IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Every .iso was assumed to be bootable since the very beginning[*],
and isoboot images were deemed to be x86 isolinux ones; this didn't
change with basic ppc/armh support as I never ran into hardware
that would _boot_ those ISOs, not only run the code, and it was
only e2k isodata project that finally forced this refactoring.
It's still not perfect: pack and syslinux features still end up
somewhat interwoven, and too much places care for architecture
the image is being built for (instead of archdep features tossing
their appropriate bits and pieces in).
Should help:
- any-arch regarding isodata images;
- {x86,aarch64}/efi by decoupling isoboot and isolinux;
- ppc{,64} as introducing yaboot support will be easier now;
- mipsel{,64} too, hopefully.
* I knew of school addon images baked with mkimage-profiles-desktop
but postponed and then neglected the whole problem for years...
Yes these bits are related to distro/ prefixed images
still the overgeneralization in distro.mk didn't pay off
but rather hid a bug with the only boot/isolinux in use
having no dependency on use/syslinux (which is required).
Maybe this will get revisited when we have other kinds
of bootable images with other bootloaders (vm/ ones care
for themselves as of today).
This subprofile is akin to THE_* variables family: the configuration
bits and script hooks sitting there influence whatever chroot is
declared to be the user facing one in the end, whether it comes
from vm image or live subprofile.
The services feature ought to be a changeset of its own which would
be based on rootfs and become the base for ve/vm changes but I chose
to just do it atomically; some pre-existing duplicates are pruned now.
This one is a part of a larger rewrite to move away from
distro-centric build-up to configuration-centric one with
the particular packaging being of secondary importance
compared to actual functionality.
This is thanks to the fact that alterator-based install2 needs
alterator-browser-qt which needs X11 which needs working device drivers
-- and at least AMD C60 APU would only yield a nice dotted white screen
without that firmware.
Roughly the same for X11 bearing LiveCD images.
Just like livecd-install, graphical installer KMS support
looks better as an optional part of install2 feature.
Of course it's optional only if the release manager is fine
with VESA drivers and not KMS-requiring intel/radeon/nouveau;
thanks led@ for a confirmation just in case.
This further refines the modular build by making
metadata being a clearly separated feature rather
than having to rely on runtime tests, and also by
moving the code which cares for kernel bits of base
installation (.base list) in a feature of its own.
There's more to it but let's get the ball rolling first.
Initial SPICE support has been added for kvm/libvirt installation
and boot-up using qxl and spice by default as proposed by shaba@.
VirtualBox part is shifted a level deeper correspondingly
but otherwise stays the same.
As was noted by Alexey Shabalin in libosinfo context,
current ALT Linux images tend to lack ISO9660 metadata
-- which they did have back in the day of Master 2.4.
Please note that the data collection occurs this way
due to mkimage's config.mk resetting the values to be
empty; this was worked around by using another config
file, $(BUILDDIR)lib/iso.mk, and including it later
but that would require a separate target with per-target
CONFIG variable which isn't elegant at all given the need
to actually build up the metadata set.
So the variables were changed (to be more readable anyways)
and then proxied back to BOOT_*. This might be cleaned up
some day after the inclusion order is tweaked or mkimage
defaults get set-if-unset-yet (?=).
As noted in doc/assumptions.txt, the SHELL based target tracing
only works for rules with recipes, even empty but present ones.
The simplest thing to do is hooking "; @:" onto the rule's tail
(one-liner with a non-printing shell builting "true" command).
As was duly noted by Leo-sp50, both server.mk and desktop.mk
duplicate a few bits layered over bare distro/installer which
happened to be both a dependency (thus should reduce redundancy)
and a "real distro" target (well, it doesn't just work yet, need
to provide networking and sources.list in install2 by hand).
Fixed by moving a "node" to distro/.installer along with typical
additions and leaving a bare installer as is by now; there's a
need to get it working at least for DHCP/ftp.altlinux.org case.
distro/.base target used to pull in localboot syslinux config
snippet which might be too early for some of the further distros;
it's a quite fragile equilibrium which was shifted a bit by imz@
(see #26606). Feel free to reopen the discussion though, things
might be tweaked so that localboot might be desirable on almost
every image even if with lower priority...
This was asked for by Leo-sp50 and torabora, and seems quite reasonable:
let's provide means to keep at least some distribution configurations
a bit apart, so that these can be considered more standalone in terms
of hard warranted functionality but at the same time enjoying the common
infrastructure.
Considering lib/distro.mk: it's now experimentally pulled apart so that
parallel development of different distro families can go on without
major merge hassles. *Please* don't abuse with massive copy-paste.
And before you ask: this might get extended to allow for "private"
out-of-tree configurations being included since apparently there
are goals with no meaning outside of some very particular context...
but otherwise I'd like to encourage getting reusable bits in-tree.
This is quite a large-scale change since mkimage-profiles got used to
baking distributions over the last year, and virtual environments are
quite different, so e.g. image.in/Makefile had to be split in two with
the main part of it moved into features.in/iso/lib/.
Short overview:
- features.in/Makefile: lib/ support
(supporting VE images requires dynamic modifications
to image.in/Makefile before starting the build;
the most natural way to achieve that seems to use
features mechanism along with makefile include dir)
- packaging format related part moved into features.in/pack
(should be better prepared for diversity either)
- features.in/iso renamed to features.in/build-distro
- features.in/ve renamed to features.in/build-ve
+ NB: these could not be merged as e.g. features.in/build
due to completely different script hooks
- lib/image.mk renamed to lib/build.mk
- image, config, log postprocessing moved downstream
- added a sort of a topping in the form of lib/sugar.mk
- assorted style fixups (like ifeq usage)
- clean.mk: reliability fix (the problem was observed by Oleg Ivanov
and me too but finally it did get the attention quantum)
- reviewed, updated and extended docs
+ QUICKSTART: should be[come] a step-by-step guide
(thanks Leo-sp50 for prodiving feedback)
