IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This change is done to reduce ambiguity in some cases;
the previous intention has been to ease navigation when
staying in a particular directory, now it's been changed
in favour of convenient toplevel `git grep' in fact.
Both variants have their pros and cons, I just find myself
leaning to this one by now hence the commit. Feel free to
provide constructive criticism :)
Some path-related bitrot has also been fixed while at that.
The behaviour that sort of settled didn't actually follow
the principle of the least surprise when one really wanted
to have BUILDDIR available for inspection; DEBUG=2 would be
effective to achieve that but CLEAN=0 would not.
Thanks led@ for spotting and reporting this.
lib/*.mk aren't going to be parsed for build targets
in the near future; and the early placement of those
targets was superseded by a dedicated configuration
snippet directory so just move these bits there.
I've finally moved away from LC_MESSAGES=C on my main
development system half a year ago and finally spotted
that a grep for "Stop\.$" stopped to yield anything now.
This subprofile is akin to THE_* variables family: the configuration
bits and script hooks sitting there influence whatever chroot is
declared to be the user facing one in the end, whether it comes
from vm image or live subprofile.
The services feature ought to be a changeset of its own which would
be based on rootfs and become the base for ve/vm changes but I chose
to just do it atomically; some pre-existing duplicates are pruned now.
This one is a part of a larger rewrite to move away from
distro-centric build-up to configuration-centric one with
the particular packaging being of secondary importance
compared to actual functionality.
It happens when there are no separate arch/noarch subrepositories
but everything is dumped into a single directory like in installer
or live-builder environment (at least as of today).
Now this is ugly: instead of commoditizing the repetitive code
the result ended up working differently by creating several
repositories for the target subdirs instead of the single one
for the generated subprofile as a whole.
This results in .disk/profile.tgz being basically useless
in every image since c4311108ea.
It appears that manually specified IMAGEDIR, e.g. by adding
IMAGEDIR = ~/out/$(shell date +%Y%m%d)
to ~/.mkimage/profiles.mk, might be problematic due to
missing globbing. Let's make sure the paths are globbed
and directories are created -- since make's wildcard()
returns an empty string when there's nothing there [yet].
Somewhat kludgy unfortunately and might need even more tweaking,
I have only armv7l board handy at the moment to verify that
the transformation is going to work.
QEMU is bailing out here and now ("Exec format error").
Example sources.list.sisyphus.armh of the season:
rpm http://ftp.altlinux.ru/pub/people/asdus/sisyphus armh classic
rpm http://ftp.altlinux.ru/pub/people/asdus/sisyphus noarch classic
ildar@ noted that the test involving whitespace is too
quirky for some quirky enough cases like
rpm-dir file:/var/cache/apt/archives . x86_64
-- let's introduce word boundaries there.
This is thanks to the fact that alterator-based install2 needs
alterator-browser-qt which needs X11 which needs working device drivers
-- and at least AMD C60 APU would only yield a nice dotted white screen
without that firmware.
Roughly the same for X11 bearing LiveCD images.
See http://www.opennet.ru/openforum/vsluhforumID3/86239.html#1
for a query that has led to this one; in particular,
- xdm dropped (won't log in root and there are no users yet);
- network is brought up and configured via DHCP by default;
- apt-get works out-of-box;
- default image size is twice the chroot size.
This isn't ready for general consumption (just as centos one)
but the notion of REPO is floating around along with apt-conf
thoughts, and it might still be useful to someone poking around
conf.d/test.mk.
Request hasher-pkg-init.spec from mike@ or led@ if interested;
the experiments were carried out using openSUSE 11.4 repository
and slightly patched hasher (cpio blacklist for devices).
That sub/stage2/install2 was somewhat clumsy actually as it looked
like a hierarchical thing while being a substitution thing:
generic stage2 would get put in place renamed as install2.
This could only get worse with hierarchical features which have
already been both requested and considered for quite a time,
and "stage2 at install2" reads much more naturally.
There were heaps of "if type -t git" there already;
it wasn't an unintentional mishap but rather a moderate
copy-paste to get the use cases, and now these seem to
have essentially settled.
So time to scrap some dups.
NB: the scripts in the generated profile can't rely on
the contents of the metaprofile (these need to be able
to work in standalone case either), so a bit of crap
still lurks there.
The prerequisites for a cleanup after a successful build
were somewhat weird at this point; now the rules are:
- if DEBUG level is more than 1 or CHECK is set, don't do it;
- otherwise if at least one of the following conditions is true:
+ there's more than one target being built in a row;
+ the build was run by e.g. alterator-mkimage;
+ metaprofile directory is read only
...then do a distclean.
If these are still weird or feel unsuitable for profile hacking,
drop me a note (or a patch).
Actually the templates pretending to be usable missed the whole
interactivesystem (sysvinit would get pulled in by services as well).
Fixed somewhat but time and practice will tell.
mkimage and hasher can make use of qemu to run
non-native binaries while working on the chroots;
thanks kas@, manowar@ and sbolshakov@ for implementing
this functionality as well as providing nice examples
through mkimage-profiles-arm and mkimage-profile-armrootfs.
