IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Why would anyone try to remove apt when it's needed
for package dependency tracking for the installation,
it only takes a less cursory look at the build.log
to figure out it didn't actually happen anyways...
An initial draft of it was done half a year ago but several tricky
thingies had kept the code from showing up as it was rather brittle
and incomplete.
This implementation involves quite a few changes all over the place
but finally works good enough for live and installer images.
Please pay attention to the versions of these packages:
- installer-feature-setup-plymouth (0.3.2-alt1+)
- branding-altlinux-sisyphus (20110706-alt2+ if used)
- plymouth (0.8.3-alt20.git20110406+)
See also:
- http://www.altlinux.org/Branding
- http://www.altlinux.org/Plymouth
Just like livecd-install, graphical installer KMS support
looks better as an optional part of install2 feature.
Of course it's optional only if the release manager is fine
with VESA drivers and not KMS-requiring intel/radeon/nouveau;
thanks led@ for a confirmation just in case.
After having added metadata dependency livecd-install
started to look more like a feature than like an intermediate
distribution target; so things were shuffled a bit that way.
This further refines the modular build by making
metadata being a clearly separated feature rather
than having to rely on runtime tests, and also by
moving the code which cares for kernel bits of base
installation (.base list) in a feature of its own.
There's more to it but let's get the ball rolling first.
The initial work covered live images but missed an installer bit
(thus notes and slideshow were missing in install2) while forgetting
to put branding packages into base list (thus kindly making these
available for *manual* installation sometime after, ouch).
NB: for the feature to work properly the chosen branding
package set should have proper Provides: and Conflicts:,
specifically it must explicitly conflict with the most
lexicographically cool package set around (these days
it's sisyphus-server-light).
As duly noted by glebfm@, branding issues need more attention
by now since only stage1/install2 got some of it so far in this
regard. Hence the dedicated feature comes to the rescue
(well no, it doesn't actually mess with rescue!).
use/slinux-live: in p6 slinux had install-dvd version too
lists/slinux/misc-dvd: user 3d-proprietary comes from use/x11/3d-proprietary
lists/slinux/misc-dvd:restore compiz
slinux: use/syslinux/localboot.cfg
This script specifies the (excessive) lists of services
to be enabled and disabled explicitly; these are mostly based
on profiles/live/image-scripts.d/init3-services from m-p-d.
There might be systemd related pecularities though...
There's no real reason to keep bcmwl and ndiswrapper
around exclusively as the currently available support
vastly takes over the early attempts at the task.
(it's not about bare firmware though, and some day
something like use/hardware/wireless should get in)
Initial SPICE support has been added for kvm/libvirt installation
and boot-up using qxl and spice by default as proposed by shaba@.
VirtualBox part is shifted a level deeper correspondingly
but otherwise stays the same.
It is actually an effort by glebfm@ to create an experimental
systemd-based Simply Linux LiveCD; I merely reviewed the original
diff, moved kernel related bits to firmware (see preceding commits)
and introduced a dedicated pkglist namespace by creating a directory.
THE_PACKAGES_REGEXP is in place, let's rebase firmware packages
so these would be available in LiveCDs either.
The news for systems being installed is that MAIN_* is optional
while THE_* is included in base system; firmware packages tend
to be pretty tiny and harmless.
kernel-wifi pkglist has absolutely no sense by now, hence purged;
firmware-rt* and firmware-i2400m are merged into firmware-linux.
There were STAGE1_PACKAGES_REGEXP and MAIN_PACKAGES_REGEXP
but adding more of those was postponed to avoid bloat and
bitrot; THE_PACKAGES_REGEXP is needed for use/firmware now
and looks like BASE_PACKAGES_REGEXP and LIVE_PACKAGES_REGEXP
will be useful before too long either.
Docs updated to include stage-specific package related vatiables.
Looks like the 128k default block size is pretty well chosen:
it saves ~6% of image size compared to 64k, and subsequent
differences are ~3% per doubling the block size up to 1M
(thanks led@ for carrying out the tests).
So we'll stick with 256k for "normal" xz compression (inodes
uncompressed) and get 512k back for "tight" one (compressed).
The runtime performance issues are to be examined yet when
bootchart or the like is deployed, nothing drastic though.
With "fast" (gzip/lzo) squash compression inodes go unmolested.
For the record, tight live-webkiosk builds as 95M image in 3:40,
and tight live-flightgear.iso builds as 669M image in 6:34. Nice.
There's no much sense going for 1M block size: e.g. live-webkiosk
would drop to 93M (3:46) but its load time would increase up to
2:07 as compared to 1:48 for -b 524288 and 1:42 for -b 262144 -noI
on a Duron 500/512M system given the very same DVD+RW media.
