IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The initial approach required some quite involved postprocessing
as described in http://www.altlinux.org/UEFI#HOWTO; after having
ironed out the kinks so that initial EFI support could be merged
into mkimage proper we're better off just using it, eh?
The issue actually hit image.in/Makefile: "metadata" target
in features.in/metadata/lib/50-metadata.mk wasn't reached
even if features.in/build-distro/lib/90-build-distro.mk
would ACK that the "whatever" actions included "metadata";
thus Metadata/pkg-groups.tar wasn't created and the installer
silently failed to install the .base system.
Let's armour the rest of the cases where the order of inclusion
might be important as well.
Another feature suggested by Michael Radyuk (torabora):
some images are known alpha/beta quality, it's more handy
to just state this at the build time than to rename by hand.
mkimage and hasher can make use of qemu to run
non-native binaries while working on the chroots;
thanks kas@, manowar@ and sbolshakov@ for implementing
this functionality as well as providing nice examples
through mkimage-profiles-arm and mkimage-profile-armrootfs.
This required the architecture check to be added since baking
a tarball with "arm" as its specified arch and x86_64 inside
isn't particularly good thing to let slip through; however
the implementation is quite fragile, bugreports and patches
are seriously welcome.
NB: APTCONF evaluation order between lazy make and nimble shell
turned out to be quite a delicate issue in this particular case.
Following m-p-d, a more involved default output directory
structure is feasible now:
~/out/name/date/name-date-arch.type
instead of plain
~/out/name-date-arch.type
This particular behaviour can be achieved by passing
SORTDIR='$(IMAGE_NAME)/$(DATE)'; note the single quotes.
Reports are also saved in this resulting structure
albeit the place is still highly debatable.
From now on, non-empty SAVE_PROFILE variable will indicate
the need to carry the particular generated profile inside
the image built from it.
Thanks gns@ for this feature in liveflash.eeepc.
It was briefly mentioned in QUICKSTART but somehow managed
to evade the commandlines provided. And while at it, let's
make errors like this more explicit to avoid extra lookups.
Oh, and fix QUICKSTART so that readers miss the hassle. :)
Thanks Vladimir Karpinsky for pointing this problem out.
The former toplevel Makefile is now toplevel main.mk;
this change allows for multi-target, multi-arch processing
in the current toplevel Makefile.
As the "build" symlink semantics change quite considerably
when one is doing bulk builds (several pruned builddirs might
be useful for comparison), BUILDDIR is now much more likely
to be recreated: the cases when it will persist are when it's
either a single-image build or when the prefix hasn't changed.
There are some more or less subtle bugfixes and enhancements
all over the map as well.
Done within 20111230..20120102 timeframe, actually...
Here we go with postprocessing priorities along the way
as ISO hybridization has to occur before implanting
final MD5 sum (which must happen earlier than e.g. some
external MD5SUM file generation).
Unfortunately proper dependencies aren't applicable here
(though I'd like to be proved wrong on this one).
Please note that this needs propagator > 20101130-alt9
for automatic mode to work (has also been worked around
in gfxboot case with design-bootloader-source-6.0-alt1).
Thanks rom_as@ for asking about the hybrid image status
and helping out with testing.
This is a base for "media check" to become available:
using this feature will implant a checksum into the image
so that it can be verified during install.
Also added a test/demo distro/live-isomd5sum target.
For real distros an alterator module is probably due.
There's a recommended version (0.2.0+ currently) and also
the minimal version, 0.1.7, which received the important fixes.
It was proposed by nice antique@ folks IIRC.
Unfortunately the "suboptimal version" warning is pretty modest,
and "minimal version" error will be apparent with DEBUG enabled;
still the latter will terminate the downstream build and leave
a clear message in build.log at any rate.
The bigger goal was being able to set up build in a way
that would allow for images (with configs and logs) be
deposited in per-IMAGE_NAME subdirectories of IMAGEDIR;
that's not done yet but a part of it is ready.
NB: in BUILDDIR, symlinking the just-built image is now
replaced with symlinking the IMAGEDIR since its location
is then predictable thus .gitignore-able for further work
on a generated profile, and more documentable as well.
It's not a hard change though, if you miss the image link
just drop me a note (or a commit).
Essentially some more polishing:
- image path extracted from downstream build log;
- extended error/warning regexp a bit so those with
color grep options get even prettier output.
