muftakhidinov's efforts along with help
from cas@ and zerg@, regular images should now support Kazakh
fairly well at least in terms of translation; this commit amends
these images with Ukrainian too and adds an experimental razorqt
based distribution that boots in kk_KZ by default.
There's no NetworkManager or connman in this lightweight image
so let's put at least the lightweight connection specific GUIs
like this one; proposed on the forum by Speccyfighter and
acked by squire as useful for traffic-metered plans:
http://forum.altlinux.org/index.php/topic,28619.msg201159.html#msg201159
A syslogd is required by interactivesystem and we definitely
don't want any extra systemd on a sysvinit image.
Thanks Speccyfighter on the forum for the observation.
A duplicate has formed while factoring out bare target;
as currently only the rescue image uses it in a special way
and that one benefits from additional crypto packages as well,
let's put LUKS related packages into bare for the time being.
The persistent storage is a nice addition to LiveCD images;
it doesn't come for free though in terms of performance
(especially for the first boot), so it should stay optional.
Note that use/live/rw belongs to base and not bare since
otherwise rescue becomes rescue+live which is superfluous;
hence the special use/rescue/rw.
Added sysklogd and udev-rule-generator-net there too; if someone
needs to inherit a systemd based image from distro/.desktop-network
don't break the existing behaviour please.
Rebased tde flavours to .desktop-network as these were the actual
target to fix.
There's some peculiarity causing Sisyphus' initrd
(namely led-ws and make-initrd{,-propagator} of today
to die with this message while booting the resulting ISO:
initrd: Running /scripts/pre/prepare/000-propagator
FATAL ERROR IN INIT: mkdir
I can't recover from this,please reboot manually and send bugreport.
Whoops, and I was mildly wondering where are alterator modules...
thanks Speccyfighter again for bringing attention to the issue
which has turned out to be ultimately caused by an overlooked bit
being missing.
This one was just asking to be built for quite a long time;
http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs
specifically accenting use of smartmontools 6.0 has finally
persuaded me to roll out yet another rescue livecd, that is
on the regular basis.
The metapackage was fine, the "only one" additional package
was more or less okay, but there came a dozen more so it's
now reasonable to stash these into a separate pkglist.
...and refactored its use in cinnamon image too;
this isn't a permanent solution though,
slated to move into fonts feature.
Thanks gns@ for suggestion.
There isn't much sense to keep an entirely separate flavour
as deepsolver starts being actually useful and icewm is
a somewhat special flavour for those who know their ways
around Linux plumbing.
The various *8168 and friends among kernel modules
have finally been pushed into a designated target
so that RM doesn't have to care which particular
additional ethernet modules are available in this
particular branch and kernel.
Tweak distros as appropriate.
NB: *maybe* this is required by distro/.base either.
acpi_call is used far too often when dealing with the newer
portable x86 hardware, we're better off including it when
it's available.
regular.mk adjusted appropriately.
Richard and Theo would probably roll their eyes at this point
but the unfortunate reality is that wireless hardware is very
much dependent on firmware being explicitly provided; so here
it is.
rtl8192 kernel module added since it's present in t6/branch
at least.
This change mostly concerns with making icewm flavour
the lean one again.
The goal is to widen the dynamic range of regular image features:
icewm is not a desktop thus can bear withouth systemd-logind
even if a bunch of network-managing-media-mounting crap has been
rigged to depend on it, and ALT domain client should be included
in most builds for convenient testing in SMB environments but can
stay out of this minimal and "different" image.
It also receives the "un-def" kernel flavour (3.8.0 as of today)
which might benefit from the more available testing facility too.
Its branding is also simplified, plain syslinux menu is fine;
in similar vein, refind feature is flipped from icewm-only to
all-but-icewm set of images with its state being good enough
as of refind 0.6.7 and mkimage 0.2.7.
Added use/live/net-eth so that autoconfigured images
still work in predictable manner.
May those breaking trivial cases walk with zillion of
cdrom, modem, ethernet etc device nodes all around them!
Added fvwm flavour specially for perestoronin from da LOR.
As if it wasn't enough,
- added UEFI support to desktop/,live-desktop intermediate target;
- added live installation capability to desktop/.livecd-install;
- added "net-eth" subfeature to get good ol' eth0 insteal of enp0s3;
- dropped use/x11/autologin as live subprofile sets up
a supported DM for automatic login anyways.
It'd be better for this commit to appear before 0.9.7
(and clobber the original one) but at least the added
functionality has been tested; time to generalize it.
enp0s3 is quite inferior to eth0 in terms of usability
even if it might be more convenient for the machine{,ry}.