The existing implementation would handle kernel differences
just fine but a bit too automatically: if it sees xz support,
that's what will end up being used (and if there's -Xbcj binary
compression filter available for the target platform, it will
be applied unequivocally either).
It's perfectly suitabe for getting fine-tuned release images
but is also a bit too resource-consuming while developing the
image configuration which has no business with its compression.
The one and only knob is SQUASHFS (see doc/variables.txt);
to give an idea of the differences, here are some numbers
for a mostly-binary (43% as per 99-elf-stats) webkiosk livecd
and a rather less so (18%) flightgear one on a dual quad-core
X5570 node (each mksquashfs run used up all the cores):
SQUASHFS | live-webkiosk.iso | live-flightgear.iso
---------+-------------------+---------------------
fast | 3:30 / 130M | 5:11 / 852M
normal * | 3:37 / 100M | 5:35 / 688M
tight | 3:50 / 98M | 6:47 / 683M
Thus if the knob isn't fiddled with, the defaults will allow
for a reasonably fast build of a pretty slim image; if one is
building a release or if a particular image is very sensitive
being close to the media capacity then just add SQUASHFS=tight
and see it a percent or two down on size.
Please note that lzo/gzip-compressed images are also quicker
to uncompress thus further helping with test iterations.
Thanks to led@ and glebfm@ for helpful hints and questions.
APM enabled notebooks would usually hibernate to
a partition of special type and special format;
thus to make use of this APM BIOS feature folks
might need a corresponding formatter.
Thanks snejok@ for spotting the missing, I didn't get around
to tests with headphones...
Also fixed nouveau getting in after target shuffling,
and tweaked firefox homepage to be useful in this context.
- incompatible change (to fix the rather broken early style):
use/syslinux/ui-% is now use/syslinux/ui/%;
- default timeout changed to 9 seconds (long enough and keeps
the countdown in a single figure);
- added totaltimeout of 300 seconds;
- provided live kiosk images with almost-instant boot by default;
...and some other assorted tweaks here and there, sorry.
Thanks to a reviewer who came with useful feedback and a goal:
http://www.opennet.ru/openforum/vsluhforumID3/83728.html#136
the live-webkiosk image got forked into a separate one:
- dropped DRI, virtualbox GA, mc & co, docs, rpmdb;
- added Russian keyboard layout (ctrl+shift to toggle);
- rebased live-webkiosk onto live-webkiosk-mini ;-)
Maybe vbox guest additions will get back but rpmdb is a bit
impractical on a kiosk squashfs image, even in presence of
aufs rw overlay.
Now is the time for all fonts to be pulled in when needed and not
along with the X server and hardware drivers; tablet support is
moved to a (preexisting) specific target either.
There's no need now to arch-discriminate a few older drivers too.
There's much reason for reuse instead of duplication
among the different stage2-based subprofiles.
In particular, the rather monolithic driver cleanup script
of the ancient is better done in several clear pieces with
the final depmod run.
Scripts dropping apt/rpm databases will dump pkglist first.
A script purging /boot/* will honour live-install if present.
Minor inno^Wfixups all over the map too.
The previous configuration would result in intel-only
3D being available since nouveau and radeon kernel modules
are packaged separately with most kernel-images; getting
NVIDIA/AMD drivers in is more tricky due to availability
of both proprietary and free implementations with the choice
being rather a tradeoff in each case (somewhat less so with
ATI/AMD drivers).
So this is a first shot at the problem: FlightGear would
freeze on me with today's nouveau.
As was noted by Alexey Shabalin in libosinfo context,
current ALT Linux images tend to lack ISO9660 metadata
-- which they did have back in the day of Master 2.4.
Please note that the data collection occurs this way
due to mkimage's config.mk resetting the values to be
empty; this was worked around by using another config
file, $(BUILDDIR)lib/iso.mk, and including it later
but that would require a separate target with per-target
CONFIG variable which isn't elegant at all given the need
to actually build up the metadata set.
So the variables were changed (to be more readable anyways)
and then proxied back to BOOT_*. This might be cleaned up
some day after the inclusion order is tweaked or mkimage
defaults get set-if-unset-yet (?=).
As noted in doc/assumptions.txt, the SHELL based target tracing
only works for rules with recipes, even empty but present ones.
The simplest thing to do is hooking "; @:" onto the rule's tail
(one-liner with a non-printing shell builting "true" command).
It looks like the intermediate targets aren't all equal:
some define a finished feature while some create a common
lower level piece of configuration.
Let's do shortcuts for the former so that a distro line can be
more terse and descriptive; help targets in features.in/ tweaked
accordingly.