This required the architecture check to be added since baking
a tarball with "arm" as its specified arch and x86_64 inside
isn't particularly good thing to let slip through; however
the implementation is quite fragile, bugreports and patches
are seriously welcome.
NB: APTCONF evaluation order between lazy make and nimble shell
turned out to be quite a delicate issue in this particular case.
The only thing to be fixed was setarch(8) symlinks assumption
that is correct for x86 but not for ARM.
There's also some hasher(7) setup to be done:
mkdir -p ~/.hasher
echo >> ~/.hasher/config <<-EOF
def_target=arm
#cache_dir=$HOME/tmp # depends on RAM/storage configuration
EOF
...and of course apt(8) should be properly set up too.
An example PoC build on a CM-A510 board (tmpfs):
$ make BRANDING=altlinux-centaurus ve/bare.tar.gz
** ARCH: arm
18:10:45 initializing BUILDDIR: build/
18:10:45 preparing distro config: build/distcfg.mk
18:10:46 starting image build: tail -f build/build.log
18:14:49 done (4:02)
** image: $TMP/out/bare-20120706-arm.tar.gz [23M]
There's no need to repeat the typical openssh-* triade
all over the place; those who need server and client
are better off pulling in "openssh" pkglist, and those
needing a particular package should specify it.
Yes, mkimage-profiles is now able to build VM disk images.
So far the support is pretty basic:
- a single hard drive image with a single partition/FS
- only stock root password is configurable
- LILO is hardwired as a bootloader
The resulting images tend to boot under qemu/kvm though.
Please see doc/vm.txt for the warning regarding additional
privileges and setup required. This was started back in
February but I still hoped to avoid sudo/privileged helper
(and libguestfs is almost as undistributable as can be)...
Thanks:
- http://blog.quinthar.com/2008/07/building-1gb-bootable-qemu-image-using.html
- Alexey Morarash who reworked that as https://github.com/tuxofil/linsygen
- led@, legion@, vitty@, aen@ for providing advice and inspiration
It somehow managed to evade me that $(TMP) might be uninitialized;
definitely should be checked before stuffing into sed substitution
command.
NB: this could be done in pure make but my take was less readable.
Thanks shadowsbrother/gmail for hitting and reporting this.
Just like livecd-install, graphical installer KMS support
looks better as an optional part of install2 feature.
Of course it's optional only if the release manager is fine
with VESA drivers and not KMS-requiring intel/radeon/nouveau;
thanks led@ for a confirmation just in case.
This further refines the modular build by making
metadata being a clearly separated feature rather
than having to rely on runtime tests, and also by
moving the code which cares for kernel bits of base
installation (.base list) in a feature of its own.
There's more to it but let's get the ball rolling first.
It's hard to tell a successful build from a failed one
if downstream hides the exit code; it's useless to continue
a `for' loop if a pipe shoves that to a subshell; well it seems
that a bashism is worth a thousand quirks with extra fds here.
Minor regexp enhancements are also due.
reports.mk made a bit more resilient/prudent either.
Sometimes it's desirable to provide the kernel supporting
maximal amount of RAM on the system; bad news is that x86
has a kludge named PAE, good news is that x86_64 doesn't
need it at all; but now we must be able to choose between
those.
BIGRAM will hold the flavour needed.
Initial SPICE support has been added for kvm/libvirt installation
and boot-up using qxl and spice by default as proposed by shaba@.
VirtualBox part is shifted a level deeper correspondingly
but otherwise stays the same.
A pretty common issue breaking the image build is inter-package
file conflict resulting in hsh-install failure down there.
Let's bring that back to attention conveniently.
There is at least one known deficiency for mkimage-profiles:
build.log will be truncated if verbose mode is enabled and
hasher version is lower than 1.3.22.
The check is done here since it's where the logging is arranged,
and doing it in image.in/Makefile would result in the warning
about log-truncating software being truncated by the said software.
Thanks Max Kosmach for reporting this inobviousity.
The output was still somewhat ragged in 80x24 terminal window
with fmt(1) which wasn't anticipating the word length difference
subsequent column(1) would have to cope with later on.
Thanks Loic Cattani for his shell columnizer implementation:
https://github.com/Arko/Columnize
As was noted by Alexey Shabalin in libosinfo context,
current ALT Linux images tend to lack ISO9660 metadata
-- which they did have back in the day of Master 2.4.
Please note that the data collection occurs this way
due to mkimage's config.mk resetting the values to be
empty; this was worked around by using another config
file, $(BUILDDIR)lib/iso.mk, and including it later
but that would require a separate target with per-target
CONFIG variable which isn't elegant at all given the need
to actually build up the metadata set.
So the variables were changed (to be more readable anyways)
and then proxied back to BOOT_*. This might be cleaned up
some day after the inclusion order is tweaked or mkimage
defaults get set-if-unset-yet (?=).