Notes:
- "1024" a magic number (briefly explained when introduced)
moved to a sort of variable;
- "100 lines" for tail(1) is a rule-of-thumb taking into account
typical amount of hasher/mkimage exhaust given GLOBAL_VERBOSE.
If you make distro/live-builder.iso, the result is an image
containing almost everything (short of actual full enough
repository) to rebuild itself. It will attempt to configure
eth0 with DHCP and reach http://ftp.altlinux.org for packages.
RAM requirements start with 2Gb, self-build is accomplished
on a 4Gb host with "make CLEAN=1 distro/live-builder.iso".
Packages required for "make distro/syslinux.iso" get included.
(some due fixups all over the place too)
This is quite a large-scale change since mkimage-profiles got used to
baking distributions over the last year, and virtual environments are
quite different, so e.g. image.in/Makefile had to be split in two with
the main part of it moved into features.in/iso/lib/.
Short overview:
- features.in/Makefile: lib/ support
(supporting VE images requires dynamic modifications
to image.in/Makefile before starting the build;
the most natural way to achieve that seems to use
features mechanism along with makefile include dir)
- packaging format related part moved into features.in/pack
(should be better prepared for diversity either)
- features.in/iso renamed to features.in/build-distro
- features.in/ve renamed to features.in/build-ve
+ NB: these could not be merged as e.g. features.in/build
due to completely different script hooks
- lib/image.mk renamed to lib/build.mk
- image, config, log postprocessing moved downstream
- added a sort of a topping in the form of lib/sugar.mk
- assorted style fixups (like ifeq usage)
- clean.mk: reliability fix (the problem was observed by Oleg Ivanov
and me too but finally it did get the attention quantum)
- reviewed, updated and extended docs
+ QUICKSTART: should be[come] a step-by-step guide
(thanks Leo-sp50 for prodiving feedback)
install2 cleanups:
- functionally indifferent ones: particularly, install2/*/98system's
"mkdir -p /image" was superfluous as it was done by that time already
by sub.in/stage2/image-scripts.d/00stage1
- taken apart, prepared for tags: so far it's a mostly moot change
since the installer cleanup scripts themselves are mostly the same as
preceding 90cleanup was (with some additions corresponding to recent
kernel development); it's still unclear what the mechanism for
configuring the cleanups in effect will be, either directory/package
regex lists or tagged scripts excluded from execution by yet another tag
fixes:
- image.in/Makefile: fix metadata related test; the actual test was
assuming that stage1 kernel means installer, which is not the case
since generic stage2 introduction; oh well
- 85cleanup-lowmem: a "_" too much was the culprit in destroying the
needed translations along with those deemed superfluous; thanks go to
Oleg Ivanov and Lenar Shakirov for finding the bug and proposing the
fix altogether
additions:
- features.in/Makefile: reworked help target; it was rather inaccessible
due to BUILDDIR normally undefined at the time of direct make
invocation, and BUILDDIR is normally defined during normal builds
anyways so let's try it this way.
- README++
daydreams:
- 01-genbasedir: we should drop bzip2 compressed pkglists some day
but see genbasedir and apt-cdrom first, 90-pkg.sh (alterator-pkg)
will fail miserably otherwise
It was clear that "common" isn't very apt for packages that
will get *everywhere*, and became apparent when the need for
a "base+live packages" variable arrived with powerbutton feature.
So:
- the former COMMON_PACKAGES are now SYSTEM_PACKAGES;
- COMMON_PACKAGES act as "BASE+LIVE_PACKAGES".
Note that SYSTEM_PACKAGES also got factored out from stage2 based
features into stage2 subprofile itself; cleanups were due as well.
MAIN_GROUPS should align better along with MAIN_PACKAGES
and MAIN_LISTS (even if MAIN_ prefix might be suboptimal
given that these packages are essentially extras within
the particular image).
