IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
While this argument can only have one "EFI" value.
Thus, the problem of building an image for Raspberry Pi on armh,
where there is no grub-efi, was solved.
recovery.tar needed for tavolga (mipsel).
This commit is the result of transferring the required functionality
from build-mr (mipsel rootfs).
This change uses external tool to build Tavolga-compatible
recovery.tar. This simplifies the logic and avoids having
recovery workdir in the profile.
After this change, m-p will require tavolga-image-tools >= 3.0.
build-vm ceases to be a target for building only virtual machine images.
Now it can be used to build tarballs designed for installation on real
machines.
This commit is the result of transferring the required functionality from
build-mr (mipsel rootfs) by Ivan Melnikov <iv@altlinux.org>.
NB: mike@ strongly objected to this dilution but gave up eventually;
the whole kernel/build-vm/tar2fs/pack mess should be split into
distinct layers busy with their own responsibilities:
1) a tarball with kernel is done without tar2fs at all
(and no build-vm bits should be needed either, maybe
it's worth splitting and renaming as "vm" meaning
disk image for some armh board is grossly misleading);
2) a tarball with kernel can be further (multi-)packed
as, well, (compressed) tarball and a disk image
(only the latter one should employ build-vm/tar2fs);
3) compression should be done in pack feature style,
preferably described once and not duplicated all over
the profile for every single new kind of its output.
In the mean time, running into this and moving no further
starts to hurt more than it could help.
The original commit broke system tar2fs use by accidentally
moving TOPDIR definition into a separate shell execution;
thanks iv@ for spotting and fixing it promptly.
Co-authored-by: Ivan A. Melnikov" <iv@altlinux.org>
tar2fs comes from m-p, not from mkimage. Also, we should
use $TOPDIR from shell, not $(TOPDIR) from make, when
calling it.
Note: this is a security fix for environments relying
on packaged mkimage-profiles with sudo enabled for the
builder user.
Fixes: f293239d5b
BASE_PACKAGES_REGEXP and THE_PACKAGES_REGEXP,
to be exact; the lack of handling these appears
to have been the culprit of firefox missing in
vm images which use/browser/firefox.
In this case it's rather worth it to examine build.log
than read documentation again (as vm.txt should have been
read or at least skimmed through to get sudo setup ready,
and the problem might be either an environment one or a bug).
It's at least removing the very obvious user->root
attack through (maliciously) modifying bin/tar2fs
and waiting for it to be run; if mkimage-profiles
is installed system-wide as a package, the script
from /usr/share/mkimage-profiles will be tried so
those willing to allow vm/* build to themselves
can provide for a passwordless sudo (as described
in doc/vm.txt) to run a root-only writable script,
not user-writable.
Still not perfect but a step away from the abyss.
Overview of the changes:
- ARM support: separate ext2 /boot, no LILO
- avoid race condition with devmapper
- trap ERR so that -e in shebang doesn't result in extra cleanup hassle
- configurable root filesystem type (ext4 by default)
- jumps through parted hoops
Details:
1. LILO is x86-specific while the rest of the script can be used
to prepare e.g. Marvell ArmadaXP or CuBox images; we can generally
count on uboot supporting ext2 for relatively sane platforms but
not ext4 that would be a better root filesystem performance-wise.
2. Apparently /dev/mapper/loopXpY can be still missing at the time
when kpartx returns and pop up a bit later... sit there, wait
and check for it.
3. If something went wrong with any command of the script it would bail out
due to -e in shebang; it is now better to clean up the loopback device
and its mappings in this situation either.
4. One size doesn't fit all, really.
5. The parted sizing was sloppy as in broken, now it's just half insane.
Someone's decision to stick units and auto-alignment knobs into
a single one was apparently hilarious...
http://www.gnu.org/software/parted/manual/parted.html#unit
Manual loop/dm cleanup is described in documentation just in case.
/boot size meter is suboptimal in terms of additional I/O incurred,
will be most likely rewritten to make use of advance "du -s".
The feature officially introduces the "engineering passwords"
including empty ones which have been around since forever but
weren't properly managed (and still are not, at least until
there are no stray passwd/chpasswd/usermod calls in both the
profile, installer-features and all the other related parts).
It is based on an m-p-d init3-users script by stanv@ but was
cleaned up and restructured in a pretty severe manner; thanks
glebfm@ for additional discussion.
This also cleans up the kludge previously stuck into build-vm.
Note that vm/icewm sports graphical autologin now as well as
the default root password (which can be overridden by passing
ROOTPW=... to make but it is a change from the previous state
of affairs indeed).
Classic VEs don't carry any kernel since these are running
under a single OpenVZ (or potentially LXC) kernel image;
ARM Multiboot (TWRP in this particular case) allows to boot
off a chroot via kexec, and we need a kernel in it for that,
obviously.
No bootloader required inside such VE though.
mkimage implementation requires that the variables
to be passed to the scripts are to be prefixed with
GLOBAL_ or INFO_ tags as appropriate; in this case
the upstream makefile didn't care to.
It's better to rather just move the raw image instead
of specifically converting it into the same, and there's
no need for qemu-img altogether then.
Let's drop the intermediate raw image after successful
conversion as well.
A virtual machine isn't very useful if there are no means
to access it; let's bring up the basic networking and provide
root SSH access via pre-existing public key.
As the remote access with known default credentials is roughly
equivalent to just lending one's VMs to anyone with network
access to it, the fallback root password is now exterminated;
you have to provide one (or a long enough random string
if you plan to use keys only, see e.g. apg utility).
Raw disk images are convenient and universal
but there are custom formats like Qemu's qcow2
providing additional features, e.g. copy-on-write
or space savings. All of this ultimately belongs
to mkimage but in the mean time has been implemented
here as well.
Yes, mkimage-profiles is now able to build VM disk images.
So far the support is pretty basic:
- a single hard drive image with a single partition/FS
- only stock root password is configurable
- LILO is hardwired as a bootloader
The resulting images tend to boot under qemu/kvm though.
Please see doc/vm.txt for the warning regarding additional
privileges and setup required. This was started back in
February but I still hoped to avoid sudo/privileged helper
(and libguestfs is almost as undistributable as can be)...
Thanks:
- http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html
- Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen
- led@, legion@, vitty@, aen@ for providing advice and inspiration