Let's stick with what works here in ALT Linux (see #28484).
The same "regular-gtk" based set of images received common
desktop background provided; note that kde4 won't like it
(branding package didn't really anticipate kde4 and is to
be updated appropriately as well as extended for mate/fvwm).
This one is also used for lightdm/gtk.
"regular-gtk" based images moved from the (unsupported) gdm2.20
to the (supported) lightdm with gtk greeter; while a couple of
gdm2 forks have emerged it's still unclear whether mate or mint
one will be actually alive, even short/mid-term.
The issue is that it's suddenly broken in current Sisyphus,
looks like the peculiar set of assumptions in fedora-tweaked
systemd+plymouth+gdm3 relies on tty1 being the X session tty
and it's different here.
It would be great to have #28289 fixed either so that aris@
could approve the image as usable (I totally agree that it's
a major piece of real world functionality currently missing)
looks like there's sense to prepare a starter iso for tests.
- added destination homeros-nano.iso yields minimal
speaking image;
- added "homeros" feature contain scripts appropriate
for general Homeros functions but need further development.
The current refind support implementation doesn't boot
with either USB Flash or CD-ROM for me (due to the different
actual volumes, FAT vs El Torito, accordingly).
And when it does, a host with Secure Boot present and not
disabled yet would turn the unsigned kernel down unlike ELILO
(due to rEFInd using "natural" calls to boot it).
Both issues are reported upstream; in the meanwhile let's
migrate a single test image but build the rest with elilo.
UEFI support is pretty requisite by now;
and el-smp hasn't seen updates for almost
half a year by now so an actively maintained
one is clearly preferred.
See http://www.altlinux.org/Регулярные_сборки_образов
for the idea behind this set of images; in short, it's
*not* a bunch of polished end-user distros in a moment
but rather to facilitate Sisyphus package base testing
in as-is state during branch pre-release time.
The whole live-rescue needs a massive facelift regarding
applications included and user experience achieved (remember
that folks are going to be stressed enough already with data
lost or system(s) not booting, and probably offline as well);
but at least it's UEFI bootable now.
Intermediate one: build-propagator *is* run off stage1,
no mkimage changes for that matter so far. This means
that m-p still duplicates mki-pack-boot to some extent
but the way to dedup this is still not clear enough...
While ildar@ has some reason for the slimmer image
the somewhat standalone one is documented in examples
for offline use, ruining it in-place is not an option.
Let's just do a split (and lose a target-specific variable
example in favour of a commodity pkglist by the way; oh well).
a live-builder appliance is (or may be) usually used for building software
with many dependencies, hence needing access to external resources,
e.g. apt repos with lib${NAME}-devel packages.
This commit cuts RPM packages from the live-builder LiveCD.
Both do require postprocessing (see http://www.altlinux.org/UEFI)
until mkimage receives xorriso support and efiboot.img is passed
down there somehow, but it's beta than nothin' so far.
Introduced distro/.live-desktop-ru as a shortcut for
distro/.live-desktop use/live/ru which occurs several times
already (and the counter will increase right now).
Thanks go to ildar@ for spotting this: my ~/.mkimage/profiles.mk
routinely contains DEBUG = 1 line which effectively masked this
regression in commit 307fb51f15.
Wouldn't be a big deal but syslinux.iso is recommended in
tutorial docs being slim and fast-building, and it's also
what's buildable locally in live-builder.iso environment.
The rationale for the former is that the image gets slightly
more compact (although the current sisyphus build is way larger
than the t6/branch build of the optimization time, need to look
into that...); and for the latter it's to provide yet another
installer with a different enough kernel so that there's one more
chance in a weird situation.
Thanks Serg Markov for bringing my attention to this:
http://www.opennet.ru/openforum/vsluhforumID3/86552.html#61
While the official distros might skip some filesystems for
support reasons there's no reason for community distros to
do so either.
Let's try that with icewm.iso...
NB: installer has a misfeature of dropping jfs/reiserfs
support in runtime unless "expertmode" magic word
is on the kernel bootargs string (#27763, #17368).
Its immediate purpose was influencing the GRUB boot menu
*but* the implemented mechanism is actually a part of the
long planned text branding and might be further merged
into branding when hierarchical features finally chime in.
So let's get the naming straight before it breeds.
See http://www.opennet.ru/openforum/vsluhforumID3/86239.html#1
for a query that has led to this one; in particular,
- xdm dropped (won't log in root and there are no users yet);
- network is brought up and configured via DHCP by default;
- apt-get works out-of-box;
- default image size is twice the chroot size.