- introduced generic stage2 subprofile (non-standalone)
- ported installer and rescue over to stage2/{install2,rescue}
- initial stage2/live (needs more work for sure)
- use make-initrd-propagator
- updated and somewhat extended doc/
NB: mind #26133, #26134
s,INSTALLER_KFLAVOUR,STAGE1_KFLAVOUR,g
s,INSTALLER_KMODULES,STAGE1_KMODULES,g
install2 isn't the only livecd around;
so far all of these share the same kernel
in m-p-d, and we'd rather need two+ kernels
with dual-arch media or so; let's not complicate
things too much at this point
In particular:
- .base is now generated from pieces (see image.in/Makefile)
- s/DISTROS/IMAGES/g; s/CONFIGS/DISTROS/g (for clarity)
- s/DISK_LISTS/MAIN_LISTS/g ("disk" was early m-p-d legacy)
- introduced BASE_PACKAGES to complement BASE_LISTS
- minor tweaks to Makefile (ARCH and DATE moved elsewhere)
- libdistro.mk: dropped overlooked IMAGE_INIT_LIST copy
- clean.mk: silly cleanup
This looks a bit weird (two subprofiles become a bit more
tightly coupled) but in fact install2 does depend on stage1,
and if stage1 doesn't create squashcfg.mk then install2 is
just fine with defaults (provided they fit the installer kernel
used). A proper mkimage test infrastructure might be handy though.
Also there:
- 01-initfs: partial cleanup (bootsplash is obsolete anyways)
- regarding 03-test-kernel's errorlevel test:
if 0, 1 and 2 need to be distinguished, "!" MUST NOT be used
as it negates so that 0 becomes 1 and the rest becomes 0
- image.in/functions.mk: rework kpackage()
+ it takes two arguments explicitly now: this adds some noise
for "generic" invocations but is rather less messy with recently
introduced STAGE1_KFLAVOUR (which in its turn is rather cleaner
than messing with KFLAVOURS, especially since soemthing changed
in presumably apt and we can't rely on kernel packages being
installed in the order formed).
- BUILDDIR/DEBUG related fixes
+ Makefile: BUILDDIR initialization moved to distro.mk
- build.log += git info
Renamed server-light.iso into server-ovz.iso to avoid brand dilution
and confusion (rider@'s server-light rather favours kvm, anyways).
Introduced KDEFAULT: a reliable default kernel chooser knob
since apt's regex ordering proved pretty unreliable.
Spelling things explicitly is better anyways.
SYSLINUX related features undergone pretty major rewrite
(that includes syslinux, hdt and memtest).
The problem to tackle was features.in/syslinux/generate.mk
assuming syslinux and pciids available in build *host* system;
this well might not be the case (or worse yet, those can be
just different). So now we're a bit less elegant and a bit
more enterprise, stuffing things into chroot and working there.
Bunch of other fixes along the road, including ; to name a few:
- fixed memtest entry (overlooked while renaming SYSLINUX_ITEMS)
- new and shiny doc/CodingStyle
- gfxboot, stage1 target chain, hdt tweaks
- distro.mk rehashed
- README++
- TODO: dropped (integer overflow anyways)
+ actually moved off-tree to reduce commit spam
- s,\.config\.mk,distcfg.mk,g
- doc/profiles.mk.sample: sample ~/.mkimage/profiles.mk
- ...and assorted fixups/additions
Sorry for convoluted commit, this would have been pretty hard to
rework into some really readable shape (and you might be interested
in the original repo's history horrors then, anyways).
Now we don't dump all the gory details onto thee
but rather log them handsomely and present only
the most important details by default; use DEBUG=1
and/or BUILDLOG=/path/to/file to tweak.
Also introduced IMAGEDIR and IMAGENAME.
The rest:
- ovz-smp is no more
- base-l10n pkglist (suggested by Alexander Kuprin)
- clean.mk:
+ fixed an oversight: the test result erroneously applied
only to the first command of several ones that should be
run iff build/ is a symlink
+ drop implicit rules (it's no C code)
- Makefile: more reasonable iso names
- image.in/Makefile: .disk/date too
- drop hardwired kernel flavour from pkglists
- today's std-ng lacks aufs, let's switch to un-def
- second assault at KERNEL_PACKAGES_REGEXP
- re-introduced kpackages (builds ok)
PS: base lists: switch to grub, add udev, cleanup
A major change in approach largely thanks to discussions
with Alexey Cheusov but also well aligned with my own findings:
autoconf doesn't let the variables to form an inheritance.
And data flow described at http://www.altlinux.org/WhiteLabel
(which in its turn was born thanks to Gavin Henrick of Diva Telecom
and to Alexander Bokovoy of SaM-Solutions) is really dependent on
the existence of such an inheritance.
Also:
- distro.mk += try()
- "hide" special targets
- fixed wrt distro/.{base,init,metaconf}, thx gns@
- README updates
+ added metaconf.mk
+ clarifications
- updated pci.ids location for hdt
